Linux 2.6.20
x86_64
nforce 410 chipset
ST3160811AS (Seagate 160GB SATA 2)
sata_nv 0000:00:0e.0: version 3.2
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE000 irq 23
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 23
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xE407
I bought this HD today and it is working perfectly, but it's
strange the last message. Should I worry about it?
I saw many similar logs on Google, so I think it's harmless,
right? Thanks!
If you want hdparm -I:
/dev/sda:
ATA device, with non-removable media
Model Number: ST3160811AS
Serial Number: 9PT030VD
Firmware Revision: 3.AAE
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific
minimum R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 208, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5
*udma6 Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
fraga@tux ~/src$ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
002e-002e : w83627hf WDT
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:0d.0
0170-0177 : libata
01f0-01f7 : 0000:00:0d.0
01f0-01f7 : libata
0290-0297 : pnp 00:0a
0295-0296 : w83627ehf
0376-0376 : 0000:00:0d.0
0376-0376 : libata
03c0-03df : vga+
03f6-03f6 : 0000:00:0d.0
03f6-03f6 : libata
0500-0503 : ACPI PM1a_EVT_BLK
0504-0505 : ACPI PM1a_CNT_BLK
0508-050b : ACPI PM_TMR
0520-0527 : ACPI GPE0_BLK
0600-063f : 0000:00:0a.1
0700-073f : 0000:00:0a.1
0cf8-0cff : PCI conf1
2000-207f : motherboard
2080-20ff : motherboard
5010-5015 : ACPI CPU throttle
d000-dfff : PCI Bus #04
dc00-dc1f : 0000:04:08.0
dc00-dc1f : ne2k-pci
e000-e00f : 0000:00:0e.0
e000-e00f : sata_nv
e080-e083 : 0000:00:0e.0
e080-e083 : sata_nv
e400-e407 : 0000:00:0e.0
e400-e407 : sata_nv
e480-e483 : 0000:00:0e.0
e480-e483 : sata_nv
e800-e807 : 0000:00:0e.0
e800-e807 : sata_nv
ffa0-ffaf : 0000:00:0d.0
ffa0-ffaf : libata
fraga@tux ~/src$ cat /proc/interrupts
CPU0
0: 166525 IO-APIC-edge timer
1: 603 IO-APIC-edge i8042
8: 2 IO-APIC-edge rtc
9: 0 IO-APIC-fasteoi acpi
12: 3 IO-APIC-edge i8042
14: 2 IO-APIC-edge libata
15: 19 IO-APIC-edge libata
18: 10852 IO-APIC-fasteoi nvidia
19: 561 IO-APIC-fasteoi eth0
20: 133 IO-APIC-fasteoi HDA Intel
21: 3 IO-APIC-fasteoi ehci_hcd:usb2
22: 3806 IO-APIC-fasteoi ohci_hcd:usb1
23: 5765 IO-APIC-fasteoi libata
NMI: 80
LOC: 166397
ERR: 0
--
http://u-br.net
Linux 2.6.20: Homicidal Dwarf Hamster
gcc (GCC) 4.1.2
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
