On Thu, May 23, 2013 at 08:02:05PM +0100, Jon Hunter wrote:
> On 22/05/13 22:20, Aaro Koskinen wrote:
> > On Tue, May 21, 2013 at 08:37:16PM +0100, Jon Hunter wrote:
> >> On 21/05/13 18:39, Aaro Koskinen wrote:
> >>> On Mon, May 20, 2013 at 10:46:21AM -0700, Tony Lindgren wrote:
> >>>> * Tony Lindgren <tony@xxxxxxxxxxx> [130516 14:50]:
> >>>>> * Aaro Koskinen <aaro.koskinen@xxxxxx> [130516 14:05]:
> >>>>>> On Thu, May 16, 2013 at 11:09:34AM -0700, Tony Lindgren wrote:
> >>>>>>> * Aaro Koskinen <aaro.koskinen@xxxxxx> [130513 13:58]:
> >>>>>>>> I tested 3.10-rc1 on OMAP1 / Nokia 770, and Retu MFD probe is broken:
> >>>>>>>>
> >>>>>>>> [ 2.264221] retu-mfd 2-0001: Retu v3.2 found
> >>>>>>>> [ 2.281951] retu-mfd 2-0001: Failed to allocate IRQs: -12
> >>>>>>>> [ 2.300140] retu-mfd: probe of 2-0001 failed with error -12
> >>>>>>>>
> >>>>>>>> The error is coming from regmap code. According to git bisect, it is
> >>>>>>>> caused by:
> >>>>>>>>
> >>>>>>>> commit ede4d7a5b9835510fd1f724367f68d2fa4128453
> >>>>>>>> Author: Jon Hunter <jon-hunter@xxxxxx>
> >>>>>>>> Date: Fri Mar 1 11:22:47 2013 -0600
> >>>>>>>>
> >>>>>>>> gpio/omap: convert gpio irq domain to linear mapping
> >>>>>>>>
> >>>>>>>> The commit does not anymore revert cleanly, and I haven't yet tried
> >>>>>>>> crafting a manual revert, so any fix proposals/ideas are welcome...
> >>>>>>>
> >>>>>>> Hmm this might be a bit trickier to fix. Obviously the real solution
> >>>>>>> is to convert omap1 to SPARSE_IRQ like we did for omap2+.
> >>>>>>>
> >>>>>>> For the -rc cycle, it might be possible to fix this by adding a
> >>>>>>> different irq_to_gpio() and gpio_to_irq() functions for omap1.
> >>>>>>
> >>>>>> The commit reverts cleanly if we also revert
> >>>>>> 3513cdeccc647d41c4a9ff923af17deaaac04a66 (gpio/omap: optimise interrupt
> >>>>>> service routine), which seems to be just some minor optimization. The
> >>>>>> result is below, and with it 770 works again.
> >>>>>
> >>>>> Hmm in this case it seems that we should just fix it rather than go back
> >>>>> to the old code, so let's take a look at that first.
> >>>>
> >>>> Does the following fix it for you or do we need to fix something else
> >>>> there too?
> >>>
> >>> Thanks, that fixes Retu probe on 770.
> >>
> >> Sorry for not responding sooner, but I have been moving.
> >>
> >> From looking at the code it appears that the regmap_add_irq_chip()
> >> is failing in the retu driver. I am not sure if this will work,
> >> but have you tried making the following change to the retu driver
> >> so that it also uses irq_domain_add_linear() as well? Just a thought ...
> >
> > This will trigger WARNING: at drivers/base/regmap/regmap-irq.c:514.
>
> Sorry, there is another change needed. Can you try ...
I don't see much improvement with this. Although Retu probe succeeds,
genirq error logs are still there. Also none of the GPIO irqs used by
other drivers seem to be working at all, e.g. touchscreen.
A.
> diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c
> index a183098..9080cd6 100644
> --- a/drivers/mfd/retu-mfd.c
> +++ b/drivers/mfd/retu-mfd.c
> @@ -267,14 +267,13 @@ static int retu_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> if (ret < 0)
> return ret;
>
> - ret = regmap_add_irq_chip(rdev->regmap, i2c->irq, IRQF_ONESHOT, -1,
> + ret = regmap_add_irq_chip(rdev->regmap, i2c->irq, IRQF_ONESHOT, 0,
> rdat->irq_chip, &rdev->irq_data);
> if (ret < 0)
> return ret;
>
> ret = mfd_add_devices(rdev->dev, -1, rdat->children, rdat->nchildren,
> - NULL, regmap_irq_chip_get_base(rdev->irq_data),
> - NULL);
> + NULL, 0, regmap_irq_get_domain(rdev->irq_data));
> if (ret < 0) {
> regmap_del_irq_chip(i2c->irq, rdev->irq_data);
> return ret;
>
> > Also other drivers report GPIO IRQ issues later in the boot, e.g.
> >
> > [ 3.907928] genirq: Flags mismatch irq 0. 00000001 (serial wakeup) vs. 00002000 (RETU)
> > [ 3.923706] No interrupt for UART wake GPIO: 37
>
> Looks like the gpio is just conflicting with the RETU driver.
>
> > With Tony's patch (without any Retu modifications), the boot is clean. So
> > I guess gpio-omap fix is needed.
>
> Ideally it would be good if the RETU can use linear domains and then may be this
> can be avoided.
>
> Cheers
> Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
