Linux IDE Archive

• Thread Index

• Re: [patch 25/30] pata_hpt3x3: clean up by using cable method
  • From: Alan Cox
• Re: [patch 04/30] ACPI driver support for pata
  • From: Tejun Heo
• Re: [patch 05/30] pcmcia - spot slave decode flaws (for testing)
  • From: Alan Cox
• Re: [patch 04/30] ACPI driver support for pata
  • From: Alan Cox
• Hotswap problem on vt8251 with ahci driver
  • From: Aalderd Bouwman
• Re: [patch 26/30] Support for Marvell 7042 Chip
  • From: Jeff Garzik
• Re: [patch 04/30] ACPI driver support for pata
  • From: Tejun Heo
• RE: [patch 26/30] Support for Marvell 7042 Chip
  • From: Morrison, Tom
• Re: [patch 27/30] pata_cmd640: CMD640 PCI support
  • From: Jeff Garzik
• Re: [patch 26/30] Support for Marvell 7042 Chip
  • From: Jeff Garzik
• Re: [patch 25/30] pata_hpt3x3: clean up by using cable method
  • From: Jeff Garzik
• Re: [patch 08/30] libata: cable detection fixes
  • From: Jeff Garzik
• Re: [patch 06/30] libata: handle ata_pci_device_do_resume() failure while resuming
  • From: Jeff Garzik
• Re: [patch 02/30] libata: warn if speed limited due to 40-wire cable
  • From: Jeff Garzik
• Re: [patch 28/30] libata Kconfig: Update the various experimentality levels
  • From: Jeff Garzik
• Re: [patch 07/30] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Jeff Garzik
• Re: [patch 05/30] pcmcia - spot slave decode flaws (for testing)
  • From: Jeff Garzik
• [patch 04/30] ACPI driver support for pata
  • From: akpm
• [patch 06/30] libata: handle ata_pci_device_do_resume() failure while resuming
  • From: akpm
• [patch 27/30] pata_cmd640: CMD640 PCI support
  • From: akpm
• [patch 25/30] pata_hpt3x3: clean up by using cable method
  • From: akpm
• [patch 28/30] libata Kconfig: Update the various experimentality levels
  • From: akpm
• [patch 30/30] pata_pdc202xx_old: fix data corruption and other problems
  • From: akpm
• [patch 12/30] ata_generic: Remove lots of code using the new cable_detect method
  • From: akpm
• [patch 11/30] pata_sl82c105: Missing methods, cable
  • From: akpm
• [patch 13/30] pata_ali: remove lots of code by using the cable_detect method
  • From: akpm
• [patch 22/30] pata_rz1000: remove lots of crap by using cable method
  • From: akpm
• [patch 08/30] libata: cable detection fixes
  • From: akpm
• [patch 18/30] pata_legacy: Fix missing methods and add cable types
  • From: akpm
• [patch 23/30] pata_winbond: set cable type
  • From: akpm
• [patch 16/30] pata_isapnp: set cable type
  • From: akpm
• [patch 14/30] pata_cs55x0: clean up by using the cable_detect method
  • From: akpm
• [patch 21/30] pata_sc1200: set cable type, add freeze/thaw methods
  • From: akpm
• [patch 15/30] pata_cypress: clean up by using cable_detect method
  • From: akpm
• [patch 20/30] pata_radisys - switch to cable method to cleanup code, correct cable type
  • From: akpm
• [patch 29/30] sata_nv: don't read shadow registers when in ADMA mode
  • From: akpm
• [patch 26/30] Support for Marvell 7042 Chip
  • From: akpm
• [patch 19/30] pata_netcell: remove lots of crud by using the cable method
  • From: akpm
• [patch 24/30] pata_cmd64x - various fixes
  • From: akpm
• [patch 17/30] pata_ixp4xx_cf - set cable type
  • From: akpm
• [patch 09/30] pata_platform: set a cable type (which to set ?)
  • From: akpm
• [patch 10/30] pata_qdi: set cable type
  • From: akpm
• [patch 05/30] pcmcia - spot slave decode flaws (for testing)
  • From: akpm
• [patch 03/30] pata: expose set_mode method so it can be wrapped
  • From: akpm
• [patch 07/30] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: akpm
• [patch 02/30] libata: warn if speed limited due to 40-wire cable
  • From: akpm
• [patch 01/30] sata_nv: add back some verbosity into ADMA error_handler
  • From: akpm
• Re: [PATCH 1/3] libata: add missing PM callbacks
  • From: Andrew Grover
• Re: [PATA] Failed to set xfermode on LITE-ON LTR-48246S
  • From: Philipp Matthias Hahn
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 2.6.21-rc2] ahci: RAID mode SATA patch for Intel ICH9M
  • From: Jeff Garzik
• Re: [PATCH 2.6.21-rc2] pata_legacy: fix io/irq mismatch
  • From: Jeff Garzik
• Re: [PATCH][libata] pata_pdc202xx_old: fix data corruption and other problems
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: add missing PM callbacks
  • From: Pavel Machek
• Re: [PATCH 1/3] libata: add missing PM callbacks
  • From: Tejun Heo
• Re: [PATCH 1/3] libata: add missing PM callbacks
  • From: Pavel Machek
• RE: [git patches] libata fixes
  • From: Paul Rolland
• Re: [PATCH, RFT, v2] sata_mv: convert to new EH
  • From: dean gaudet
• Re: [PATCH, RFT, v2] sata_mv: convert to new EH
  • From: Dave Dillow
• Re: [PATCH, RFT, v2] sata_mv: convert to new EH
  • From: Jeff Garzik
• Re: [PATCH, RFT, v2] sata_mv: convert to new EH
  • From: Jeff Garzik
• Re: [PATCH, RFT, v2] sata_mv: convert to new EH
  • From: Dave Dillow
• [PATCH] sata_nv: don't read shadow registers when in ADMA mode
  • From: Robert Hancock
• OOPS with 2.6.21rc2-git (ata: conflict with ide0/1)
  • From: Kok, Auke
• Re: [PATCH][pata-2.6 tree] pdc202xx_old: rewrite mode programming code
  • From: Bartlomiej Zolnierkiewicz
• Re: nonzero mismatch_cnt with no earlier error
  • From: Eyal Lebedinsky
• Re: Regression between 2.6.20 and 2.6.21-rc1: NCQ problem with ahci and Hitachi drive
  • From: Mathieu Bérard
• Re: [PATCH][pata-2.6 tree] pdc202xx_old: rewrite mode programming code
  • From: Sergei Shtylyov
• Re: [PATCH][pata-2.6 tree] pdc202xx_old: rewrite mode programming code
  • From: Sergei Shtylyov
• Re: [PATCH][pata-2.6 tree] pdc202xx_old: rewrite mode programming code
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH][pata-2.6 tree] pdc202xx_old: rewrite mode programming code
