This should work assuming the board-4430sdp.c works, but it seems that I don't have the "1283 PG 2.21 connectivity device" on my blaze. Anybody got a spare connectivity device for blaze? Also, if somebody has the schematics, please provide a patch for the missing GPIO muxes for blaze, see the the panda for what's currently missing. Cc: Luciano Coelho <coelho@xxxxxx> Cc: Benoit Cousson <b-cousson@xxxxxx> Cc: Rajendra Nayak <rnayak@xxxxxx> Cc: Ruslan Bilovol <ruslan.bilovol@xxxxxx> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/boot/dts/omap4-sdp.dts | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index a35d9cd..c13c483 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -140,6 +140,19 @@ "DMic", "Digital Mic", "Digital Mic", "Digital Mic1 Bias"; }; + + /* regulator for wl12xx on sdio5 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 22 0>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &omap4_pmx_core { @@ -275,6 +288,26 @@ 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ >; }; + + /* wl12xx GPIO output for WLAN_EN */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x3c 0x3 /* gpmc_nwp.gpio_54 OUTPUT | MODE3 */ + >; + }; + + /* wl12xx GPIO inputs and SDIO pins */ + wl12xx_pins: pinmux_wl12xx_pins { + pinctrl-single,pins = < + 0x3a 0x103 /* gpmc_ncs3.gpio_53 INPUT | MODE3 */ + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP | MODE0 */ + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP | MODE0 */ + 0x10c 0x118 /* sdmmc5_dat0.sdmmc5_dat0 INPUT_PULLUP | MODE0 */ + 0x10e 0x118 /* sdmmc5_dat1.sdmmc5_dat1 INPUT_PULLUP | MODE0 */ + 0x110 0x118 /* sdmmc5_dat2.sdmmc5_dat2 INPUT_PULLUP | MODE0 */ + 0x112 0x118 /* sdmmc5_dat3.sdmmc5_dat3 INPUT_PULLUP | MODE0 */ + >; + }; }; &i2c1 { @@ -400,8 +433,12 @@ }; &mmc5 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; bus-width = <4>; - ti,non-removable; + cap-power-off-card; }; &emif1 { -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html