Linux Device Tree
[Prev Page][Next Page]
- Re: [PATCH v1 05/12] ARM: dts: microchip: sam9x60: Add OTPC node
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 1/9] of: property: add of_graph_get_next_port()
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH 7/7] arm64: tegra: Create SKU8 AGX Orin board file
- From: Brad Griffis <bgriffis@xxxxxxxxxx>
- Re: [PATCH v4 4/4] dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v4 3/4] ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v4 2/4] ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v4 1/4] ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH PATCH] arm64: dts: sunxi: nanopi-neo-plus2: Add pio regulators
- From: Kryštof Černý <cleverline1mc@xxxxxxxxx>
- Re: [PATCH v2 0/7] Add input voltage suppliers for PMIC MCP16502 regulators
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 13/13] media: qcom: camss: Add support for VFE hardware version Titan 780
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
- From: Alper Nebi Yasak <alpernebiyasak@xxxxxxxxx>
- Re: [PATCH 12/13] media: qcom: camss: Add CSID Gen3 support for sm8550
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: vfe: Move common code into vfe core
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH 08/13] media: qcom: camss: csid: Move common code into csid core
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH 7/8] dt-bindings: arm: rockchip: Add Relfor Saib
- From: karthikeyan <karthikeyan@xxxxxxxxxxx>
- Re: [PATCH v2 2/4] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c
- From: Simon Horman <horms@xxxxxxxxxx>
- Re: [PATCH] i2c: qcom-cci: Stop complaining about DT set clock rate
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH PATCH] arm64: dts: sunxi: nanopi-neo-plus2: Add pio regulators
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v3 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH] i2c: qcom-cci: Stop complaining about DT set clock rate
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v3 5/5] arm64: dts: qcom: sdm670: add camss and cci
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- RE: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v3 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v4 0/7] riscv: sophgo: Add pinctrl support for CV1800 series SoC
- From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
- Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v3 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V8 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH PATCH] arm64: dts: sunxi: nanopi-neo-plus2: Add pio regulators
- From: Kryštof Černý <cleverline1mc@xxxxxxxxx>
- Re: [PATCH] of_reserved_mem: Save region name string into struct reserved_mem
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 7/7] arm64: tegra: Create SKU8 AGX Orin board file
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 8/8] ARM: dts: rockchip: Add Relfor Saib board
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH -next] of/platform: Simplify with scoped for each OF child
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 10/12] dt-bindings: spi: Add rockchip,rk3576-spi compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 08/12] dt-bindings: gpu: Add rockchip,rk3576-mali compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 07/12] dt-bindings: mmc: Add support for rk3576 eMMC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/1] dt-bindings: nvmem: sfp: add ref to nvmem-deprecated-cells.yaml
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: ti: Add BeagleY-AI
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH PATCH] arm64: dts: sunxi: nanopi-neo-plus2: Add pio regulators
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 01/16] dt-bindings: dma: qcom,bam: Add bam pipe lock
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH PATCH] arm64: dts: sunxi: nanopi-neo-plus2: Add pio regulators
- From: Kryštof Černý <cleverline1mc@xxxxxxxxx>
- Re: [PATCH v2 01/16] dt-bindings: dma: qcom,bam: Add bam pipe lock
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH net-next v5 1/2] dt-bindings: net: dsa: microchip: Add KSZ8895/KSZ8864 switch support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v12 09/12] dt-bindings: marvell: Document PXA1908 SoC
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 04/12] dt-bindings: iio: adc: Add rockchip,rk3576-saradc string
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH next 1/2] dt-bindings: net: bluetooth: nxp: support multiple init baudrates
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/8] ARM: dts: rockchip: Add i2s0 node for RV1126
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: interconnect: qcom: Do not require reg for sc8180x virt NoCs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 08/11] misc: rp1: RaspberryPi RP1 misc driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH net-next v5 2/2] net: dsa: microchip: Add KSZ8895/KSZ8864 switch support
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH 5/8] Documentation: bindings: rtc: add clock-cells property
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
- Re: [PATCH 6/7] x86/hyperv: Reserve real mode when ACPI wakeup mailbox is available
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 5/5] arm64: dts: qcom: sdm670: add camss and cci
- From: Richard Acayan <mailingradian@xxxxxxxxx>
- Re: [PATCH] dt-bindings: interconnect: qcom: Do not require reg for sc8180x virt NoCs