  • From: Sergei Shtylyov
• Re: nonzero mismatch_cnt with no earlier error
  • From: Tejun Heo
• Re: [PATA] Failed to set xfermode on LITE-ON LTR-48246S
  • From: Tejun Heo
• Re: [git patches] libata fixes
  • From: Tejun Heo
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Bill Davidsen
• Re: sata_sil problems with recent kernels
  • From: Patrick Ale
• Re: [PATA] Failed to set xfermode on LITE-ON LTR-48246S
  • From: Philipp Matthias Hahn
• RE: [git patches] libata fixes
  • From: Paul Rolland
• RE: [git patches] libata fixes
  • From: Paul Rolland
• Re: nonzero mismatch_cnt with no earlier error
  • From: Eyal Lebedinsky
• Re: [git patches] libata fixes
  • From: Tejun Heo
• Re: [git patches] libata fixes
  • From: Tejun Heo
• Re: sata_nv: "abnormal status 0x7F on port 0xE407"
  • From: Tejun Heo
• Re: How to Change SATA Speed from User Space
  • From: Tejun Heo
• Re: [RFT] sata_promise: decode and report error reasons
  • From: Tejun Heo
• Re: nonzero mismatch_cnt with no earlier error
  • From: Tejun Heo
• Re: sata_sil problems with recent kernels
  • From: Tejun Heo
• Re: [PATA] Failed to set xfermode on LITE-ON LTR-48246S
  • From: Tejun Heo
• Re: [3/6] 2.6.21-rc2: known regressions
  • From: Michal Jaegermann
• Re: [PATCH/RFC]: recovery from power-up-in-standby feature
  • From: Mark Lord
• Re: [RFT] libata hpa support
  • From: Tejun Heo
• [PATCH/RFC] implement __attribute_discard_text/data__ and use it to leave out PM functions if !CONFIG_PM
  • From: Tejun Heo
• Re: Regression between 2.6.20 and 2.6.21-rc1: NCQ problem with ahci and Hitachi drive
  • From: Tejun Heo
• [3/6] 2.6.21-rc2: known regressions
  • From: Adrian Bunk
• Regression between 2.6.20 and 2.6.21-rc1: NCQ problem with ahci and Hitachi drive
  • From: Mathieu Bérard
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Stephen Clark
• Re: CK804 SATA Errors (still got them)
  • From: Jeff Garzik
• Re: [PATCH/RFC]: recovery from power-up-in-standby feature
  • From: Jeff Garzik
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Bill Davidsen
• Re: [PATCH/RFC]: recovery from power-up-in-standby feature
  • From: Mark Lord
• Re: [PATCH/RFC]: recovery from power-up-in-standby feature
  • From: Alan Cox
• [PATCH] sis5513: PIO mode setup fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] serverworks: PIO mode setup fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH][libata] pata_pdc202xx_old: fix data corruption and other problems
  • From: Alan Cox
• [PATCH/RFC]: recovery from power-up-in-standby feature
  • From: Mark Lord
• [PATCH] libata: (round 6) add support for ATA_16 on ATAPI
  • From: Mark Lord
• Re: [PATCH] libata: (round 5) add support for ATA_16 on ATAPI
  • From: Mark Lord
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Stephen Clark
• Re: [PATCH][libata] pata_pdc202xx_old: fix data corruption and other problems
  • From: Bartlomiej Zolnierkiewicz
• [BUG] pata_legacy reserves too many io/irq resources
  • From: Mikael Pettersson
• [PATCH][libata] pata_pdc202xx_old: fix data corruption and other problems
  • From: Bartlomiej Zolnierkiewicz
• [PATCH][pata-2.6 tree] pdc202xx_old: rewrite mode programming code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2.6.21-rc2-git3] ata: fix pata_jmicron compile failure
  • From: Adam J. Richter
• Re: [PATCH 2.6.21-rc2] pata_legacy: fix io/irq mismatch
  • From: Alan Cox
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Bill Davidsen
• [PATCH pata-2.6 fix queue] cmd64x: fix recovery time calculation (take 3)
  • From: Sergei Shtylyov
• [PATCH 2.6.21-rc2] pata_legacy: fix io/irq mismatch
  • From: Mikael Pettersson
• Re: [PATCH] pata_cmd640: CMD640 PCI support
  • From: Sergei Shtylyov
• RE: [PATCH] libata: Cable detection fixes
  • From: Paul Rolland
• RE: [git patches] libata fixes
  • From: Paul Rolland
• Re: [PATCH] pata_cmd640: CMD640 PCI support
  • From: Alan Cox
• RE: [git patches] libata fixes
  • From: Paul Rolland
• RE: [git patches] libata fixes
  • From: Paul Rolland
• Re: [PATCH 2.6.21-rc2] pmac ide: fix pmac_ide_dma_host_on() declaration
  • From: Sergei Shtylyov
• sata_nv: "abnormal status 0x7F on port 0xE407"
  • From: Dâniel Fraga
• [git patches] IDE updates
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata_cmd640: CMD640 PCI support
  • From: Sergei Shtylyov
• [git patch] libata build fix
  • From: Jeff Garzik
• [PATCH 2.6.21-rc2] pmac ide: fix pmac_ide_dma_host_on() declaration
  • From: Mikael Pettersson
• Re: [linux-pm] [PATCH 2/2 -stable] libata: add missing CONFIG_PM in LLDs
  • From: Nigel Cunningham
• Re: [linux-pm] [PATCH 2/2 -stable] libata: add missing CONFIG_PM in LLDs
  • From: Tejun Heo
• Re: [PATCH 1/3] libata: add missing PM callbacks
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• [PATCH 2.6.21-rc2] ahci: RAID mode SATA patch for Intel ICH9M
  • From: Jason Gaston
• Re: [PATCH 2.6.20] libata: Support HDIO_DRIVE_TASKFILE ioctl
  • From: Jeff Garzik
• Re: [PATCH] libata: (round 5) add support for ATA_16 on ATAPI
  • From: Jeff Garzik
• Re: [PATCH] RESEND: libata: check cdb len per dev instead of per host
  • From: Jeff Garzik
• Re: [linux-pm] [PATCH 2/2 -stable] libata: add missing CONFIG_PM in LLDs
  • From: Nigel Cunningham
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Jeff Garzik
• Re: [PATCH] libata Kconfig: Update the various experimentality levels
  • From: Jeff Garzik
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Alan Cox
• Re: [PATCH] pata_cmd640: CMD640 PCI support
  • From: Alan Cox
• Re: [PATCH] libata: fix SCSI/ATA device association during hotplug, take 2
  • From: Jeff Garzik
• Re: [PATCH] libata: implement and use ata_wait_idle_quiet()
  • From: Alan Cox
• Re: [PATCH 4/4] libata: improve media error handling
