According to Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
the "#interrupt-cells" property of an "interrupt-controller" is used
to define the number of cells needed to specify a single interrupt.
A commonly used variant is two cell on which #interrupt-cells = <2>
and the first cell defines the index of the interrupt in the controller
while the second cell is used to specify any of the following flags:
- bits[3:0] trigger type and level flags
1 = low-to-high edge triggered
2 = high-to-low edge triggered
4 = active high level-sensitive
8 = active low level-sensitive
An example of an interrupt controller which use the two cell format is
the OMAP GPIO controller that allows GPIO lines to be used as IRQ
(Documentation/devicetree/bindings/gpio/gpio-omap.txt)
But setting #interrupt-cells = <2> on the OMAP GPIO device node and
specifying the GPIO-IRQ type and level flags on the second cell does not
store this value on the populated IORESOURCE_IRQ struct resource.
This is because when using an IRQ from an interrupt controller and
setting both cells (e.g:)
interrupt-parent = <&gpio6>;
interrupts = <16 8>;
A call to of_irq_to_resource() is made and this function calls
irq_of_parse_and_map_type() to get the virtual IRQ mapped to the real
index for this interrupt controller. This IRQ number is populated on
the struct resource:
int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
{
int irq = irq_of_parse_and_map(dev, index);
..
r->start = r->end = irq;
}
irq_of_parse_and_map() calls to irq_create_of_mapping() which calls to
the correct xlate function handler according to "#interrupt-cells"
(irq_domain_xlate_onecell or irq_domain_xlate_twocell) and to
irq_set_irq_type() to set the IRQ type.
But the type is never returned so it can't be saved on the IRQ struct
resource flags member.
This means that drivers that want to get the IRQ edge/level flags
defined in the Device Tree from a struct resource will not be able
to get it.
Drivers can get the IRQ flags by using irq_get_irq_data(irq) and
irqd_get_trigger_type(irq_data) but this will unnecessary expose
irq_data to callers and also is more error prone.
So, is better to add an irq_get_trigger_type() function to obtain
the edge/level flags for an IRQ.
Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---
Changes since v1:
- use irqd_get_trigger_type() instead of a direct access to
d->state_use_accessors as suggested by Stephen Warren.
include/linux/irq.h | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/include/linux/irq.h b/include/linux/irq.h
index bc4e066..0e8e3a6 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -579,6 +579,12 @@ static inline struct msi_desc *irq_data_get_msi(struct irq_data *d)
return d->msi_desc;
}
+static inline u32 irq_get_trigger_type(unsigned int irq)
+{
+ struct irq_data *d = irq_get_irq_data(irq);
+ return d ? irqd_get_trigger_type(d) : 0;
+}
+
int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node,
struct module *owner);
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
