Linux IDE
[Prev Page][Next Page]
- [PATCH] pdc202xx_new: check ide_config_drive_speed() return value,
Bartlomiej Zolnierkiewicz
- [PATCH] cs5535: check ide_config_drive_speed() return value,
Bartlomiej Zolnierkiewicz
- [PATCH] amd74xx/via82cxxx: check ide_config_drive_speed() return value,
Bartlomiej Zolnierkiewicz
- [PATCH] au1xxx: fix au1xxx_set_pio_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH] icside: use ide_tune_dma(),
Bartlomiej Zolnierkiewicz
- [PATCH] icside: fix ->speedproc to return on unsupported modes (take 5),
Bartlomiej Zolnierkiewicz
- [PATCH] ide: add ide_set{_max}_pio() (take 4),
Bartlomiej Zolnierkiewicz
- [PATCH] pata_mpiix: Forget a conversion,
Alan Cox
- [PATCH] libata: Store bus addresses (versus -mm for testing),
Alan Cox
- [PATCH] pata_cmd64x: Correct the speed ranges,
Alan Cox
- [PATCH] libata-sff; Unbreak non DMA capable controllers again,
Alan Cox
- [PATCH 4/4] libata: ACPI checks for 80wire cable,
Alan Cox
- [PATCH 3/4] libata: ACPI checks for 80wire cable,
Alan Cox
- [PATCH 2/4] libata: ACPI checks for 80wire cable,
Alan Cox
- [PATCH 1/4] libata: ACPI checks for 80wire cable,
Alan Cox
- Please pull for stable ATA,
Jeff Garzik
- Problems with nVidia nForce 520 Chipset,
Craig Block
- sata_nv or port issue?,
Zivago Lee
- libata problem or hard drive failure?,
cyrix12
- PROBLEM: First SATA drive, /dev/sda in RAID 5 stops working a few times a year,
Kyle Brooks
- [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver),
Vitaly Bordug
- Re: Time Problems with 2.6.23-rc1-gf695baf2,
Michal Piotrowski
- Re+: SATA hard drive no longer comes up as /dev/sda on 2.6.22 with Intel ICH6M,
P.C.Chan
- [PATCH] pata_hpt37x: Fix 2.6.22 clock PLL regression,
Alan Cox
- drivers/ide/pci/cs5535.c: array overrun,
Adrian Bunk
- [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH,
Jeff Garzik
- [PATCH] sata_mv: non-working NCQ support,
Jeff Garzik
- [PATCH 12/11] ide-pmac: use ide_tune_dma(),
Bartlomiej Zolnierkiewicz
- [PATCH 11/11] ide-pmac: remove pmac_ide_do_setfeature() (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH 5/11] ide-pmac: remove pmac_ide_{m,u}dma_enable() (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] ide-pmac: PIO mode setup fixes (take 3),
Bartlomiej Zolnierkiewicz
- No equivalent for ide-scsi available with the new PATA drivers?,
Chuck Ebbert
- [2.6.23-rc1] ata_piix: EH pending after completion, repeating EH (cnt=4),
Mikael Pettersson
- [PATCH 11/11] ide-pmac: remove pmac_ide_do_setfeature(),
Bartlomiej Zolnierkiewicz
- [PATCH 10/11] ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature(),
Bartlomiej Zolnierkiewicz
- [PATCH 9/11] ide-pmac: use __ide_wait_stat(),
Bartlomiej Zolnierkiewicz
- [PATCH 8/11] ide-pmac: remove extra good status wait from pmac_ide_do_setfeature(),
Bartlomiej Zolnierkiewicz
- [PATCH 7/11] ide: add __ide_wait_stat() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 6/11] ide: ide_config_drive_speed() bugfixes,
Bartlomiej Zolnierkiewicz
- [PATCH 5/11] ide-pmac: remove pmac_ide_{m,u}dma_enable(),
Bartlomiej Zolnierkiewicz
- [PATCH 4/11] ide-pmac: remove control register messing from pmac_ide_dma_check(),
Bartlomiej Zolnierkiewicz
- [PATCH 3/11] ide-pmac: fix set_timings_mdma(),
Bartlomiej Zolnierkiewicz
- [PATCH 2/11] ide-pmac: pmac_ide_tune_chipset() fixes,
Bartlomiej Zolnierkiewicz
- [PATCH 1/11] ide-pmac: don't check kauai_lookup_timing() return value,
Bartlomiej Zolnierkiewicz
- [PATCH] ide-pmac: PIO mode setup fixes (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] ide-pmac: fix drive->init_speed reporting,
Bartlomiej Zolnierkiewicz
- [PATCH] icside: fix ->speedproc to return on unsupported modes (take 4),
Bartlomiej Zolnierkiewicz
- [BUG] Open Kernel Bugs,
Natalie Protasevich
- [PATCH] fix remaining scr_read/write users and the documentation,
James Bottomley
- [PATCH broken-out-2007-07-20-00-22] drivers/ata/libata-core.c build fix,
Michal Piotrowski
- [PATCH] iomap: Allow space for 64bit I/O ports,
Alan Cox
- PATCH: iomap (Corrected - ignore last one),
Alan Cox
- [PATCH] pata_cs5520: Fix probe bug introduced by 2.6.22 (regression),
Alan Cox
- [PATCH] pata_ali: Correct HP detect,
Alan Cox
- [PATCH] pata_acpi: Rework the ACPI drivers based upon experience of what the BIOS can do,
Alan Cox
- unexpected scsi timeout,
Vasily Averin
- [PATCH 4/4] ide: use only ->set_pio_mode method for programming PIO modes,
Bartlomiej Zolnierkiewicz
- [PATCH 3/4] sis5513: don't change UDMA settings when programming PIO,
Bartlomiej Zolnierkiewicz
- [PATCH 2/4] it8213/piix/slc90e66: don't change DMA settings when programming PIO,
Bartlomiej Zolnierkiewicz
- [PATCH 1/4] alim15x3: PIO mode setup fixes,
Bartlomiej Zolnierkiewicz
- PATA driver for Atmel AVR32,
Kristoffer Nyborg Gregertsen
- [PATCH] ahci: reimplement port_map handling,
Tejun Heo
- [PATCH 2.6.22-git13] libata: add ST9160821AS 3.CLF to NONCQ blacklist,
Tejun Heo
- Re: [Bugme-new] [Bug 8784] New: ata_piix cannot see ICHx IDE devices,
Andrew Morton
- Re: [2/2] 2.6.22-git: known regressions,
Michal Piotrowski
- ata bustage with CONFIG_PM=n,
Andrew Morton
- The surprise and a lot of pleasures are waiting for you! RoRCNk,
Mike
- pata_via with software raid1: "attempt to access beyond end of device",
Dâniel Fraga
- linux 2.6.22 ide regression,
Stephen Clark
- Re: [PATCH] scc_pata.c: Workaround for errata A308 (take 2),
Bartlomiej Zolnierkiewicz
- sata kernel problems, hang for 40 sec,
Farkas Levente
- ALi SATA problem,
Pavel Mateja
- Kernel bug in Fedora 7.,
Serguei Miridonov
- compile error if CONFIG_BLOCK not enabled related to linux/ide.h include,
Kumar Gala
- CONFIG_IDE_PROC_FS: /sys is not full replacement of /proc,
Andrey Borzenkov
- Re: Recommendations on user-space soft/hardreset,
Yasha Okshtein
- [git patches 1/2] warnings: attack valid cases spotted by warnings,
Jeff Garzik
- Re: block/bsg.c,
Bartlomiej Zolnierkiewicz
- [PATCH] ahci.c: fix CONFIG_PM=n compilation,
Alexey Dobriyan
- libata [ata_piix] still no resume from S3 ?,
Rúben Fonseca
- [PATCH] pata_platform: Fix NULL pointer dereference,