- From: Georgi Djakov <djakov@xxxxxxxxxx>
- [PATCH v2 9/9] x86/hyperv: Use wakeup mailbox for VTL2 guests if available
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 8/9] x86/hyperv: Set realmode_limit to 4G for VTL2 TDX guest
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 7/9] x86/hyperv: Move setting the real_mode_header to hv_vtl_init_platform
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 6/9] x86/realmode: Add memory range support to reserve_real_mode
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 5/9] x86/hyperv: Mark ACPI wakeup mailbox page as private
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 4/9] x86/hyperv: Parse the ACPI wakeup mailbox
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 3/9] x86/dt: Support the ACPI multiprocessor wakeup for device tree
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 2/9] dt-bindings: x86: Add a binding for x86 wakeup mailbox
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 1/9] x86/acpi: Move ACPI MADT wakeup to generic code
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH v2 0/9] x86/hyperv: Support wakeup mailbox for VTL2 TDX guest
- From: Yunhong Jiang <yunhong.jiang@xxxxxxxxxxxxxxx>
- [PATCH net-next v5 2/2] net: dsa: microchip: Add KSZ8895/KSZ8864 switch support
- From: <Tristram.Ha@xxxxxxxxxxxxx>
- [PATCH net-next v5 1/2] dt-bindings: net: dsa: microchip: Add KSZ8895/KSZ8864 switch support
- From: <Tristram.Ha@xxxxxxxxxxxxx>
- [PATCH net-next v5 0/2] net: dsa: microchip: Add KSZ8895/KSZ8864 switch support
- From: <Tristram.Ha@xxxxxxxxxxxxx>
- [PATCH v2 3/4] arm64: dts: ti: k3-am62p: add opp frequencies
- From: Bryan Brattlof <bb@xxxxxx>
- [PATCH v2 0/4] arm64: dts: ti: k3-am62{a,p}x-sk: add opp frequencies
- From: Bryan Brattlof <bb@xxxxxx>
- [PATCH v2 1/4] arm64: dts: ti: k3-am62a: add opp frequencies
- From: Bryan Brattlof <bb@xxxxxx>
- [PATCH v2 4/4] arm64: dts: ti: k3-am62p5-sk: add 1.4ghz opp entry
- From: Bryan Brattlof <bb@xxxxxx>
- [PATCH v2 2/4] arm64: dts: ti: k3-am62a7-sk: add 1.4ghz opp entry
- From: Bryan Brattlof <bb@xxxxxx>
- [PATCH 7/7] arm64: tegra: Create SKU8 AGX Orin board file
- From: Dara Stotland <dstotland@xxxxxxxxxx>
- [PATCH 6/7] arm64: tegra: Add thermal nodes to AGX Orin SKU8
- From: Dara Stotland <dstotland@xxxxxxxxxx>
- [PATCH 5/7] arm64: tegra: Move BPMP nodes to AGX Orin module
- From: Dara Stotland <dstotland@xxxxxxxxxx>
- [PATCH 4/7] arm64: tegra: Move padctl supply nodes to AGX Orin module
- From: Dara Stotland <dstotland@xxxxxxxxxx>
- [PATCH 3/7] arm64: tegra: Move AGX Orin nodes to correct location
- From: Dara Stotland <dstotland@xxxxxxxxxx>
- [PATCH 2/7] arm64: tegra: Combine IGX Orin board files
- From: Dara Stotland <dstotland@xxxxxxxxxx>
- [PATCH 1/7] arm64: tegra: Combine AGX Orin board files
- From: Dara Stotland <dstotland@xxxxxxxxxx>
- [PATCH 0/7] Tegra234 AGX Orin DTS Updates
- From: Dara Stotland <dstotland@xxxxxxxxxx>
- Re: [PATCH net-next v2 1/2] dt-bindings: pse: tps23881: add reset-gpios
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH net-next v2 2/2] net: pse-pd: tps23881: Support reset-gpios
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: airoha: Add EN7581 pinctrl controller
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v12 11/12] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 07/12] clk: mmp: Add Marvell PXA1908 APMU driver
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 10/12] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 12/12] MAINTAINERS: add myself as Marvell PXA1908 maintainer
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 06/12] clk: mmp: Add Marvell PXA1908 APBCP driver
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 09/12] dt-bindings: marvell: Document PXA1908 SoC
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 08/12] clk: mmp: Add Marvell PXA1908 MPMU driver
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 05/12] clk: mmp: Add Marvell PXA1908 APBC driver
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 02/12] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 04/12] dt-bindings: clock: Add Marvell PXA1908 clock bindings
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 03/12] pinctrl: single: add marvell,pxa1908-padconf compatible
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 01/12] clk: mmp: Switch to use struct u32_fract instead of custom one
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- [PATCH v12 00/12] Initial Marvell PXA1908 support
- From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@xxxxxxxxxx>
- Re: [PATCH v3 13/17] dt-bindings: Move google,cros-ec-typec binding to usb
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v2 2/4] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v3 15/17] platform/chrome: cros_ec_typec: Add support for signaling DP HPD via drm_bridge
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v3 16/17] platform/chrome: cros_ec_typec: Support DP muxing
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v25 21/33] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 26/33] ALSA: usb-audio: Prevent starting of audio stream if in use
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 22/33] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 27/33] ALSA: usb-audio: qcom: Add USB QMI definitions