  • From: Jeff Garzik
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: add missing PM callbacks
  • From: Jeff Garzik
• Re: [PATCH] pata_cmd640: CMD640 PCI support
  • From: Jeff Garzik
• Re: [PATCH] pata_qdi: Fix initialisation
  • From: Jeff Garzik
• Re: [PATCH] pata_cmd64x - various fixes
  • From: Jeff Garzik
• Re: [PATCH] libata: dev_config does not need ap and adev passing
  • From: Jeff Garzik
• Re: [PATCH] pata_legacy: Fix missing methods and add cable types
  • From: Jeff Garzik
• Re: [PATCH] libata: implement and use ata_wait_idle_quiet()
  • From: Jeff Garzik
• Re: [PATCH] libata: Cable detection fixes
  • From: Jeff Garzik
• Re: [PATCH] libata: Cable detection fixes
  • From: Jeff Garzik
• Re: [PATCH] libata-core: Fix simplex handling
  • From: Jeff Garzik
• Re: [PATCH 1/2 -stable] libata: add missing PM callbacks
  • From: Guennadi Liakhovetski
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: fix recovery time calculation (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: add back MWDMA support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata Kconfig: Update the various experimentality levels
  • From: Alan Cox
• How to Change SATA Speed from User Space
  • From: Fajun Chen
• Re: [PATCH] libata Kconfig: Update the various experimentality levels
  • From: Alistair John Strachan
• [PATCH] libata Kconfig: Update the various experimentality levels
  • From: Alan Cox
• [PATCH] pata_cmd640: CMD640 PCI support
  • From: Alan Cox
• [PATCH] pata_qdi: Fix initialisation
  • From: Alan Cox
• Re: [RFT] sata_promise: intermittent errors bug hunting
  • From: Mikael Pettersson
• Re: [PATCH 2/3] libata: add missing CONFIG_PM in LLDs
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: add missing CONFIG_PM in LLDs
  • From: Alan Cox
• Re: [PATCH 2/3] libata: add missing CONFIG_PM in LLDs
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: add missing CONFIG_PM in LLDs
  • From: Alan Cox
• Re: [PATCH 1/3] libata: add missing PM callbacks
  • From: Alan Cox
• Re: [RFT] sata_promise: intermittent errors bug hunting
  • From: Tomi Orava
• Re: [PATCH] libata: Cable detection fixes
  • From: Alan Cox
• Re: [PATCH] libata: Cable detection fixes
  • From: Alan Cox
• [PATCH 2/2 -stable] libata: add missing CONFIG_PM in LLDs
  • From: Tejun Heo
• [PATCH 1/2 -stable] libata: add missing PM callbacks
  • From: Tejun Heo
• [PATCH 3/3] libata: add CONFIG_PM to libata core layer
  • From: Tejun Heo
• [PATCH 2/3] libata: add missing CONFIG_PM in LLDs
  • From: Tejun Heo
• [PATCH 1/3] libata: add missing PM callbacks
  • From: Tejun Heo
• Re: [PATCH] libata: Cable detection fixes
  • From: Michal Jaegermann
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] libata: Cable detection fixes
  • From: Jeff Garzik
• Re: [PATCH, RFT, v2] sata_mv: convert to new EH
  • From: Andre Tomt
• Re: [PATCH] libata: Cable detection fixes
  • From: Jeff Garzik
• Re: [PATCH] libata: Cable detection fixes
  • From: Linus Torvalds
• Re: [PATCH] ahci: improve spurious SDB FIS handling
  • From: Jeff Garzik
• Re: [PATCH 1/3] pata_jmicron: drop unnecessary device programming in [re]init
  • From: Jeff Garzik
• Re: [PATCH] libata: blacklist FUJITSU MHT2060BH for NCQ
  • From: Jeff Garzik
• Re: [PATCH] libata: clear drvdata in ata_host_release(), take#2
  • From: Jeff Garzik
• Re: [PATCH] sata_sil24: kill unused local variable idx in sil24_fill_sg()
  • From: Jeff Garzik
• Re: [PATCH, RFT, v2] sata_mv: convert to new EH
  • From: Jeff Garzik
• [PATCH] libata: dev_config does not need ap and adev passing
  • From: Alan
• Re: [PATCH] pata_sil680 suspend/resume
  • From: Guennadi Liakhovetski
• [PATCH] pata_sl82c105: Missing methods, cable
  • From: Alan
• Re: end to end error recovery musings
  • From: H. Peter Anvin
• [PATCH] pata_qdi: set cable type
  • From: Alan
• [PATCH] pata_platform: set a cable type (which to set ?)
  • From: Alan
• [PATCH] pata_hpt3x3: clean up by using cable method
  • From: Alan
• [PATCH] pata_cmd64x - various fixes
  • From: Alan
• [PATCH] pata_winbond: set cable type
  • From: Alan
• [PATCH] pata_sc1200: set cable type, add freeze/thaw methods
  • From: Alan
• [PATCH] pata_rz1000: remove lots of crap by using cable method
  • From: Alan
• [PATCH] pata_radisys - switch to cable method to cleanup code, correct cable type
  • From: Alan
• [PATCH] pata_netcell: remove lots of crud by using the cable method
  • From: Alan
• [PATCH] pata_legacy: Fix missing methods and add cable types
  • From: Alan
• [PATCH] pata_ixp4xx_cf - set cable type
  • From: Alan
• [PATCH] pata_isapnp: set cable type
  • From: Alan
• [PATCH] pata_cypress: clean up by using cable_detect method
  • From: Alan
• libata: 30sec delay during boot with cdrom attached
  • From: Gregor Jasny
• [PATCH] pata_cs55x0: clean up by using the cable_detect method
  • From: Alan
• [PATCH] pata_ali: remove lots of code by using the cable_detect method
  • From: Alan
• [PATCH] ata_generic: Remove lots of code using the new cable_detect method
  • From: Alan
• [PATCH] libata-core: Fix simplex handling
  • From: Alan
• [PATCH] libata: Cable detection fixes
  • From: Alan
• Re: end to end error recovery musings
  • From: James Bottomley
• Re: SATA Problem: port is slow to respond
  • From: Sigmund Scheinbar
• Re: SATA Problem: port is slow to respond
  • From: Tejun Heo
• Adaptec 1220SA (Sil3132) & sata_sil24 question
  • From: James Clark
• Marvell 6145 SATA via AHCI
  • From: George T. Joseph (development)
• [RFT] sata_promise: decode and report error reasons
  • From: Mikael Pettersson
• Re: [ignore] am I still subscribed?
  • From: Mark Lord
• Re: end to end error recovery musings
  • From: H. Peter Anvin
• [ignore] am I still subscribed?