Magnus Damm
- Switching controller mode in software?,
Florian Echtler
- [PATCH] pata_scc.c: small fixes (Workaround for errata A308),
Akira Iguchi
- [PATCH] scc_pata.c: Workaround for errata A308 (take 2),
Akira Iguchi
- [patch] libata: fix last_ctl caching in ata_tf_read(),
Chuck Ebbert
- [patch] add more device IDs for supporting SB700 (resend),
su henry
- [PATCHSET 4/4] implement PMP support, take 5,
Tejun Heo
- [PATCHSET 3/4] libata: prep for PMP support, take 5,
Tejun Heo
- [PATCH 02/11] libata-pmp-prep: add @new_class to ata_dev_revalidate(),
Tejun Heo
- [PATCH 03/11] libata-pmp-prep: make a number of functions global to libata,
Tejun Heo
- [PATCH 01/11] libata-pmp-prep: add PMP related constants, fields, ops and update helpers,
Tejun Heo
- [PATCH 04/11] libata-pmp-prep: implement ops->qc_defer(),
Tejun Heo
- [PATCH 05/11] libata-pmp-prep: implement qc_defer helpers,
Tejun Heo
- [PATCH 06/11] libata-pmp-prep: implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMB,
Tejun Heo
- [PATCH 07/11] libata-pmp-prep: implement ATA_LFLAG_NO_RETRY,
Tejun Heo
- [PATCH 09/11] libata-pmp-prep: implement EH fast-fail path,
Tejun Heo
- [PATCH 10/11] libata-pmp-prep: implement ATA_HORKAGE_SKIP_PM,
Tejun Heo
- [PATCH 08/11] libata-pmp-prep: implement ATA_LFLAG_DISABLED,
Tejun Heo
- [PATCH 11/11] libata-pmp-prep: implement sata_async_notification(),
Tejun Heo
- [PATCHSET 2/4] libata: implement ata_link, take 5,
Tejun Heo
- [PATCH 02/14] libata-link: implement and use link/device iterators,
Tejun Heo
- [PATCH 04/14] libata-link: linkify EH action helpers,
Tejun Heo
- [PATCH 01/14] libata-link: introduce ata_link,
Tejun Heo
- [PATCH 10/14] libata-link: add PMP links,
Tejun Heo
- [PATCH 06/14] libata-link: linkify config/EH related functions,
Tejun Heo
- [PATCH 07/14] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags,
Tejun Heo
- [PATCH 09/14] libata-link: implement ata_link_abort(),
Tejun Heo
- [PATCH 05/14] libata-link: linkify reset,
Tejun Heo
- [PATCH 08/14] libata-link: separate out link initialization functions,
Tejun Heo
- [PATCH 03/14] libata-link: linkify PHY-related functions,
Tejun Heo
- [PATCH 11/14] libata-link: update ata_scsi_error() to handle PMP links,
Tejun Heo
- [PATCH 12/14] libata-link: update EH to deal with PMP links,
Tejun Heo
- [PATCH 14/14] libata-link: update Power Management to handle PMP links,
Tejun Heo
- [PATCH 13/14] libata-link: update hotplug to handle PMP links,
Tejun Heo
- Re: [PATCHSET 2/4] libata: implement ata_link, take 5,
Tejun Heo
- [PATCHSET 1/4] libata: misc updates in preparation of PMP support, take #2,
Tejun Heo
- [PATCH 01/21] ahci: build fix for !CONFIG_PM,
Tejun Heo
- [PATCH 03/21] ahci: use deadline instead of fixed timeout for 1st FIS for SRST,
Tejun Heo
- [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis(),
Tejun Heo
- [PATCH 04/21] ahci: separate out ahci_kick_engine(),
Tejun Heo
- [PATCH 05/21] ahci: separate out ahci_exec_polled_cmd(),
Tejun Heo
- [PATCH 09/21] sata_sil24: separate out sil24_do_softreset(),