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 13/33] ASoC: usb: Add PCM format check API for USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 18/33] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 00/33] Introduce QC USB SND audio offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 23/33] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 03/33] xhci: sideband: add initial api to register a sideband entity
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 08/33] usb: dwc3: Specify maximum number of XHCI interrupters
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 16/33] ASoC: doc: Add documentation for SOC USB
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 28/33] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 02/33] usb: host: xhci: Repurpose event handler for skipping interrupter events
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 17/33] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 07/33] usb: host: xhci-plat: Set XHCI max interrupters if property is present
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 29/33] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 12/33] ASoC: Add SOC USB APIs for adding an USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 09/33] ALSA: Add USB audio device jack type
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 10/33] ALSA: usb-audio: Export USB SND APIs for modules
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 11/33] ALSA: usb-audio: Check for support for requested audio format
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 24/33] ALSA: usb-audio: Introduce USB SND platform op callbacks
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 06/33] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 01/33] xhci: add helper to stop endpoint and wait for completion
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 14/33] ASoC: usb: Create SOC USB SND jack kcontrol
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 30/33] ALSA: usb-audio: qcom: Use card and PCM index from QMI request
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 25/33] ALSA: usb-audio: Save UAC sample size information
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 20/33] ASoC: qcom: qdsp6: q6afe: Increase APR timeout
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 19/33] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 31/33] ALSA: usb-audio: Add USB offload route kcontrol
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 33/33] ASoC: usb: Rediscover USB SND devices on USB port add
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 15/33] ASoC: usb: Fetch ASoC card and pcm device information
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 32/33] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 04/33] usb: xhci: Allow for secondary interrupter to set IMOD
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v25 05/33] usb: host: xhci-mem: Cleanup pending secondary event ring events
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v3 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/4] iio: magnetometer: ak8975: Relax failure on unknown id
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- [PATCH 1/1] dt-bindings: PCI: layerscape-pci: Add deprecated property 'num-viewport'
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH 1/7] iio: adc: ad7606: add 'bits' parameter to channels macros
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- RE: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] iio: adc: ad7625: add driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 4/4] iio: magnetometer: ak8975: Add AK09118 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/4] iio: magnetometer: ak8975: Relax failure on unknown id
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 01/11] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 0/7] pressure: bmp280: Minor cleanup and interrupt support
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v9 00/23] Support more Amlogic SoC families in crypto driver
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/2] wifi: wilc1000: Add WILC3000 support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 2/4] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c
- From: Simon Horman <horms@xxxxxxxxxx>
- Re: [PATCH 2/2] wifi: wilc1000: Add WILC3000 support
- From: <Ajay.Kathat@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: airoha: Add EN7581 pinctrl controller
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3] iommu/arm-smmu-qcom: hide last LPASS SMMU context bank from linux
- From: Will Deacon <will@xxxxxxxxxx>
- Re: [PATCH v3 2/2] mtd: rawnand: nuvoton: add new driver for the Nuvoton MA35 SoC
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 08/11] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: mtd: nuvoton,ma35d1-nand: add new bindings
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH 5/8] Documentation: bindings: rtc: add clock-cells property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 6/8] dt-bindings: vendor-prefixes: Add Relfor labs
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 7/8] dt-bindings: arm: rockchip: Add Relfor Saib
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] arm: dts: realview: Add/drop missing/spurious unit-addreses
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: airoha: Add EN7581 pinctrl controller
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: bluetooth: reference serial-peripheral-props.yaml
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 4/6] dt-bindings: gnss: reference serial-peripheral-props.yaml
