Linux IDE
[Prev Page][Next Page]
[PATCH] libata-core/sff: Fix multiple assumptions about DMA,
Alan Cox
[PATCH] libata: Correct abuse of language,
Alan Cox
[PROBLEM] CDROM not ready. Make sure there is a disc in the drive.,
Srihari Vijayaraghavan
shutdown.html update,
Tejun Heo
[PATCH 0/6] libata: ATA passthru fixes,
Albert Lee
Rescue question,
David Mills
[PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 3),
Sergei Shtylyov
[PATCH pata-2.6 fix] hpt366: disallow Ultra133 for HPT374,
Sergei Shtylyov
Promise TX4 (PDC40718) hotplug support,
Jan Kasprzak
[PATCH] libata: fix hw_sata_spd_limit initialization,
Tejun Heo
[PATCH 2.6.22-rc4] libata: SiS180 pata support,
Uwe Koziolek
[PATCH] Add configuration to specify availability of pata_platform,
Ben Dooks
Re: [Bugme-new] [Bug 8587] New: disk on promise pdc20378 disabled at boot,
Andrew Morton
Re: [2/2] 2.6.22-rc4: known regressions with patches,
Michal Piotrowski
Re: [4/5] 2.6.22-rc4: known regressions,
Michal Piotrowski
[PATCH] remove unused variable in pata_isapnp,
Yoichi Yuasa
[PATCH 1/1] libata: print device model and firmware revision for ATAPI devices,
Albert Lee
[PATCH 0/3] libata: minor pio fixes,
Albert Lee
Fwd: [Bug 8441] libata: irq nobody cared during polling IDENTIFY,
Natalie Protasevich
legacy libata IDE missing reservation,
Jeff Garzik
Add support to Marvell 6121 in the mv-ahci-pata branch,
Jose Alberto Reguero
[PATCH 1/1] ide: ide-generic, add another device exception,
Jiri Slaby
[PATCH] [2.6.22] libata: fix probe time irq printouts,
Olof Johansson
[PATCH 3/2] serverworks: always tune CSB6,
Bartlomiej Zolnierkiewicz
[PATCH] Replace C code with call to ARRAY_SIZE() macro.,
Robert P. J. Day
[Linux 2.6.21.3] CDRW drive not recognised by PATA (ata_piix),
Chris Rankin
SATA hotswap and write caches,
Michel Lespinasse
[PATCH] it821x: RAID mode fixes,
Bartlomiej Zolnierkiewicz
[PATCH 1/2] serverworks: remove crappy code,
Bartlomiej Zolnierkiewicz
[PATCH 2/2] serverworks: fix CSB6 tuning logic,
Bartlomiej Zolnierkiewicz
2.6.22-rc3 hibernate(?) disables SMART on ide,
David Greaves
Re: HPT374 IDE problem with 2.6.21.* kernels,
Andrew Morton
Re: 2.6.22 libata spindown,
Jeff Garzik
Re: [2/3] 2.6.22-rc3: known regressions with patches v2,
Michal Piotrowski
Re: [2/3] 2.6.22-rc3: known regressions v2,
Michal Piotrowski
YuLin: Where can I get the newest source of sata_sis?,
俞琳
Re: [smartmontools-support] Adaptec RAID 1200A (Highpoint HPT370A)access problem,
sam song
Compact Flash performance...,
Daniel J Blueman
sata_nv: Hitachi HDS7250S - ADMA,
David Milburn
Re: [2/4] 2.6.22-rc3: known regressions,
Michal Piotrowski
Re: [2/3] 2.6.22-rc3: known regressions with patches,
Michal Piotrowski
Re: [PATCH] pata_sis: FIFO whack,
Jeff Garzik
[PATCH] Convert sata_sx4 to new libata EH,
Jeff Garzik
Re: Linux v2.6.22-rc3,
Gregor Jasny
[PATCH] Add Marvell 6141 PATA support to AHCI driver,
Jeff Garzik
[PATCH] convert sata_qstor to new libata EH,
Jeff Garzik
[PATCH] convert pdc_adma to new libata EH,
Jeff Garzik
VIA VT6420: SATA disconnects,
Vasily Averin
sil680 MMIO changes moved to branch,
Jeff Garzik
Re: [patch 03/11] Optional LED trigger for libata,
Jeff Garzik
Re: HPT366 not enabled by kernel 2.6.21.2,
Bartlomiej Zolnierkiewicz
2.6.22-rc2: known regressions with patches,
Michal Piotrowski