  • From: Mark Lord
• Re: sata_sil problems with recent kernels
  • From: Dale Blount
• Re: [RFT] sata_promise: intermittent errors bug hunting
  • From: Andreas Arens
• [PATCH] (pata-2.6 fix queue) cmd64x: add back MWDMA support
  • From: Sergei Shtylyov
• Re: end to end error recovery musings
  • From: James Bottomley
• Re: end to end error recovery musings
  • From: Martin K. Petersen
• Re: end to end error recovery musings
  • From: James Bottomley
• Re: end to end error recovery musings
  • From: Martin K. Petersen
• [PATCH]Support for Marvell 7042 Chip
  • From: Morrison, Tom
• RE: end to end error recovery musings
  • From: Moore, Eric
• Re: Current PATA working tree
  • From: Chuck Ebbert
• Re: end to end error recovery musings
  • From: Douglas Gilbert
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: fix primary channel address setup time
  • From: Sergei Shtylyov
• pata_pcmcia takes long time to detect certain cf cards
  • From: Manuel Lauss
• Re: [PATCH 2.6.21-rc1] sata_vsc: refactor vsc_sata_interrupt and hook up error handling
  • From: Jeremy Higdon
• [PATCH] libata: blacklist FUJITSU MHT2060BH for NCQ
  • From: Tejun Heo
• Re: SATA Problem: port is slow to respond
  • From: Tejun Heo
• Re: Silicon Image 3124 problems with Norco DS-1220 (Sil3726 port multipliers?)
  • From: Jim Paris
• Fwd: Re: Silicon Image 3124 problems with Norco DS-1220 (Sil3726 port multipliers?)
  • From: Marc Bejarano
• Re: [RFT] sata_promise: intermittent errors bug hunting
  • From: Jeff Garzik
• Re: end to end error recovery musings
  • From: Martin K. Petersen
• Re: end to end error recovery musings
  • From: Alan
• [RFT] sata_promise: intermittent errors bug hunting
  • From: Mikael Pettersson
• [PATCH] (pata-2.6 fix queue) cmd64x: fix primary channel address setup time
  • From: Sergei Shtylyov
• Re: SATA Problem: port is slow to respond
  • From: Sigmund Scheinbar
• sata_sx4 driver
  • From: Thomas Kraemmer
• Re: ICH6-M libata disk timeouts 2.6.18 -> 2.6.19
  • From: Mike Accetta
• Re: sata_sil problems with recent kernels
  • From: Dale Blount
• Re: end to end error recovery musings
  • From: Martin K. Petersen
• Re: end to end error recovery musings
  • From: Ric Wheeler
• Re: end to end error recovery musings
  • From: Andreas Dilger
• Re: end to end error recovery musings
  • From: Alan
• Re: Bug? ahci.c
  • From: James Ray
• Re: end to end error recovery musings
  • From: Martin K. Petersen
• Re: Bug? ahci.c
  • From: Tejun Heo
• Re: Bug? ahci.c
  • From: Tejun Heo
• Re: libata Intel PIIX/ICH fails to detect both PATA drives, spews ACPI errors
  • From: Tejun Heo
• Re: ICH6-M libata disk timeouts 2.6.18 -> 2.6.19
  • From: Tejun Heo
• Re: SATA Problem: port is slow to respond
  • From: Tejun Heo
• Re: [PATA] Failed to set xfermode on LITE-ON LTR-48246S
  • From: Philipp Matthias Hahn
• [PATCH] libata: implement and use ata_wait_idle_quiet()
  • From: Tejun Heo
• [PATCH] libata: clear drvdata in ata_host_release(), take#2
  • From: Tejun Heo
• Re: 2.6.21-rc1: known regressions (v2) (part 1)
  • From: Meelis Roos
• Re: 2.6.21-rc1: known regressions (v2) (part 1)
  • From: Alan
• Re: really bad performance with ICH7 SATA controller
  • From: Baeckham
• Re: really bad performance with ICH7 SATA controller
  • From: Alan
• really bad performance with ICH7 SATA controller
  • From: Baeckham
• Silicon Image 3124 problems with Norco DS-1220 (Sil3726 port multipliers?)
  • From: Gregory Youngblood
• [PATCH] ahci: improve spurious SDB FIS handling
  • From: Tejun Heo
• RE: end to end error recovery musings
  • From: Moore, Eric
• Re: end to end error recovery musings
  • From: Alan
• Re: sata_nv: cleanup CPB and APRD initialization
  • From: Jeff Garzik
• Re: end to end error recovery musings
  • From: Ric Wheeler
• Re: end to end error recovery musings
  • From: Jeff Garzik
• 2.6.21-rc1: known regressions (v2) (part 1)
  • From: Adrian Bunk
• Current PATA working tree
  • From: Alan
• [PATCH] (pata-2.6 fix queue) cmd64x: fix recovery time calculation (take 2)
  • From: Sergei Shtylyov
• Re: end to end error recovery musings
  • From: H. Peter Anvin
• Re: [git patches] more IDE updates
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patches] more IDE updates
  • From: Sergei Shtylyov
• Re: end to end error recovery musings
  • From: Ric Wheeler
• Re: [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection
  • From: Alan
• Re: end to end error recovery musings
  • From: Alan
• Re: end to end error recovery musings
  • From: Ric Wheeler
• Re: end to end error recovery musings
  • From: James Bottomley
• Re: end to end error recovery musings
  • From: Alan
• Re: end to end error recovery musings
  • From: Theodore Tso
• [PATCH 3/3] ahci/pata_jmicron: match class not function number
  • From: Tejun Heo
• [PATCH 2/3] jmicron ATA: reimplement jmicron ATA quirk
  • From: Tejun Heo
• [PATCH 1/3] pata_jmicron: drop unnecessary device programming in [re]init
  • From: Tejun Heo
• Re: nonzero mismatch_cnt with no earlier error
  • From: Eyal Lebedinsky
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• [PATCH] sata_sil24: kill unused local variable idx in sil24_fill_sg()
  • From: Tejun Heo
• [PATCH] sata_mv: fix DMA boundary, 64-bit PCI DMA issues
  • From: Jeff Garzik
• Re: end to end error recovery musings
  • From: Douglas Gilbert
• Re: end to end error recovery musings
  • From: Neil Brown
• [PATCH, RFT, v2] sata_mv: convert to new EH
  • From: Jeff Garzik
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: [PATCH] libata: Use new id_to_dma_mode function to tidy reporting in more drivers (minimally tested)
  • From: Jeff Garzik
• Re: [PATCH]: Add id_to_dma_mode function for printing DMA modes
  • From: Jeff Garzik
• Re: [PATCH 2.6.21-rc1] sata_promise: fix 20619 new EH merge error
  • From: Jeff Garzik
• Re: [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH]: via 6421 PATA support done in a rather cleaner fashion
  • From: Alan
• Re: [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection
  • From: Alan
• 2.6.21-rc1: known regressions (part 1)
  • From: Adrian Bunk
• Re: [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection
  • From: Tejun Heo
• Re: [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection
  • From: Bartlomiej Zolnierkiewicz
• Re: Fwd: [LIBATA] drives not detected
