The QDI init code contains some bugs which mean it only works if you have
a test setup that causes both a successful and failed probe. Fix this
Found by Philip Guo
(Who found it working on code analysis tools not running VLB IDE
controllers)
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc2/drivers/ata/pata_qdi.c linux-2.6.21-rc2/drivers/ata/pata_qdi.c
--- linux.vanilla-2.6.21-rc2/drivers/ata/pata_qdi.c 2007-03-01 13:36:03.000000000 +0000
+++ linux-2.6.21-rc2/drivers/ata/pata_qdi.c 2007-03-02 13:20:27.000000000 +0000
@@ -363,7 +365,8 @@
release_region(port, 2);
continue;
}
- ct += qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
+ if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
+ ct++;
}
if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
/* QD6580: dual channel */
@@ -375,11 +378,14 @@
res = inb(port + 3);
if (res & 1) {
/* Single channel mode */
- ct += qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
+ if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04))
+ ct++;
} else {
/* Dual channel mode */
- ct += qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04);
- ct += qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04);
+ if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0)
+ ct++;
+ if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0)
+ ct++;
}
}
}
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