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 4/4] wifi: wilc1000: Add WILC3000 support
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v2 2/4] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v2 3/4] wifi: wilc1000: Fold chip_allow_sleep()/chip_wakeup() into wlan.c
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v2 12/12] arm64: dts: rockchip: Add rk3576-armsom-sige5 board
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH 3/6] dt-bindings: bluetooth: move Bluetooth bindings to dedicated directory
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 11/12] arm64: dts: rockchip: Add rk3576 SoC base DT
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 10/12] dt-bindings: spi: Add rockchip,rk3576-spi compatible
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: Re: [PATCH v4 3/4] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v1 06/10] dt-bindings: pinctrl: samsung: add exynos8895-wakeup-eint compatible
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 net-next 2/3] net: phy: tja11xx: replace "nxp,rmii-refclk-in" with "nxp,phy-output-refclk"
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
- From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: rtc: Add Amlogic A311L2 and A113X2 rtc
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 0/4] Add pinctrl support for rk3576
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 06/14] Input: samsung-keypad - use guard notation to acquire mutex
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v4 0/7] media: mediatek: vcodec: fix v4l2_ctrl_request_complete fail
- From: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
- Re: [PATCH v4 0/7] riscv: sophgo: Add pinctrl support for CV1800 series SoC
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 01/16] dt-bindings: dma: qcom,bam: Add bam pipe lock
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v3 0/3] dpum clock support for Exynos Auto v9 SoC
- From: Kwanghoon Son <kwangson@xxxxxxxxx>
- [PATCH 8/8] ARM: dts: rockchip: Add Relfor Saib board
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- [PATCH 5/8] Documentation: bindings: rtc: add clock-cells property
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- [PATCH 3/8] ARM: dts: rockchip: Add pwm node for RV1126
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- [PATCH 7/8] dt-bindings: arm: rockchip: Add Relfor Saib
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- [PATCH 2/8] ARM: dts: rockchip: Add i2s0 node for RV1126
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- [PATCH 4/8] ARM: dts: rockchip: Add watchdog node for RV1126
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- [PATCH 6/8] dt-bindings: vendor-prefixes: Add Relfor labs
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- [PATCH 0/8] Add support Relfor Saib board which is based on Rockchip RV1109 SoC
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- [PATCH 1/8] ARM: dts: rockchip: Add i2c3 node for RV1126
- From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: ti: Add BeagleY-AI
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH v4 6/7] media: mediatek: vcodec: replace v4l2_m2m_next_src_buf with v4l2_m2m_src_buf_remove
- From: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
- From: Jie Luo <quic_luoj@xxxxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [PATCH v2 06/12] dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK3576
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 08/12] dt-bindings: gpu: Add rockchip,rk3576-mali compatible
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 07/12] dt-bindings: mmc: Add support for rk3576 eMMC
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 05/12] dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 04/12] dt-bindings: iio: adc: Add rockchip,rk3576-saradc string
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 02/12] dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 00/12] Add device tree for ArmSoM Sige 5 board
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 03/12] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v2 01/12] dt-bindings: arm: rockchip: Add ArmSoM Sige 5
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH v4 0/4] Add support for RZ/G2UL Display Unit
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH next 1/2] dt-bindings: net: bluetooth: nxp: support multiple init baudrates
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 2/3] dt-bindings: net: Add support for rk3576 dwmac
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v3 1/3] ethernet: stmmac: dwmac-rk: Fix typo for RK3588 code
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v3 3/3] ethernet: stmmac: dwmac-rk: Add GMAC support for RK3576
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH v4 5/7] media: mediatek: vcodec: store source vb2 buffer
- From: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
- [PATCH AUTOSEL 5.10 7/9] of/irq: Prevent device address out-of-bounds read in interrupt map walk
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH v3 2/3] dt-bindings: net: Add support for rk3576 dwmac
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v3 1/3] ethernet: stmmac: dwmac-rk: Fix typo for RK3588 code
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v3 0/3] Add GMAC support for rk3576
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH AUTOSEL 4.19 6/6] of/irq: Prevent device address out-of-bounds read in interrupt map walk