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2.6.21-rc1] sata_promise: simplify port setup
  • From: Mikael Pettersson
• Re: 2.6.20-git10 (and -git13): BUG at drivers/pci/pci.c:817 during resume from disk
  • From: Tejun Heo
• Re: 2.6.20-git10 (and -git13): BUG at drivers/pci/pci.c:817 during resume from disk
  • From: Adrian Bunk
• Re: [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection
  • From: Tejun Heo
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection
  • From: Alan
• Re: [PATCH] libata: clear drvdata in ata_host_release()
  • From: Alan
• [PATCH 2.6.21-rc1] sata_promise: fix 20619 new EH merge error
  • From: Mikael Pettersson
• [PATCH] sata_mv: fix 50xx irq mask
  • From: Jeff Garzik
• [PATCH] sata_mv: clean up EDMA config register usage
  • From: Jeff Garzik
• Re: 2.6.20-git10 (and -git13): BUG at drivers/pci/pci.c:817 during resume from disk
  • From: Tejun Heo
• [PATCH, RFT, v1] sata_mv: convert to new EH
  • From: Jeff Garzik
• Re: [PATCH]: via 6421 PATA support done in a rather cleaner fashion
  • From: Graham W. Mitchell
• Re: [BUG] PATA_PCMCIA does not work
  • From: Komuro
• Re: [PATCH 2.6.21-rc1] sata_vsc: refactor vsc_sata_interrupt and hook up error handling
  • From: Jeff Garzik
• Re: [PATCH] sata_sil: ignore and clear spurious IRQs while executing commands by polling
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: fix pci_enable_msi() error handling
  • From: Jeff Garzik
• Re: [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection
  • From: Jeff Garzik
• Re: [PATCH] libata: clear drvdata in ata_host_release()
  • From: Jeff Garzik
• Re: [BUG] PATA_PCMCIA does not work
  • From: Jeff Garzik
• Re: [RFT] libata hpa support
  • From: Jeff Garzik
• Re: [RFT] libata hpa support
  • From: Alan
• Re: 2.6.20-git10 (and -git13): BUG at drivers/pci/pci.c:817 during resume from disk
  • From: Adrian Bunk
• Re: [PATCH]: pcmcia - spot slave decode flaws (for testing)
  • From: Eric D. Mudama
• Re: end to end error recovery musings
  • From: Chris Wedgwood
• Re: Fwd: [LIBATA] drives not detected
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT] libata hpa support
  • From: Kyle McMartin
• Re: PMP patches for more recent kernel?
  • From: Pierre Ossman
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Fwd: [LIBATA] drives not detected
  • From: Bartlomiej Zolnierkiewicz
• 2.6.21-rc1: irq 11: nobody cared with PCMCIA CF adapter
  • From: Benjamin LaHaise
• Re: hdb: irq timeout: status=0xd0 { Busy }
  • From: Andreas Arens
• Re: hdb: irq timeout: status=0xd0 { Busy }
  • From: Andreas Arens
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Fwd: [LIBATA] drives not detected
  • From: Bartlomiej Zolnierkiewicz
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• [PATCH] sata_sil: ignore and clear spurious IRQs while executing commands by polling
  • From: Tejun Heo
• Re: Fwd: [LIBATA] drives not detected
  • From: Tejun Heo
• Re: [PATCH] libata: clear drvdata in ata_host_release()
  • From: Alan
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Disk stuck in error recovery loop with AHCI
  • From: Jim Paris
• [PATCH] libata: clear drvdata in ata_host_release()
  • From: Tejun Heo
• [PATCH] sata_mv: fix pci_enable_msi() error handling
  • From: Tejun Heo
• Re: [PATCH 2.6.20] libata: Support HDIO_DRIVE_TASKFILE ioctl
  • From: Tejun Heo
• Re: Disk stuck in error recovery loop with AHCI
  • From: Tejun Heo
• Re: [PATCH 2.6.21-rc1] sata_vsc: refactor vsc_sata_interrupt and hook up error handling
  • From: Tejun Heo
• Re: end to end error recovery musings
  • From: Theodore Tso
• Re: end to end error recovery musings
  • From: H. Peter Anvin
• Re: PMP patches for more recent kernel?
  • From: Robin H. Johnson
• PMP patches for more recent kernel?
  • From: Pierre Ossman
• Re: Patch: slight shrink of vt6421_init_addrs()
  • From: Adam J. Richter
• Re: end to end error recovery musings
  • From: Andreas Dilger
• Re: end to end error recovery musings
  • From: H. Peter Anvin
• Re: [PATCH] (pata-2.6 fix queue) sl82c105: DMA support code cleanup (take 3)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2.6.21-rc1] sata_vsc: refactor vsc_sata_interrupt and hook up error handling
  • From: Dan Williams
• Re: [PATCH 2.6.21-rc1 1/2] sata_vsc: factor the error and normal intr paths into separate routines
  • From: Jeff Garzik
• Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Jeff Garzik
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: add/fix enablebits
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: use interrupt status from MRDMODE register
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT] libata hpa support
  • From: Colin Watson
• [RFT] libata hpa support
  • From: Kyle McMartin
• Re: [RFT] libata hpa support
  • From: Alan
• [PATCH] (pata-2.6 fix queue) sl82c105: DMA support code cleanup (take 3)
  • From: Sergei Shtylyov
• [PATCH] (pata-2.6 fix queue) sl82c105: DMA support code cleanup (take 2)
  • From: Sergei Shtylyov
• end to end error recovery musings
  • From: Ric Wheeler
• Re: hdb: irq timeout: status=0xd0 { Busy }
  • From: Alan
• Re: hdb: irq timeout: status=0xd0 { Busy }
  • From: Thue Janus Kristensen
• Re: hdb: irq timeout: status=0xd0 { Busy }
  • From: Alan
• hdb: irq timeout: status=0xd0 { Busy }
  • From: Thue Janus Kristensen
• Re: [PATCH] libata-eh: Add a simple mechanism for silencing error reporting
  • From: Alan
• Re: [PATCH]: pcmcia - spot slave decode flaws (for testing)
  • From: Alan
• [git patches] libata fixes for -rc
  • From: Jeff Garzik
• Re: [PATCH] remove duplicate ids from ata_piix
  • From: Jeff Garzik
• Re: [PATCH]: pcmcia - spot slave decode flaws (for testing)
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: complain on spurious completion notifiers
  • From: Jeff Garzik
• Re: [PATCH] libata: test major version in ata_id_is_sata()
  • From: Jeff Garzik
• Re: [PATCH] libata: fix remaining ap->id
  • From: Jeff Garzik
• Re: [PATCH 5/5] ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated)
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: kill old private BMDMA helper functions
  • From: Jeff Garzik
• Re: Patch: slight shrink of vt6421_init_addrs()
  • From: Jeff Garzik
• Re: [PATCH] libata: IORDY handling, quiet handling
  • From: Jeff Garzik
