Re: [PATCH 2/4] it8213/piix/slc90e66: don't change DMA settings when programming PIO

[Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>]

Bartlomiej Zolnierkiewicz wrote:

> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>

Acked-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>

> Index: b/drivers/ide/pci/it8213.c
> ===================================================================
> --- a/drivers/ide/pci/it8213.c
> +++ b/drivers/ide/pci/it8213.c
> @@ -134,6 +134,11 @@ static int it8213_tune_chipset(ide_drive
>  	u16			reg4042, reg4a;
>  	u8			reg48, reg54, reg55;
>  
> +	if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
> +		it8213_tune_pio(drive, speed - XFER_PIO_0);
> +		return ide_config_drive_speed(drive, speed);
> +	}
> +
>  	pci_read_config_word(dev, maslave, &reg4042);
>  	pci_read_config_byte(dev, 0x48, &reg48);
>  	pci_read_config_word(dev, 0x4a, &reg4a);
> @@ -153,12 +158,6 @@ static int it8213_tune_chipset(ide_drive
>  		case XFER_MW_DMA_1:
>  		case XFER_SW_DMA_2:
>  			break;
> -		case XFER_PIO_4:
> -		case XFER_PIO_3:
> -		case XFER_PIO_2:
> -		case XFER_PIO_1:
> -		case XFER_PIO_0:
> -			break;

   Erm, why nmot just change this part, i.e. call it8213_tune_pio() and
ide_config_drive_speed() here? Would have been simpler...

>  		default:
>  			return -1;
>  	}
> @@ -190,10 +189,7 @@ static int it8213_tune_chipset(ide_drive
>  			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
>  	}
>  
> -	if (speed > XFER_PIO_4)
> -		it8213_tune_pio(drive, it8213_dma_2_pio(speed));
> -	else
> -		it8213_tune_pio(drive, speed - XFER_PIO_0);
> +	it8213_tune_pio(drive, it8213_dma_2_pio(speed));
>  
>  	return ide_config_drive_speed(drive, speed);
>  }
[...]

   The same comment for 2 other drivers...

MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html