Intel AHCI generating spurious completions during NCQ errors,
Paul Erkkila
libata interface fatal error,
Florian Effenberger
software raid faster than raw disk?,
Siim Vahtre
Re: JMicron JMB363 issue fixed / ICH8 RAID volume trace,
Andrew Paprocki
[PATCH 2.6.22-rc2] libata: sata_sis fixes,
Uwe Koziolek
[BUG] 2.6.21.1: ide-pci is not finding ide controller.,
Linas Vepstas
[PATCH] Be more paranoid about controller setup and initial setup (for testing),
Alan Cox
[PATCH] libata: don't consider 0xff as port empty if SStatus is available,
Tejun Heo
[PATCH] ata: pata_platform: Disable prereset logic.,
Paul Mundt
sata_mv driver,
Wakko Warner
new libata-code breaks functionality of sata_sis,
Uwe Koziolek
Re: [PATCH] sata_promise: Port enumeration order - SATA 150 TX4,,
Mikael Pettersson
Re: [PATCH] ahci: disable 64bit dma on sb600,
Srihari Vijayaraghavan
JMicron JMB361 sporadically failing to initialize from at least 2.6.18.4 to 2.6.22-rc2,
Andrew Paprocki
[git patches] libata fixes and administrivia,
Jeff Garzik
[patch 12/69] sata_via: add missing PM hooks,
Chris Wright
[PATCH] libata: replace ap->cbl tests with ATA_FLAG_SATA tests,
Tejun Heo
Add Seagate STT20000A to DMA blacklist.,
Dave Jones
[PATCH] libata: Allow a controller specific post bus reset method,
Alan Cox
[PATCH] libata: Kiss post_set_mode goodbye,
Alan Cox
[PATCH] ata_piix: clean up,
Alan Cox
[PATCH] libata: Handle SATA bridges better,
Alan Cox
[PATCH] pata_sis: Fix and clean up some timing setups,
Alan Cox
[PATCH] hpt3x2n: Correct revision boundary,
Alan Cox
[PATCH] pata_hpt366: Enable bits are unreliable so don't use them,
Alan Cox
[PATCH] ata_piix: add short 40c quirk for Acer Aspire 2030,
Tejun Heo
sata via lockups,
Michal Suchanek
Re: something strange in libata-core.c for kernel 2.6.22-rc3,
Robert Hancock
Re: sd_resume redundant? [was: [PATCH] libata: implement ata_wait_after_reset()],
Randy Dunlap
Re: [3/5] 2.6.22-rc2: known regressions,
Michal Piotrowski
[PATCH] pata_sil680: compile fix,
Tejun Heo
[PATCH] ahci: add Marvell support (WIP),
Jeff Garzik
[PATCH] sata_mv: new exception handling (hotplug, NCQ framework),
Jeff Garzik
[PATCH] sata_sil: Greatly improve DMA support,
Jeff Garzik
[PATCH/REDIFF] Cleanup libata HPA support,
Ben Collins
RE: [PATCH] drivers/ata: Add the SW NCQ support to sata_nv for MCP51/MCP55/MCP61,
Kuan Luo
[PATCH] Add two missing chipsets to drivers/ide/ide-proc.c,
Mika Kukkonen
sata_promise driver failed with Promise SATA300 TX4,
Theo Baumgartner
[PATCH] libata: remove libata.spindown_compat,
Tejun Heo
[PATCH] ide.c: microscopic size and readability optimization,
Borislav Petkov
sata_via, 2.6.22-rc1, VT6421A,
Tim Valenzuela
Re: [2/3] 2.6.22-rc1: known regressions v2,
Michal Piotrowski
2.6.22-rc1-mm1: IDE compile error,
Adrian Bunk
SATA intel High loads due to writes vs ata_piix switch,
Fortier,Vincent [Montreal]
[PATCH] ide/pci/serverworks.c: Fix corruption/timeouts with MegaIDE in RAID mode,
Alan Cox
[PATCH/RFC 0/8] libata: delegate irq driven pio to workqueue (take 2),
Albert Lee
=?utf-7?b?K0FGcy1QQVRDSCAzLzQrQUYwLWFkZCB0aGUgSURFIGRldmljZSBJRA==?==?utf-7?b?IGZvciBBVEkgU0I3MDA=?=,
Henry Su
=?utf-7?b?K0FGcy1QQVRDSCAyLzQrQUYwLSBhZGQgdGhlIElERSBhbmQgU0FUQQ==?==?utf-7?b?IGRldmljZSBJRHMgZm9yIEFUSSBTQjcwMC4=?=,
Henry Su