• Re: [PATCH] libata-eh: Add a simple mechanism for silencing error reporting
  • From: Jeff Garzik
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Fwd: [LIBATA] drives not detected
  • From: Jeff Garzik
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Disk stuck in error recovery loop with AHCI
  • From: Jim Paris
• Re: Fwd: [LIBATA] drives not detected
  • From: Tejun Heo
• Re: [PATCH 2.6.21-rc1 2/2] sata_vsc: clean up vsc_sata_interrupt
  • From: Tejun Heo
• Re: [PATCH 2.6.21-rc1 1/2] sata_vsc: factor the error and normal intr paths into separate routines
  • From: Tejun Heo
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Gary Hade
• Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Ask Bjørn Hansen
• Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Robert Hancock
• Re: libata FUA revisited
  • From: Robert Hancock
• Re: Question about PATA Sil680 Cache Line Size and Performance Degradation on ARM XScale
  • From: Jeff Garzik
• Re: Question about PATA Sil680 Cache Line Size and Performance Degradation on ARM XScale
  • From: Fajun Chen
• Re: libata FUA revisited
  • From: Ric Wheeler
• Re: libata FUA revisited
  • From: Ric Wheeler
• Re: libata FUA revisited
  • From: Ric Wheeler
• Re: Question about PATA Sil680 Cache Line Size and Performance Degradation on ARM XScale
  • From: Jeff Garzik
• Re: Question about PATA Sil680 Cache Line Size and Performance Degradation on ARM XScale
  • From: Alan
• Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Jens Axboe
• Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Ask Bjørn Hansen
• Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Mark Lord
• Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Jens Axboe
• Re: [PATCH] sata_nv: complain on spurious completion notifiers
  • From: Tejun Heo
• Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Jeff Garzik
• [PATCH] sata_nv: complain on spurious completion notifiers
  • From: Robert Hancock
• [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
  • From: Robert Hancock
• [PATCH 2.6.20] libata: Support HDIO_DRIVE_TASKFILE ioctl
  • From: Anand Kulkarni
• Re: Question about PATA Sil680 Cache Line Size and Performance Degradation on ARM XScale
  • From: Fajun Chen
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Gary Hade
• Re: Question about PATA Sil680 Cache Line Size and Performance Degradation on ARM XScale
  • From: Alan
• Question about PATA Sil680 Cache Line Size and Performance Degradation on ARM XScale
  • From: Fajun Chen
• Re: ATAPI DVD not detected
  • From: Vincent Legoll
• Re: ATAPI DVD not detected
  • From: Alan
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• ATAPI DVD not detected
  • From: Vincent Legoll
• [PATCH 2.6.21-rc1 2/2] sata_vsc: clean up vsc_sata_interrupt
  • From: Dan Williams
• [PATCH 2.6.21-rc1 1/2] sata_vsc: factor the error and normal intr paths into separate routines
  • From: Dan Williams
• [PATCH 2.6.21-rc1 0/2] sata_vsc regression fix and vsc_sata_interrupt_cleanup (take2)
  • From: Dan Williams
• Re: [git patches] libata ACPI support
  • From: Lukas Hejtmanek
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Sata_via problems in a Vintage2-AE1: Resume
  • From: Leopold Palomo-Avellaneda
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: [PATCH] libata: Remove duplicate dma blacklist entry
  • From: Alan
• Re: [PATCH] pata_pcmcia: Update device table
  • From: Alan
• Re: libata FUA revisited
  • From: Robert Hancock
• Re: Fwd: [LIBATA] drives not detected
  • From: Tejun Heo
• sata_promise exception errors with 2.6.20 kernel
  • From: Tomi Orava
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Tejun Heo
• Re: [PATCH 2/3] Don't change transfer speed while requests are in flight
  • From: Alan
• Re: [git patches] libata ACPI support
  • From: Lukas Hejtmanek
• Re: Sata_via problems in a Vintage2-AE1: Resume
  • From: Tejun Heo
• [PATCH] libata: test major version in ata_id_is_sata()
  • From: Tejun Heo
• Re: libata FUA revisited
  • From: Jens Axboe
• Re: libata FUA revisited
  • From: Tejun Heo
• Re: libata FUA revisited
  • From: Jens Axboe
• Re: libata FUA revisited
  • From: Jens Axboe
• Re: libata FUA revisited
  • From: Tejun Heo
• Re: [PATCH RFC] libata: FUA updates
  • From: Tejun Heo
• [PATCH] libata: fix remaining ap->id
  • From: Tejun Heo
• [PATCH 5/5] ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated)
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_vsc: clean up vsc_sata_interrupt
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_vsc: factor the error and normal intr paths into separate routines
  • From: Tejun Heo
• Re: Fwd: [LIBATA] drives not detected
  • From: Tejun Heo
• Disk stuck in error recovery loop with AHCI
  • From: Jim Paris
• [PATCH] sata_nv: kill old private BMDMA helper functions
  • From: Robert Hancock
• Re: [PATCH 1/3] Make the IDE DMA timeout modifiable
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/3] Make the IDE DMA timeout modifiable
  • From: Suleiman Souhlal
• Re: [PATCH 2/3] Don't change transfer speed while requests are in flight
  • From: Bartlomiej Zolnierkiewicz
• [patch 04/18] SCSI: add missing cdb clearing in scsi_execute()
  • From: Greg KH
• Re: [PATCH 1/3] Make the IDE DMA timeout modifiable
  • From: Bartlomiej Zolnierkiewicz
• [patch 11/21] pata_amd: fix an obvious bug in cable detection
  • From: Greg KH
• [patch 10/21] ide: fix drive side 80c cable check
  • From: Greg KH
• [PATCH 2/3] Don't change transfer speed while requests are in flight
  • From: Suleiman Souhlal
• [PATCH 3/3] Use correct IDE error recovery
  • From: Suleiman Souhlal
• [PATCH 1/3] Make the IDE DMA timeout modifiable
  • From: Suleiman Souhlal
• [PATCH 2/2] sata_vsc: clean up vsc_sata_interrupt
  • From: Dan Williams
• [PATCH 1/2] sata_vsc: factor the error and normal intr paths into separate routines
  • From: Dan Williams
• [PATCH 0/2] sata_vsc regression fix and vsc_sata_interrupt_cleanup
  • From: Dan Williams
• Re: [git patches] libata ACPI support
  • From: Jeff Garzik
• Re: 2.6.20-mm2
  • From: Rafael J. Wysocki
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: 2.6.20-mm2
  • From: Jeff Garzik
• Re: 2.6.20-mm2
  • From: Rafael J. Wysocki
• [PATCH]: pcmcia - spot slave decode flaws (for testing)
  • From: Alan
• Re: [PATCH] libata: s/ap->id/ap->print_id/g
  • From: Jeff Garzik
