On Mon, 15 Apr 2013, Roger Quadros wrote: > Don't select NOP_USB_XCEIV. Instead, board config > must select USB_PHY and the appropriate PHY driver. > > Also add a hint in Kconfig so that users enabling > this driver manually enable the right PHY drivers as well. > > Gets rid of the below warnings when USB_EHCI_HCD_OMAP > is enabled. > > warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY) > warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY) > > CC: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> > Signed-off-by: Roger Quadros <rogerq@xxxxxx> > --- > drivers/usb/host/Kconfig | 4 +++- > 1 files changed, 3 insertions(+), 1 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index c0be25c..c558472 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -150,11 +150,13 @@ config USB_EHCI_MXC > config USB_EHCI_HCD_OMAP > tristate "EHCI support for OMAP3 and later chips" > depends on ARCH_OMAP > - select NOP_USB_XCEIV > default y > ---help--- > Enables support for the on-chip EHCI controller on > OMAP3 and later chips. > + If your system uses a PHY on the USB port, you will need to > + enable USB_PHY and the appropriate PHY driver as well. Most > + boards need the NOP_USB_XCEIV PHY driver. > > config USB_EHCI_HCD_ORION > tristate "Support for Marvell EBU on-chip EHCI USB controller" Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
