On 2/16/07, Albert Lee <albertcc@xxxxxxxxxx> wrote: :
It's strange that your on-board Promise adapter works but the add-on adapter detects no devices. Could you please try reloading the pata_pdc2027x driver by "rmmod pata_pdc2027x; modprobe pata_pdc2027x" and send the dmesg.
Ofcourse I can :) The output is attached as dmesg-reprobe.txt Maybe this it totaly unrelated, but I remember that in the IDE drivers there was an option to force the card online, even when the BIOS was disabled. I *do* see the drives being detected and it tells me the BIOS is installed on boot time, but you never know :) The controller with problems is scsi11 if I see correctly. Since on that channel no disks are attached and no "abnormal status" is outputted, you do see this "error" twice tho, since i have nothing connected to the secundary channel on both controllers. Patrick
ata9.00: disabled ata9.01: disabled Synchronizing SCSI cache for disk sdf: FAILED status = 0, message = 00, host = 4, driver = 00 <5>Synchronizing SCSI cache for disk sdg: FAILED status = 0, message = 00, host = 4, driver = 00 <6>ACPI: PCI interrupt for device 0000:00:0f.0 disabled ACPI: PCI interrupt for device 0000:00:0b.0 disabled pata_pdc2027x 0000:00:0b.0: version 0.74-ac5 ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 20 pata_pdc2027x 0000:00:0b.0: PLL input clock 16754 kHz ata11: PATA max UDMA/133 cmd 0xf88597c0 ctl 0xf8859fda bmdma 0xf8859000 irq 20 ata12: PATA max UDMA/133 cmd 0xf88595c0 ctl 0xf8859dda bmdma 0xf8859008 irq 20 scsi11 : pata_pdc2027x scsi12 : pata_pdc2027x ATA: abnormal status 0x8 on port 0xf88595df ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 19 (level, low) -> IRQ 20 pata_pdc2027x 0000:00:0f.0: PLL input clock 33508 kHz ata13: PATA max UDMA/133 cmd 0xf98a97c0 ctl 0xf98a9fda bmdma 0xf98a9000 irq 20 ata14: PATA max UDMA/133 cmd 0xf98a95c0 ctl 0xf98a9dda bmdma 0xf98a9008 irq 20 scsi13 : pata_pdc2027x ata13.00: ATA-7: Maxtor 6Y160P0, YAR41BW0, max UDMA/133 ata13.00: 320173056 sectors, multi 16: LBA48 ata13.01: ATA-6: WDC WD1200JB-00DUA3, 75.13B75, max UDMA/100 ata13.01: 234441648 sectors, multi 16: LBA48 ata13.00: configured for UDMA/133 ata13.01: configured for UDMA/100 scsi14 : pata_pdc2027x ATA: abnormal status 0x78 on port 0xf98a95df scsi 13:0:0:0: Direct-Access ATA Maxtor 6Y160P0 YAR4 PQ: 0 ANSI: 5 SCSI device sdf: 320173056 512-byte hdwr sectors (163929 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdf: 320173056 512-byte hdwr sectors (163929 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 13:0:0:0: Attached scsi disk sdf sd 13:0:0:0: Attached scsi generic sg5 type 0 scsi 13:0:1:0: Direct-Access ATA WDC WD1200JB-00D 75.1 PQ: 0 ANSI: 5 SCSI device sdg: 234441648 512-byte hdwr sectors (120034 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdg: 234441648 512-byte hdwr sectors (120034 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sd 13:0:1:0: Attached scsi disk sdg sd 13:0:1:0: Attached scsi generic sg6 type 0
