* Roger Quadros <rogerq@xxxxxx> [130419 01:23]: > On 04/18/2013 11:09 PM, Tony Lindgren wrote: > > > the naming should be mode0name.modename to be consistent. Here's > > what I dumped out, please check and replace spaces with tabs: > > > > 0x82 0x10c /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk gpio84 INPUT_PULLDOWN | MODE4 */ > > 0x84 0x4 /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp gpio85 OUTPUT | MODE4 */ > > 0x86 0x104 /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir gpio86 INPUT | MODE4 */ > > 0x88 0x104 /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt gpio87 INPUT | MODE4 */ > > 0x8a 0x104 /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 gpio88 INPUT | MODE4 */ > > 0x8c 0x104 /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 gpio89 INPUT | MODE4 */ > > 0x8e 0x104 /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 gpio90 INPUT | MODE4 */ > > 0x90 0x104 /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 gpio91 INPUT | MODE4 */ > > 0x92 0x104 /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 gpio92 INPUT | MODE4 */ > > 0x94 0x104 /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 gpio93 INPUT | MODE4 */ > > 0x96 0x104 /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 gpio94 INPUT | MODE4 */ > > 0x98 0x104 /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 gpio95 INPUT | MODE4 */ > > I don't think gpioXX is necessary as we aren't using any of them as GPIOs. Oops sorry yeah please check as that's something I just dumped from the system. The gpio numbering is just data for debugging that you can leave out. Also check please check I dumped the right pins, I just grepped for usbb1. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html