• [PATCH] libata: s/ap->id/ap->print_id/g
  • From: Tejun Heo
• Re: [PATCH 1/5] sata_nv: Add CPB register info to error_handler output
  • From: Jeff Garzik
• Re: [PATCH] pata_pcmcia: Update device table
  • From: Jeff Garzik
• Re: [PATCH] libata: Remove duplicate dma blacklist entry
  • From: Jeff Garzik
• Re: [PATCH] sata_via: fix resource-managed iomap conversion
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: delay on switching between NCQ and non-NCQ commands
  • From: Jeff Garzik
• Re: [PATCH] libata: disable pdev on all suspend events
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: separate out ata_ncq_enabled()
  • From: Jeff Garzik
• Re: [PATCH] libata: fix probe_ent alloc/free bugs
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: add back some verbosity into ADMA error_handler
  • From: Jeff Garzik
• Re: [PATCH] libata bugfix: HDIO_DRIVE_TASK
  • From: Jeff Garzik
• Re: [PATCH 3/3] libata: PATA driver for Celleb
  • From: Jeff Garzik
• Re: [PATCH 5/5] ahci: consider SDB FIS containing spurious NCQ completions HSM violation
  • From: Jeff Garzik
• Re: [PATCH 1/5] libata: improve ata_down_xfermask_limit()
  • From: Jeff Garzik
• Re: pata_amd dropping to PIO on resume
  • From: Alan
• Re: pata_amd dropping to PIO on resume
  • From: Jeff Garzik
• [PATCH 3/3] libata: fix ata_scsi_change_queue_depth()
  • From: Tejun Heo
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: add/fix enablebits
  • From: Sergei Shtylyov
• [PATCH 2/3] libata: fix ata_scmd_need_defer()
  • From: Tejun Heo
• [PATCH 1/3] libata: separate out ata_ncq_enabled()
  • From: Tejun Heo
• Re: sata_promise: random/intermittent errors
  • From: Marc Marais
• Re: [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Alan
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Fwd: [LIBATA] drives not detected
  • From: Tejun Heo
• [PATCH] sata_via: fix resource-managed iomap conversion
  • From: Tejun Heo
• [PATCH] libata: disable pdev on all suspend events
  • From: Tejun Heo
• Re: [PATCH] libata: fix probe_ent alloc/free bugs
  • From: Tejun Heo
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Geert Uytterhoeven
• Re: 2.6.20-mm2
  • From: Andrew Morton
• Re: sata_promise: random/intermittent errors
  • From: Marc Marais
• Re: 2.6.20-git10 (and -git13): BUG at drivers/pci/pci.c:817 during resume from disk
  • From: Tejun Heo
• [PATCH RFC] libata: FUA updates
  • From: Robert Hancock
• Re: 2.6.20-mm2
  • From: Rafael J. Wysocki
• [PATCH 4/5] sata_nv: Use notifier for completion checks
  • From: Robert Hancock
• [PATCH 3/5] sata_nv: Cleanup taskfile setup
  • From: Robert Hancock
• [PATCH 5/5] sata_nv: enable hotplug interrupt and fix some readl/readw mismatches
  • From: Robert Hancock
• [PATCH 2/5] sata_nv: cleanup CPB and APRD initialization
  • From: Robert Hancock
• [PATCH 1/5] sata_nv: Add CPB register info to error_handler output
  • From: Robert Hancock
• [PATCH 0/5] sata_nv: various cleanups and fixes
  • From: Robert Hancock
• [PATCH] libata: warn if speed limited due to 40-wire cable (v2)
  • From: Robert Hancock
• [PATCH] sata_nv: delay on switching between NCQ and non-NCQ commands
  • From: Robert Hancock
• Re: 2.6.20-mm2
  • From: Rafael J. Wysocki
• Re: 2.6.20-mm2
  • From: Rafael J. Wysocki
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: [PATCH 12/15] ide: make ide_hwif_t.ide_dma_host_on void
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: procfs code fixes/cleanups
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: add/fix enablebits
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: interrupt status fixes (resend)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cs: Update device table
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Alan
• Re: [PATCH 12/15] ide: make ide_hwif_t.ide_dma_host_on void
  • From: Olaf Hering
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Alan
• Re: pata_amd dropping to PIO on resume
  • From: Alan
• Re: libata FUA revisited
  • From: Robert Hancock
• Re: [git patches] more IDE updates
  • From: Sergei Shtylyov
• Re: [git patches] more IDE updates
  • From: Sergei Shtylyov
• Re: 2.6.20-mm2
  • From: Michal Piotrowski
• Re: 2.6.20-mm2
  • From: Rafael J. Wysocki
• Re: sata_promise: random/intermittent errors
  • From: Mikael Pettersson
• sata_promise: random/intermittent errors
  • From: Marc Marais
• Re: 2.6.20-mm2
  • From: Andrew Morton
• Re: 2.6.20-mm2
  • From: Michal Piotrowski
• Re: 2.6.20-mm2
  • From: Rafael J. Wysocki
• Re: 2.6.20-mm2
  • From: Andrew Morton
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: 2.6.20-mm2
  • From: Rafael J. Wysocki
• [PATCH] libata: Remove duplicate dma blacklist entry
  • From: Magnus Damm
• [PATCH] pata_pcmcia: Update device table
  • From: Magnus Damm
• [PATCH] ide: Remove duplicate dma blacklist entry
  • From: Magnus Damm
• [PATCH] ide-cs: Update device table
  • From: Magnus Damm
• [git patches] libata ACPI support
  • From: Jeff Garzik
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Jeff Garzik
• Re: [PATCH] libata: fix probe_ent alloc/free bugs
  • From: Sergei Shtylyov
• Re: [PATCH] libata: fix probe_ent alloc/free bugs
  • From: James Bottomley
• Re: [PATCH] sata_via: fix resource-managed iomap conversion
  • From: Jay Cliburn
• Re: [PATCH] libata: fix probe_ent alloc/free bugs
  • From: James Bottomley
• Re: Implement the technote about promise/maxtor drives
  • From: Eric D. Mudama
• Re: [PATCH] libata: fix probe_ent alloc/free bugs
  • From: Sergei Shtylyov
• [PATCH] libata: fix probe_ent alloc/free bugs
  • From: Tejun Heo
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: [PATCH] libata: fix probe_ent free in ata_sas_port_alloc()
  • From: James Bottomley
• [PATCH] libata: fix probe_ent free in ata_sas_port_alloc()
  • From: Tejun Heo
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• 2.6.20-git10 (and -git13): BUG at drivers/pci/pci.c:817 during resume from disk
  • From: Rafael J. Wysocki
• Re: pata_amd dropping to PIO on resume
  • From: Tobias Diedrich
• [git patches] more IDE updates
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6.18,19] SATA boot problems (ICH6/ICH6W)
  • From: Gary Hade
• Re: pata_amd dropping to PIO on resume
  • From: Jeff Garzik
• Re: pata_amd dropping to PIO on resume
  • From: Robert Hancock
• Re: need help with ata error