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.4 6/7] of/irq: Prevent device address out-of-bounds read in interrupt map walk
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.15 7/9] of/irq: Prevent device address out-of-bounds read in interrupt map walk
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.1 11/13] of/irq: Prevent device address out-of-bounds read in interrupt map walk
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH v13 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH AUTOSEL 6.6 17/20] of/irq: Prevent device address out-of-bounds read in interrupt map walk
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.10 19/24] of/irq: Prevent device address out-of-bounds read in interrupt map walk
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH v5 08/10] i2c: of-prober: Add GPIO support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 3/4] mmc: dw_mmc-rockchip: Skip all phases bigger than 270 degrees
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH v5 07/10] i2c: of-prober: Add regulator support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 06/10] i2c: Introduce OF component probe function
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- RE: [PATCH v4 0/4] Add support for RZ/G2UL Display Unit
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 0/6] rcar-vin: Add support for R-Car V4M
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: remoteproc: qcom: document hexagon based WCSS secure PIL
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 05/10] gpiolib: Add gpio_property_name_length()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 02/10] regulator: Move OF-specific regulator lookup code to of_regulator.c
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 6/6] arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 5/6] dt-bindings: media: renesas,vin: Add binding for V4M
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 4/6] media: rcar-vin: Add family compatible for R-Car Gen4 family
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 3/6] arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/6] arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: media: renesas,vin: Add Gen4 family fallback
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/4] mmc: dw_mmc-rockchip: Add internal phase support
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH v4 4/4] mmc: dw_mmc-rockchip: Add support for rk3576 SoCs
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH v4 0/4] Add support for RZ/G2UL Display Unit
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/4] dt-bindings: display: renesas,rzg2l-du: Document RZ/G2UL DU bindings
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH next 1/2] dt-bindings: net: bluetooth: nxp: support multiple init baudrates
- From: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
- [PATCH next 2/2] Bluetooth: btnxpuart: support multiple init baudrates
- From: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 4/7] media: mediatek: vcodec: using input information to get vb2 buffer
- From: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
- RE: [PATCH v4 4/4] arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: (subset) [PATCH v4 0/4] Add pinctrl support for rk3576
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v4 4/4] arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v9 3/3] dt-bindings: PCI: microchip,pcie-host: allow dma-noncoherent
- From: <daire.mcnamara@xxxxxxxxxxxxx>
- [PATCH v9 2/3] PCI: microchip: Fix inbound address translation tables
- From: <daire.mcnamara@xxxxxxxxxxxxx>
- [PATCH v9 1/3] PCI: microchip: Fix outbound address translation tables
- From: <daire.mcnamara@xxxxxxxxxxxxx>
- [PATCH v9 0/3] Fix address translations on MPFS PCIe controller
- From: <daire.mcnamara@xxxxxxxxxxxxx>
- Re: [PATCH v4 3/4] arm64: dts: renesas: r9a07g043u: Add DU node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v3] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support
- From: Tarang Raval <tarang.raval@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 11/11] arm64: dts: renesas: rzg3s-smarc-som: Enable i2c1 node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v5 10/11] arm64: dts: renesas: rzg3s-smarc: Enable i2c0 node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v5 09/11] arm64: dts: renesas: r9a08g045: Add I2C nodes
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [Upstream] [PATCH v3] arm64: dts: imx8mp-phyboard-pollux-rdk: Add support for PCIe
- From: Yannic Moog <Y.Moog@xxxxxxxxx>
- Re: [PATCH] dt-bindings: memory-controllers: renesas,rpc-if: add top-level constraints
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: clock: renesas,cpg-clocks: add top-level constraints
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v2 0/4] arm64: dts: renesas: Correct GICD and GICR sizes
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: r9a07g0{43,44,54}: Move regulator-vbus device node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- RE: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- RE: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
- From: Heiko Stübner <heiko@xxxxxxxxx>
- RE: [PATCH 3/3] arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] Add support for GE SUNH hot-pluggable connector (was: "drm: add support for hot-pluggable bridges")
- From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
