sata_sil used to trigger HSM error if IRQ occurs during polling
command. This didn't matter because polling wasn't used in sata_sil.
However, as of 2.6.20, all IDENTIFYs are performed by polling and
device detection sometimes fails due to spurious IRQ. This patch
makes sata_sil ignore and clear spurious IRQ while executing commands
by polling.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
This fixes bug#7996 and IMHO should also be included in -stable.
Thanks.
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 1487255..aaff357 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -386,9 +386,15 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
goto freeze;
}
- if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
+ if (unlikely(!qc))
goto freeze;
+ if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ /* this sometimes happens, just clear IRQ */
+ ata_chk_status(ap);
+ return;
+ }
+
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
case HSM_ST_FIRST:
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