  • From: Eyal Lebedinsky
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Benjamin Herrenschmidt
• [PATCH] (pata-2.6 fix queue) cmd64x: use interrupt status from MRDMODE register
  • From: Sergei Shtylyov
• [PATCH] (pata-2.6 fix queue) cmd64x:
  • From: Sergei Shtylyov
• Re: libata FUA revisited
  • From: Jeff Garzik
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Olaf Hering
• pata_amd dropping to PIO on resume
  • From: Tobias Diedrich
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Sergei Shtylyov
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Sergei Shtylyov
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Sergei Shtylyov
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Sergei Shtylyov
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Sergei Shtylyov
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Sergei Shtylyov
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Sergei Shtylyov
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Sergei Shtylyov
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Sergei Shtylyov
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Sergei Shtylyov
• Patch: slight shrink of vt6421_init_addrs()
  • From: Adam J. Richter
• Re: Patch: slight shrink of vt6421_init_addrs()
  • From: Adam J. Richter
• Re: [git patches] libata updates (mostly fixes)
  • From: Adrian Bunk
• [no subject]
  • From: Unknown
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• SATA Problem: port is slow to respond
  • From: Sigmund Scheinbar
• Re: Fwd: [LIBATA] drives not detected
  • From: Albert Lee
• Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support
  • From: Mikael Pettersson
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• [PATCH] use winbond libata instead of ide driver for pseries CD drives
  • From: Olaf Hering
• Re: Fwd: [LIBATA] drives not detected
  • From: Albert Lee
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Fwd: [LIBATA] drives not detected
  • From: Albert Lee
• Fwd: [LIBATA] drives not detected
  • From: Patrick Ale
• Re: Implement the technote about promise/maxtor drives
  • From: Albert Lee
• Re: Implement the technote about promise/maxtor drives
  • From: Albert Lee
• Re: sata_nv ADMA controller lockup investigation
  • From: Robert Hancock
• Re: [git patches] libata updates (mostly fixes)
  • From: Jeff Garzik
• Re: SiI 3114 and sata_sil
  • From: Jeff Garzik
• Re: SiI 3114 and sata_sil
  • From: Robin H. Johnson
• [PATCHSET] spidernet, sungem_phy: consolidated patch series
  • From: Linas Vepstas
• Re: BUG in libata from ata_sas_port_alloc
  • From: Darrick J. Wong
• Re: [git patches] libata updates (mostly fixes)
  • From: Linus Torvalds
• Re: [git patches] libata updates (mostly fixes)
  • From: Linus Torvalds
• Re: [git patches] libata updates (mostly fixes)
  • From: Jeff Garzik
• [git patches] libata updates (mostly fixes)
  • From: Jeff Garzik
• Re: [PATCH 2.6.20] sata_vsc: use default cache line size if non-zero
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: handle SError status indication
  • From: Jeff Garzik
• Re: [PATCH] sata_promise: new EH conversion for 20619 chips, take 2
  • From: Jeff Garzik
• Re: [PATCH] ATA convert GSI to irq on ia64
  • From: Jeff Garzik
• Re: [PATCH] add delay around sl82c105_reset_engine calls
  • From: Jeff Garzik
• Re: [PATCH] libata: clear TF before IDENTIFYing
  • From: Jeff Garzik
• Re: [PATCH] sata_promise: fix missing PATA cable detection
  • From: Jeff Garzik
• Re: [PATCH libata-dev#upstream-fixes] libata: fix drive side 80c cable check, take 3
  • From: Jeff Garzik
• Re: [PATCH] libata: Report PIO/DMA status when overriding set_mode
  • From: Jeff Garzik
• BUG in libata from ata_sas_port_alloc
  • From: James Bottomley
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: SiI 3114 and sata_sil
  • From: Jeff Garzik
• [PATCH] (pata-2.6 fix queue) cmd64x: procfs code fixes/cleanups
  • From: Sergei Shtylyov
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Linas Vepstas
• Re: SiI 3114 and sata_sil
  • From: Florin Andrei
• Re: SiI 3114 and sata_sil
  • From: Jeff Garzik
• SiI 3114 and sata_sil
  • From: Florin Andrei
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Arnd Bergmann
• Re: libata FUA revisited
  • From: Jens Axboe
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Linas Vepstas
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Jim Lewis
• [PATCH] (pata-2.6 fix queue) cmd64x: interrupt status fixes (resend)
  • From: Sergei Shtylyov
• Re: [PATCH] sata_via: fix resource-managed iomap conversion
  • From: Jarek Poplawski
• Re: Sata_via problems in a Vintage2-AE1: Resume
  • From: Leopold Palomo-Avellaneda
• Re: sata_nv ADMA controller lockup investigation
  • From: Jeff Garzik
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Jens Osterkamp
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt
• Re: spidernet (was Re: [PATCHSET] libata: PATA driver for Celleb)
  • From: Benjamin Herrenschmidt
• spidernet (was Re: [PATCHSET] libata: PATA driver for Celleb)
  • From: Jeff Garzik
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Jeff Garzik
• sata_nv ADMA controller lockup investigation
  • From: Robert Hancock
• [PATCH] (pata-2.6 fix queue) cmd64x: add/fix enablebits
  • From: Sergei Shtylyov
• [PATCH] (pata-2.6 fix queue) cmd64x: interrupt status fixes
  • From: Sergei Shtylyov
• [PATCH 7/8] ide: make legacy IDE VLB modules check for the "probe" kernel params (v2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) sl82c105: DMA support code cleanup
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] (pata-2.6 fix queue) sl82c105: rework PIO support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide/pci/delkin_cb.c: pci_module_init to pci_register_driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/8] ide: make legacy IDE VLB modules check for the "probe" kernel params
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/8] ide: make legacy IDE VLB modules check for the "probe" kernel params
  • From: Alan
• Re: [PATCH 7/8] ide: make legacy IDE VLB modules check for the "probe" kernel params
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/8] ide: make legacy IDE VLB modules check for the "probe" kernel params
  • From: Alan
• Re: [PATCHSET] libata: PATA driver for Celleb
  • From: Benjamin Herrenschmidt