I'm trying to work out how to setup my custom dts file to support dual ethernet.
This is on a custom board based on the BeagleBone, but with both ethernet ports connected in MII mode.
So far I have just copied the layout of am335x-evm.dts, but that only gives me eth0:-
[ 1.418487] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 1.424952] davinci_mdio 4a101000.mdio: detected phy mask fffffffc
[ 1.434455] libphy: 4a101000.mdio: probed
[ 1.438790] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 1.448486] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver SMSC LAN8710/LAN8720
[ 1.458585] Random MACID = 82:72:bb:49:3f:49
[ 1.466964] rtc-ds1307 0-0068: setting system clock to 2013-04-11 16:15:37 UTC (1365696937)
[ 1.478107] net eth0: initializing cpsw version 1.12 (0)
[ 1.486109] net eth0: phy found : id is : 0x7c0f1
[ 1.491696] net eth0: phy found : id is : 0x7c0f1
I added:-
mac: ethernet@4a100000 {
dual_emac = <1>;
};
... which gives me eth0 and eth1, but kills my nfs root:-
[ 1.444534] libphy: 4a101000.mdio: probed
[ 1.448842] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 1.458422] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver SMSC LAN8710/LAN8720
[ 1.468439] Random MACID = 1e:5b:03:c9:a4:f7
[ 1.475683] cpsw: Random MACID = 66:56:fa:5e:9f:19
[ 1.484027] rtc-ds1307 0-0068: setting system clock to 2013-04-11 16:50:32 UTC (1365699032)
[ 1.494911] net eth0: initializing cpsw version 1.12 (0)
[ 1.503727] net eth0: phy found : id is : 0x7c0f1
[ 4.579126] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 4.608561] IP-Config: Guessing netmask 255.0.0.0
[ 4.613910] IP-Config: Complete:
[ 4.617307] device=eth0, hwaddr=1e:5b:03:c9:a4:f7, ipaddr=10.0.101.111, mask=255.0.0.0, gw=10.0.0.100
[ 4.627473] host=10.0.101.111, domain=, nis-domain=(none)
[ 4.633613] bootserver=255.255.255.255, rootserver=10.0.0.100, rootpath=
[ 4.665520] VFS: Mounted root (nfs filesystem) on device 0:12.
[ 4.673877] devtmpfs: mounted
[ 4.677461] Freeing init memory: 196K
Starting logging: OK
Initializing random number generator... done.
Starting network...
ip: RTNETLINK answers: File exists
ip: RTNETLINK answers: File exists
[ 5.449203] net eth1: initializing cpsw version 1.12 (0)
[ 5.456180] net eth1: phy found : id is : 0x7c0f1
udhcpc (v1.20.2) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
Starting dropbear sshd: OK
Welcome to Buildroot
nanobone login: root
Password:
# ps
[ 27.729217] nfs: server 10.0.0.100 not responding, still trying
I know this should work (since the svm has dual ethernet), so can anyone give me some pointers ?
Cheers
Mark J.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