- RE: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v5 08/10] i2c: of-prober: Add GPIO support
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH 08/11] misc: rp1: RaspberryPi RP1 misc driver
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH 08/11] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
- From: Tobias Sperling <tobias.sperling@xxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v4 4/4] pinctrl: rockchip: Add rk3576 pinctrl support
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH V8 1/2] dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
- From: wangshuaijie@xxxxxxxxxx
- [PATCH V8 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
- From: wangshuaijie@xxxxxxxxxx
- [PATCH V8 0/2] Add support for aw96103/aw96105 proximity sensor
- From: wangshuaijie@xxxxxxxxxx
- Re: [PATCH 0/4] Add new driver for WCSS secure PIL loading
- From: Gokul Sriram P <quic_gokulsri@xxxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: pinctrl: Add rk3576 pinctrl support
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH 08/11] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v5 07/10] i2c: of-prober: Add regulator support
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: renesas: r9a07g043u: Add vspd node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: clock: fix C3 PLL input parameter
- From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: renesas: r9a07g043u: Add fcpvd node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH 3/3] MAINTAINERS: Add an entry for Amlogic RTC driver
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH 0/3] support for amlogic rtc
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH 1/3] dt-bindings: rtc: Add Amlogic A311L2 and A113X2 rtc
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH 2/3] rtc: support for the Amlogic on-chip RTC
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- Re: [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: Add qcom,qmi-id for remote etm
- From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
- Re: [PATCH v2 01/16] dt-bindings: dma: qcom,bam: Add bam pipe lock
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: soc: renesas: Document RZ/V2H GP-EVK board
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- RE: [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- [PATCH v8 7/7] input: keyboard: support i.MX95 BBM module
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v8 6/7] rtc: support i.MX95 BBM RTC
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v8 5/7] firmware: imx: add i.MX95 MISC driver
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v8 4/7] firmware: arm_scmi: add NXP i.MX95 SCMI documentation
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v8 3/7] firmware: arm_scmi: add initial support for i.MX MISC protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v8 2/7] firmware: arm_scmi: add initial support for i.MX BBM protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v8 1/7] dt-bindings: firmware: add i.MX95 SCMI Extension protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v8 0/7] firmware: support i.MX95 SCMI BBM/MISC Extenstion
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- Re: [PATCH 06/14] Input: samsung-keypad - use guard notation to acquire mutex
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- RE: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v5 06/10] i2c: Introduce OF component probe function
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 06/14] Input: samsung-keypad - use guard notation to acquire mutex
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 4/8] PCI: Change the parent to correctly represent pcie hierarchy
- From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
- Re: [PATCH v2 4/8] PCI: Change the parent to correctly represent pcie hierarchy
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v4 7/8] arm64: dts: rockchip: enable USB-C on NanoPC-T6
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- Re: [PATCH v4 5/8] arm64: dts: rockchip: add IR-receiver to NanoPC-T6
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- RE: [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 36/36] MAINTAINERS: Add QE files related to the Freescale QMC controller
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 35/36] soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 34/36] soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 33/36] soc: fsl: qe: Add missing PUSHSCHED command
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 32/36] soc: fsl: qe: Add resource-managed muram allocators
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 31/36] soc: fsl: cpm1: qmc: Introduce qmc_version
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 30/36] soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 29/36] soc: fsl: cpm1: qmc: Handle RPACK initialization
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 28/36] soc: fsl: cpm1: qmc: Rename qmc_chan_command()
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 27/36] soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 26/36] soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 25/36] soc: fsl: cpm1: qmc: Re-order probe() operations
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 24/36] soc: fsl: cpm1: qmc: Introduce qmc_data structure
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 23/36] dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) QMC controller
