[PATCH] pata_hpt3x3: clean up by using cable method

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Alan Cox <alan@xxxxxxxxxx>

diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc2/drivers/ata/pata_hpt3x3.c linux-2.6.21-rc2/drivers/ata/pata_hpt3x3.c
--- linux.vanilla-2.6.21-rc2/drivers/ata/pata_hpt3x3.c	2007-03-01 13:36:03.000000000 +0000
+++ linux-2.6.21-rc2/drivers/ata/pata_hpt3x3.c	2007-03-01 15:37:02.236887688 +0000
@@ -25,25 +25,6 @@
 #define DRV_NAME	"pata_hpt3x3"
 #define DRV_VERSION	"0.4.2"
 
-static int hpt3x3_probe_init(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	hpt3x3_probe_reset	-	reset the hpt3x3 bus
- *	@ap: ATA port to reset
- *
- *	Perform the housekeeping when doing an ATA bus reeset. We just
- *	need to force the cable type.
- */
-
-static void hpt3x3_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	hpt3x3_set_piomode		-	PIO setup
  *	@ap: ATA interface
@@ -137,8 +118,9 @@
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt3x3_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux