Run smart tests yet?
1. smartctl -d ata -t short /dev/sda
2. smartctl -d ata -a /dev/sda (after few min)
also replace short with long
and then paste the output:
smartctl -d ata -a /dev/sda
There have been lots of reports on newegg concerning the HD501 DOA after
several hours.
Justin.
On Sat, 30 Jun 2007, Daniel Schroeder wrote:
hello list,
i do not know, what this could mean, but i have never seen it before.
System is 2.6.22-rc6, sil3132, samsung hd501lj (new hd under 10 power on
hours)
time line:
1: power on (single esata enclosure)
2: system recognizes and configures the disk
3: mount disk
4: use disk
5: device error via SDB FIS
6: mount is still there, everything looks good except of this entry in logs
<quote>
ata3: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0x2 frozen
ata3: (irq_stat 0x01140010, PHY RDY changed)
ata3: soft resetting port
ata3: SATA link down (SStatus 0 SControl 300)
ata3: EH complete
ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3: (irq_stat 0x00b00090, PHY RDY changed)
ata3: soft resetting port
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
ata3.00: configured for UDMA/100
ata3: EH complete
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ata3.00: exception Emask 0x0 SAct 0x2ef SErr 0x0 action 0x0
ata3.00: (irq_stat 0x00020002, device error via SDB FIS)
ata3.00: cmd 61/28:30:17:83:68/00:00:1f:00:00/40 tag 6 cdb 0x0 data 20480 out
res 51/04:30:17:83:68/50:04:1f:00:00/40 Emask 0x1 (device error)
ata3.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
ata3.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
ata3.00: configured for UDMA/100
ata3: EH complete
sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
</quote>
daniel
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