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 22/36] soc: fsl: cpm1: qmc: Add missing spinlock comment
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 21/36] soc: fsl: cpm1: qmc: Fix 'transmiter' typo
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 20/36] soc: fsl: cpm1: qmc: Remove unneeded parenthesis
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 17/36] soc: fsl: cpm1: qmc: Rename QMC_TSA_MASK
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 16/36] soc: fsl: cpm1: tsa: Introduce tsa_serial_get_num()
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 15/36] MAINTAINERS: Add QE files related to the Freescale TSA controller
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 14/36] soc: fsl: cpm1: tsa: Add support for QUICC Engine (QE) implementation
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 13/36] soc: fsl: cpm1: tsa: Introduce tsa_version
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 12/36] soc: fsl: cpm1: tsa: Isolate specific CPM1 part from tsa_serial_{dis}connect()
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 19/36] soc: fsl: cpm1: qmc: Fix blank line and spaces
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 18/36] soc: fsl: cpm1: qmc: Use BIT(), GENMASK() and FIELD_PREP() macros
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 11/36] soc: fsl: cpm1: tsa: Introduce tsa_setup() and its CPM1 compatible version
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 10/36] soc: fsl: cpm1: tsa: Make SIRAM entries specific to CPM1
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 09/36] soc: fsl: cpm1: tsa: Use ARRAY_SIZE() instead of hardcoded integer values
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 08/36] soc: fsl: cpm1: tsa: Remove unused registers offset definition
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: mfd: mediatek: mt6397: Convert to DT schema format
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 07/36] dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) TSA controller
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 06/36] soc: fsl: cpm1: tsa: Add missing spinlock comment
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 05/36] soc: fsl: cpm1: tsa: Fix blank line and spaces
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 04/36] soc: fsl: cpm1: tsa: Use BIT(), GENMASK() and FIELD_PREP() macros
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 03/36] soc: fsl: cpm1: tsa: Fix tsa_write8()
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 02/36] soc: fsl: cpm1: qmc: Enable TRNSYNC only when needed
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH v2 01/36] soc: fsl: cpm1: qmc: Update TRNSYNC only in transparent mode
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- [PATCH v3] arm64: dts: imx8mp-phyboard-pollux-rdk: Add support for PCIe
- From: Benjamin Hahn <B.Hahn@xxxxxxxxx>
- Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v5 05/10] gpiolib: Add gpio_property_name_length()
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: (subset) [PATCH v9 4/4] clk: samsung: add top clock support for ExynosAuto v920 SoC
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: (subset) [PATCH v9 3/4] clk: samsung: clk-pll: Add support for pll_531x
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: (subset) [PATCH v9 2/4] arm64: dts: exynos: add initial CMU clock nodes in ExynosAuto v920
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: (subset) [PATCH v9 1/4] dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: ti: Add BeagleY-AI
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: Add qcom,qmi-id for remote etm
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/4] dt-bindings: mmc: Add support for rk3576 dw-mshc
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- RE: [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: pinctrl: Add rk3576 pinctrl support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/4] dt-bindings: soc: rockchip: Add rk3576 syscon compatibles
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- RE: [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 4/8] PCI: Change the parent to correctly represent pcie hierarchy
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: Add qcom,qmi-id for remote etm
- From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
- Re: [PATCH v9 2/4] arm64: dts: exynos: add initial CMU clock nodes in ExynosAuto v920
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 04/10] regulator: Do pure DT regulator lookup in of_regulator_bulk_get_all()
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v3 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v3 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH v4 4/4] mmc: dw_mmc-rockchip: Add support for rk3576 SoCs
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v5 03/10] regulator: Split up _regulator_get()
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v5 02/10] regulator: Move OF-specific regulator lookup code to of_regulator.c
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: mfd: mediatek: mt6397: Convert to DT schema format
- From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
- [PATCH 2/2] ARM: dts: aspeed: catalina: update io_expander7 & io_expander8 line name
- From: Potin Lai <potin.lai.pt@xxxxxxxxx>
- [PATCH 1/2] ARM: dts: aspeed: catalina: add pdb cpld io expander
