Felipe Balbi <balbi@xxxxxx> writes:
> those USB bits work fine, so we can enable them
> safely. Plus, without USB_PHY EHCI wouldn't work
> and it would take quite a few bogus error reports
> until all users got the new changes.
>
> Signed-off-by: Felipe Balbi <balbi@xxxxxx>
> ---
>
> comiple tested only. Would be great to have someone
> testing on actual HW. Right now I don't have access
> to my HW.
>
> cheers
>
> arch/arm/configs/omap2plus_defconfig | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> index c1ef64b..a1fc0ca 100644
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -74,6 +74,7 @@ CONFIG_CMA=y
> CONFIG_CONNECTOR=y
> CONFIG_DEVTMPFS=y
> CONFIG_DEVTMPFS_MOUNT=y
> +CONFIG_OMAP_OCP2SCP=y
> CONFIG_MTD=y
> CONFIG_MTD_CMDLINE_PARTS=y
> CONFIG_MTD_CHAR=y
> @@ -206,10 +207,18 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_SUSPEND=y
> CONFIG_USB_MON=y
> +CONFIG_USB_EHCI_HCD=y
NAK (on this particular change)
This cannot be enable by default yet as EHCI *still* breaks core
retention[1] (which has been broken since at least v3.5, almost a year
now.)
> CONFIG_USB_WDM=y
> CONFIG_USB_STORAGE=y
> CONFIG_USB_LIBUSUAL=y
> +CONFIG_USB_DWC3=m
> +CONFIG_USB_DWC3_DEBUG=y
> +CONFIG_USB_DWC3_VERBOSE=y
> CONFIG_USB_TEST=y
> +CONFIG_USB_PHY=y
> +CONFIG_NOP_USB_XCEIV=y
These two are needed though since before v3.10, they used to be
selected, and without them USB host doesn't work on Panda anymore.
> +CONFIG_OMAP_USB2=y
> +CONFIG_OMAP_USB3=y
I guess these are for OMAP5? The changelog should probably describe
which bits are for which platforms for those of us not intimate with
USB.
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_DEBUG=y
> CONFIG_USB_GADGET_DEBUG_FILES=y
Kevin
[1]
commit 06b4ba529528fbf9c24ce37b7618f4b0264750e2
Author: Kevin Hilman <khilman@xxxxxx>
Date: Fri Jul 6 11:20:28 2012 -0700
ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it
The EHCI driver is not stable enough to be enabled by default. In v3.5,
it has at least the following problems:
- warning dump during bootup
- hang during suspend
- prevents CORE powerdomain from entering retention during idle (even
when no USB devices connected.)
This demonstrates that this driver has not been thoroughly tested and
therfore should not be enabled in the default defconfig.
In addition, the problems above cause new PM regressions which need be
addressed before this driver should be enabled in the default
defconfig.
Signed-off-by: Kevin Hilman <khilman@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