Tejun Heo
- [PATCH 08/21] sata_sil24: separate out sil24_exec_polled_cmd(),
Tejun Heo
- [PATCH 10/21] libata: improve EH report formatting,
Tejun Heo
- [PATCH 11/21] libata: implement AC_ERR_NCQ,
Tejun Heo
- [PATCH 06/21] ahci: separate out ahci_do_softreset(),
Tejun Heo
- [PATCH 12/21] libata: make ->scr_read/write callbacks return error code,
Tejun Heo
- [PATCH 13/21] ahci: make NO_NCQ handling more consistent,
Tejun Heo
- [PATCH 16/21] libata: quickly trigger SATA SPD down after debouncing failed,
Tejun Heo
- [PATCH 14/21] ahci: implement SCR_NOTIFICATION r/w,
Tejun Heo
- [PATCH 07/21] sata_sil24: replace sil24_update_tf() with sil24_read_tf(),
Tejun Heo
- [PATCH 15/21] libata: improve SATA PHY speed down logic,
Tejun Heo
- [PATCH 18/21] libata: reorganize ata_ehi_hotplugged(),
Tejun Heo
- [PATCH 17/21] libata: improve SCSI scan failure handling,
Tejun Heo
- [PATCH 21/21] libata: implement EH fast drain,
Tejun Heo
- [PATCH 19/21] libata: clear HOTPLUG flag after a reset,
Tejun Heo
- [PATCH 20/21] libata: schedule probing after SError access failure during autopsy,
Tejun Heo
- [patch] Add more device IDs for supporting ATI SB700,
su henry
- sata_inic162x issue - PCMCIA card,
jm_928
- [PATCH 0/3] libata: add taskfile protocol ->proto_mask info member,
Jeff Garzik
- [PATCH] cs5520: don't enable VDMA in ->speedproc,
Bartlomiej Zolnierkiewicz
- [PATCH] siimage: fix ->set_pio_mode method to select PIO data transfer,
Bartlomiej Zolnierkiewicz
- [PATCH] sc1200: remove redundant warning message from sc1200_tune_chipset(),
Bartlomiej Zolnierkiewicz
- [PATCH] piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2),
Bartlomiej Zolnierkiewicz
- [PATCH] it8213: PIO fixes (take 2),
Bartlomiej Zolnierkiewicz
- AHCI driver prints "D2H reg with I during NCQ" message, what is it?,
Chuck Ebbert
- shutdown problem with 2.6.22 and debian 4.0,
Daniel Filipiuk
- [PATCH] Unbreak build of PMP with ACPI disabled,
Petr Vandrovec
- Spinup command fails on WD3200JS,
Ryan Power
- =?utf-7?b?K0FGcy1wYXRjaCtBRjAtIEFkZCBtb3JlIGRldmljZSBJRHMgZm9yIA==?==?utf-7?b?c3VwcG9ydGluZyBBVEkgU0I3MDAgU0FUQSBjb250cm8=?==?utf-7?b?bGxlciBjb21wbGV0ZWx5IA==?=,
Henry Su
- Sata_Sil24: how to disable hotplug,
Fajun Chen
- 40-wire/80-wire detection,
Craig Block
- ipr using libata old-EH,
Jeff Garzik
- trouble with silicon image 680,
perazim
- [PATCH] libata: add another Maxtor drive with broken NCQ to the list,
Chuck Ebbert
- [2.6.20.15] CK804 / sata_nv: Reported link speed not as expected.,
koan
- Re: REQUEST_SENSE and ide-cd.c,
Chuck Ebbert
- Libata Port Multiplier,
Richard Stephens
- [RFT][PATCH v7] sata_mv: convert to new EH,
Jeff Garzik
- sata_promise TX4 "intermittent problems" still in 2.6.22,
Peter Favrholdt
- [PATCH] Native-mode fix for Pegasos pata_via,
Matt Sealey
- [RFT][PATCH v6] sata_mv: convert to new EH,
Jeff Garzik
- [PATCH] pata_hpt3x3: DMA Kconfig fix,
Jeff Garzik
- [PATCH 6/6] ide: config_drive_for_dma() fixes,
Bartlomiej Zolnierkiewicz
- [PATCH 5/6] sgiioc4: use ide_tune_dma(),
