* Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature().
While at it do following changes to match __ide_wait_stat() call in
ide_config_drive_speed():
* Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT.
* Check DRQ_STAT bit (shouldn't be set for good device status).
Also remove no longer needed wait_for_ready() from ide-iops.c.
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ide-iops.c | 31 +------------------------------
drivers/ide/ppc/pmac.c | 9 +++++----
include/linux/ide.h | 2 +-
3 files changed, 7 insertions(+), 35 deletions(-)
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -473,35 +473,6 @@ int drive_is_ready (ide_drive_t *drive)
EXPORT_SYMBOL(drive_is_ready);
/*
- * Global for All, and taken from ide-pmac.c. Can be called
- * with spinlock held & IRQs disabled, so don't schedule !
- */
-int wait_for_ready (ide_drive_t *drive, int timeout)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 stat = 0;
-
- while(--timeout) {
- stat = hwif->INB(IDE_STATUS_REG);
- if (!(stat & BUSY_STAT)) {
- if (drive->ready_stat == 0)
- break;
- else if ((stat & drive->ready_stat)||(stat & ERR_STAT))
- break;
- }
- mdelay(1);
- }
- if ((stat & ERR_STAT) || timeout <= 0) {
- if (stat & ERR_STAT) {
- printk(KERN_ERR "%s: wait_for_ready, "
- "error status: %x\n", drive->name, stat);
- }
- return 1;
- }
- return 0;
-}
-
-/*
* This routine busy-waits for the drive status to be not "busy".
* It then checks the status for all of the "good" bits and none
* of the "bad" bits, and if all is okay it returns 0. All other
@@ -512,7 +483,7 @@ int wait_for_ready (ide_drive_t *drive,
* setting a timer to wake up at half second intervals thereafter,
* until timeout is achieved, before timing out.
*/
-static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
+int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
{
ide_hwif_t *hwif = drive->hwif;
unsigned long flags;
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -540,7 +540,8 @@ static int
pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
{
ide_hwif_t *hwif = HWIF(drive);
- int result = 1;
+ int result;
+ u8 stat;
disable_irq_nosync(hwif->irq);
udelay(1);
@@ -551,9 +552,9 @@ pmac_ide_do_setfeature(ide_drive_t *driv
hwif->OUTB(command, IDE_NSECTOR_REG);
hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
- udelay(1);
- /* Timeout bumped for some powerbooks */
- result = wait_for_ready(drive, 2000);
+ result = __ide_wait_stat(drive, drive->ready_stat,
+ BUSY_STAT|DRQ_STAT|ERR_STAT,
+ WAIT_CMD, &stat);
hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
if (result)
printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1152,7 +1152,7 @@ extern void SELECT_MASK(ide_drive_t *, i
extern void QUIRK_LIST(ide_drive_t *);
extern int drive_is_ready(ide_drive_t *);
-extern int wait_for_ready(ide_drive_t *, int /* timeout */);
+int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long);
/*
* taskfile io for disks for now...and builds request from ide_ioctl
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