=?utf-7?b?K0FGcy1QQVRDSCAxLzQrQUYwLSBhZGQgdGhlIFNNQnVzIGRldmljZQ==?==?utf-7?b?IElEIGZvciBBVEkgU0I3MDA=?=,
Henry Su
Re: [PATCH] drivers/ata: correct a wrong free function for sata_nv driver,
Jeff Garzik
[git patches] IDE updates/fixes,
Bartlomiej Zolnierkiewicz
Re: [PATCH]add the IDE device ID for ATI SB700,
Bartlomiej Zolnierkiewicz
Serial ATA (SATA) shutdown info,
Scott James Remnant
Re: IT821x: no DMA since 2.6.21,
Alan Cox
[PATCH] libata: track spindown status and skip spindown_compat if possible,
Tejun Heo
[PATCH] libata: Add MMIO support to pata_sil680,
Benjamin Herrenschmidt
Fixing halt/shutdown for libata spindown handling,
Daniel Drake
[PATCH] libata: add human-readable error value decoding (v2),
Robert Hancock
[PATCHSET] libata: improve ATA ACPI support, take#3,
Tejun Heo
- [PATCH 1/9] libata: separate out ata_dev_reread_id(),
Tejun Heo
- [PATCH 2/9] libata: during revalidation, check n_sectors after device is configured,
Tejun Heo
- [PATCH 3/9] libata-acpi: add ATA_FLAG_ACPI_SATA port flag,
Tejun Heo
- [PATCH 4/9] libata-acpi: implement ata_acpi_associate(),
Tejun Heo
- [PATCH 6/9] libata-acpi: miscellaneous cleanups,
Tejun Heo
- [PATCH 7/9] libata: reimplement ACPI invocation,
Tejun Heo
- [PATCH 8/9] libata-acpi: remove redundant checks,
Tejun Heo
- [PATCH 9/9] libata-acpi: implement _GTM/_STM support,
Tejun Heo
- [PATCH 5/9] libata-acpi: clean up ata_acpi_exec_tfs(),
Tejun Heo
- Re: [PATCHSET] libata: improve ATA ACPI support, take#3,
Alan Cox
Libata state machine error in 2.6.18.1,
Rune Torgersen
[PATCH] libata: fix shutdown warning message printing,
Tejun Heo
[PATCH 2/5] Use mutex instead of semaphore in IDE driver,
Matthias Kaehlcke
[1/2] 2.6.22-rc1: known regressions,
Michal Piotrowski
Re: [2.6.21.1] SATA freeze,
Robert Hancock
ata/scsi crash on halt,
Andrew Morton
[PATCH] pasemi: electra IDE/pata_platform glue,
Olof Johansson
[PATCH] HPA Detect From Resume,
Lee Trager
ICH7 and SATAII,
Martin Diakov
[PATCH] libata: give devices one last chance even if recovery failed with -EINVAL,
Tejun Heo
sata_mv hotplug status?,
Tomasz Chmielewski
[PATCH/RFC] Fix build failure for drivers/ata/pata_scc.c,
Tony Breeds
[PATCH] drivers/ata/pata_hpt37x.c Remove unused static variable.,
Tony Breeds
[patch 19/20] SCSI: save disk in scsi_device,
akpm
[patch 20/20] libata: send event when AN received,
akpm
[patch 18/20] genhd: send async notification on media change,
akpm
[patch 1/2] sl82c105: Switch to ref counting API,
akpm
[patch 2/2] Use menuconfig objects: IDE,
akpm
[patch 07/20] pata_pcmcia: recognize 2GB CompactFlash from Transcend,
akpm
[patch 11/20] libata: add support for ATA_16 on ATAPI,
akpm
[patch 13/20] Use menuconfig objects: libata,
akpm
[patch 09/20] Add the combined mode for ATI SB700,
akpm
[patch 17/20] libata: expose AN to user space,
akpm
[patch 12/20] libata-core: convert to use cancel_rearming_delayed_work(),
akpm
[patch 15/20] genhd: expose AN to user space,
akpm
[patch 10/20] add the ATI SB700 SATA controller device id to AHCI pci table,
akpm
[patch 16/20] scsi: expose AN to user space,
akpm
[patch 04/20] pata_acpi: restore driver,
akpm
[patch 14/20] libata: check for AN support,
akpm
[patch 05/20] pata_acpi-restore-driver versus libata-clean-up-sff-init-mess,
akpm
[patch 02/20] libata: clean up SFF init mess,
akpm
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]