Earlier commits ensured proper muxing of pins related to proper
TWL6030 behavior: see commit 265a2bc8 (ARM: OMAP3: TWL4030: ensure
sys_nirq1 is mux'd and wakeup enabled) and commit 1ef43369 (ARM:
OMAP4: TWL: mux sys_drm_msecure as output for PMIC).
However these only fixed legacy boot and not DT boot. For DT boot,
the default mux values need to be set properly in DT.
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxx>
---
Applies on v3.10-rc2
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++++++++
arch/arm/boot/dts/omap4-sdp.dts | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 03bd60d..a7a9bc0 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -59,6 +59,7 @@
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
+ &twl6030_pins
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
@@ -66,6 +67,13 @@
&tpd12s015_pins
>;
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ 0x14 0x0 /* fref_clk0_out.sys_drm_msecure OUTPUT */
+ >;
+ };
+
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index a35d9cd..5ad0c10 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -145,6 +145,7 @@
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
+ &twl6030_pins
&twl6040_pins
&mcpdm_pins
&dmic_pins
@@ -179,6 +180,13 @@
>;
};
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ 0x14 0x0 /* fref_clk0_out.sys_drm_msecure OUTPUT */
+ >;
+ };
+
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
--
1.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