Bartlomiej Zolnierkiewicz
- [PATCH 4/6] amd74xx/via82cxxx: use ide_tune_dma(),
Bartlomiej Zolnierkiewicz
- [PATCH 3/6] ide-pmac: PIO fixes,
Bartlomiej Zolnierkiewicz
- [PATCH 1/6] icside: fix ->speedproc to return on unsupported modes,
Bartlomiej Zolnierkiewicz
- [PATCH 2/6] ide-cris: fix ->set_pio_mode method to set transfer mode on the device,
Bartlomiej Zolnierkiewicz
- [PATCH]: Add Hitachi HDS7250SASUN500G 0621KTAWSD to NCQ blacklist,
Prarit Bhargava
- Re: [PATCH] PCMCIA: Add another MemoryCard to ide-cd/pata_pcmcia,
Bartlomiej Zolnierkiewicz
- Re: [PATCH] scc_pata.c: Workaround for errata A308,
Bartlomiej Zolnierkiewicz
- ata and netdev (was Re: -mm merge plans for 2.6.23),
Jeff Garzik
- Freeze after disabling write cache with hdparm -W0 /dev/sda,
Simon Farnsworth
- [PATCH] pata_scc.c: Workaround for errata A308,
Akira Iguchi
- [PATCH] scc_pata.c: Workaround for errata A308,
Akira Iguchi
- ICH4 support in ata_piix?,
Koen Vermeer
- [PATCH 2.6.22/-stable] libata: add FUJITSU MHV2080BH to NCQ blacklist,
Tejun Heo
- [PATCH 1/2] PCI: export __pci_reenable_device(),
Tejun Heo
- [PATCH] ide: Use inline function for eieio,
Kumar Gala
- [PATCH,RFC] Add configuration for availability of pata_platform,
Ben Dooks
- Re: [PATCH 1/1] libata: pata_pdc2027x PLL input clock fix,
Mikael Pettersson
- Problem with SiS Ide/Pata/Sata on 2.6.22-rc7-git4,
Thomas Backlund
- [patch 09/11] pata_hpt3x3: major reworking and testing,
akpm
- [patch 10/11] iomap: sort out the broken address reporting caused by the iomap layer,
akpm
- [patch 11/11] ata: use iomap_name(),
akpm
- [patch 08/11] sata_nv: allow changing queue depth,
akpm
- [PATCH] libata: sata_mv: print out additional chip info during probe,
Jeff Garzik
- [PATCH] libata: Use ATA_UDMAx standard masks when filling driver's udma_mask info,
Jeff Garzik
- [PATCH] libata: AHCI: Add support for Marvell AHCI-like chips (initially 6145),
Jeff Garzik
- [PATCH] libata: Clean up driver udma_mask initializers,
Jeff Garzik
- [patch 07/11] ata: add the SW NCQ support to sata_nv for MCP51/MCP55/MCP61,
akpm
- [patch 05/11] sata_promise: SATA hotplug support,
akpm
- [patch 06/11] libata-add-irq_flags-to-struct-pata_platform_info-fix,
akpm
- [patch 04/11] libata: implement ata_wait_after_reset(),
akpm
- [patch 02/11] pata_acpi: restore driver,
akpm
- [patch 03/11] libata-core: convert to use cancel_rearming_delayed_work(),
akpm
- [patch 01/11] libata: CONFIG_PM=n compile fix,
akpm
- Question about PATA Sil680 Bus Reset Code,
Fajun Chen
- [RFT][PATCH 1/2] sata_mv: post-2.6.22 cleanups,
Jeff Garzik
- CHRP PCI fixup for Pegasos IDE (looking for testers),
Matt Sealey
- [PATCH] sata_mv: Test patch for Hightpoint RocketRaid 1740/1742,
Alan Cox
- Re: [BUG] IT8212 libata driver *still* hard-freezes system on boot on 2.6.22 final.,
Rodney Gordon II
- Re: [BUG] IT8212 libata driver *still* hard-freezes system on boot on 2.6.22 final.,
Tejun Heo
- [PATCH 8/12] scc_pata: PIO fixes,
Bartlomiej Zolnierkiewicz
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
