On Wednesday 21 February 2007 02:19, Suleiman Souhlal wrote:
> It can be changed via /proc/ide/hd?/settings.
Why do we need to change IDE DMA timeout dynamically?
BTW /proc/ide/hd?/settings is obsoleted
> Signed-off-by: Ed Falk <efalk@xxxxxxxxxx>
>
> ---
> drivers/ide/ide-dma.c | 3 ++-
> drivers/ide/ide.c | 2 ++
> include/linux/ide.h | 3 +++
> 3 files changed, 7 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
> index 08e7cd0..a8da725 100644
> --- a/drivers/ide/ide-dma.c
> +++ b/drivers/ide/ide-dma.c
> @@ -579,7 +579,8 @@ EXPORT_SYMBOL_GPL(ide_dma_setup);
> static void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
> {
> /* issue cmd to drive */
> - ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry);
> + ide_execute_command(drive, command, &ide_dma_intr, drive->dma_timeout,
> + dma_timer_expiry);
> }
>
> void ide_dma_start(ide_drive_t *drive)
> diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
> index b3c0818..ca841f2 100644
> --- a/drivers/ide/ide.c
> +++ b/drivers/ide/ide.c
> @@ -245,6 +245,7 @@ static void init_hwif_data(ide_hwif_t *h
> drive->name[1] = 'd';
> drive->name[2] = 'a' + (index * MAX_DRIVES) + unit;
> drive->max_failures = IDE_DEFAULT_MAX_FAILURES;
> + drive->dma_timeout = WAIT_DMA;
> drive->using_dma = 0;
> drive->vdma = 0;
> INIT_LIST_HEAD(&drive->list);
> @@ -1197,6 +1198,7 @@ void ide_add_generic_settings (ide_drive
> __ide_add_setting(drive, "init_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0);
> __ide_add_setting(drive, "current_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0);
> __ide_add_setting(drive, "number", SETTING_RW, -1, -1, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0);
> + __ide_add_setting(drive, "dma_timeout", SETTING_RW, -1, -1, TYPE_INT, 0, 2000000000, 1, 1, &drive->dma_timeout, NULL, 0);
> }
>
> /**
> diff --git a/include/linux/ide.h b/include/linux/ide.h
> index 79c0282..3861753 100644
> --- a/include/linux/ide.h
> +++ b/include/linux/ide.h
> @@ -183,6 +183,7 @@ #define WAIT_READY (5*HZ) /* 5sec - som
> #define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
> #define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
> #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
> +#define WAIT_DMA (20*HZ) /* 20sec - maximum wait for an IRQ to happen */
> #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
>
> /*
> @@ -638,6 +639,8 @@ typedef struct ide_drive_s {
> unsigned int drive_data; /* use by tuneproc/selectproc */
> unsigned int failures; /* current failure count */
> unsigned int max_failures; /* maximum allowed failure count */
> + int dma_timeout; /* number of jiffies to wait for a
> + dma to complete */
> u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
>
> u64 capacity64; /* total number of sectors */
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