- From: Potin Lai <potin.lai.pt@xxxxxxxxx>
- [PATCH 0/2] ARM: dts: aspeed: catalina: update IOEXP nodes
- From: Potin Lai <potin.lai.pt@xxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: clock: fix C3 PLL input parameter
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: imx8mp-evk: Add native HDMI output
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] dt-bindings: arm: sse710: Add Host Base System Control
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- RE: [PATCH v13 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
- From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: remoteproc: sse710: Add the External Systems remote processors
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: arm: aspeed: Add aspeed,video binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 06/14] Input: samsung-keypad - use guard notation to acquire mutex
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 3/4] mmc: dw_mmc-rockchip: Skip all phases bigger than 270 degrees
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v4 2/4] mmc: dw_mmc-rockchip: Add internal phase support
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v4 4/4] pinctrl: rockchip: Add rk3576 pinctrl support
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v4 2/4] grf: rk3576: Add default GRF values
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v6 3/3] clk: rockchip: Add clock controller for the RK3576
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v6 2/3] clk: rockchip: Add new pll type pll_rk3588_ddr
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: mediatek: mt8186: Add svs node
- From: Rohit Agarwal <rohiagar@xxxxxxxxxxxx>
- Re: [PATCH net-next v2 1/2] dt-bindings: pse: tps23881: add reset-gpios
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH net-next v2 2/2] net: pse-pd: tps23881: Support reset-gpios
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support
- From: Tarang Raval <tarang.raval@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: i2c: aspeed: drop redundant multi-master
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: imx8mp-evk: Add native HDMI output
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH 2/2] wifi: wilc1000: Add WILC3000 support
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 2/2] wifi: wilc1000: Add WILC3000 support
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v2] arm64: dts: imx8mp-evk: Add native HDMI output
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v1 1/2] Loongarch: EDAC driver for loongson memory controller
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] arm64: dts: imx8mp-evk: Add native HDMI output
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH v3 3/3] arm64: dts: amlogic: add C3 AW419 board
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v3 2/3] arm64: dts: amlogic: add some device nodes for C3
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v3 0/3] add some node for amlogic c3
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: clock: fix C3 PLL input parameter
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v2] arm64: dts: imx8mp-evk: Add native HDMI output
- From: Liu Ying <victor.liu@xxxxxxx>
- RE: [PATCH v2 net-next 2/3] net: phy: tja11xx: replace "nxp,rmii-refclk-in" with "nxp,phy-output-refclk"
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH net-next 2/2] net: phy: aquantia: allow forcing order of MDI pairs
- From: Andrew Lunn <andrew@xxxxxxx>
- RE: [PATCH v5 1/2] dt-bindings: arm: aspeed: Add aspeed,video binding
- From: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: i2c: aspeed: drop redundant multi-master
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- RE: [PATCH net-next v4 2/2] net: dsa: microchip: Add KSZ8895/KSZ8864 switch support
- From: <Tristram.Ha@xxxxxxxxxxxxx>
- RE: [PATCH net-next v4 2/2] net: dsa: microchip: Add KSZ8895/KSZ8864 switch support
- From: <Tristram.Ha@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] firmware: arm_scmi: Support 'reg-io-width' property for shared memory
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- [PATCH net-next v2 2/2] net: pse-pd: tps23881: Support reset-gpios
- From: Kyle Swenson <kyle.swenson@xxxxxxxx>
- [PATCH net-next v2 1/2] dt-bindings: pse: tps23881: add reset-gpios
- From: Kyle Swenson <kyle.swenson@xxxxxxxx>
- [PATCH net-next v2 0/2] net: pse-pd: tps23881: Reset GPIO support
- From: Kyle Swenson <kyle.swenson@xxxxxxxx>
- [PATCH v4 3/4] mmc: dw_mmc-rockchip: Skip all phases bigger than 270 degrees
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v4 2/4] mmc: dw_mmc-rockchip: Add internal phase support
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v4 4/4] mmc: dw_mmc-rockchip: Add support for rk3576 SoCs
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v4 1/4] dt-bindings: mmc: Add support for rk3576 dw-mshc
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v4 0/4] Add dw_mmc support for rk3576
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH v2 4/8] PCI: Change the parent to correctly represent pcie hierarchy
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v4 7/8] arm64: dts: rockchip: enable USB-C on NanoPC-T6
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v4 5/8] arm64: dts: rockchip: add IR-receiver to NanoPC-T6
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v4 1/8] arm64: dts: rockchip: define pinctl for SPI M1
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: airoha: Add EN7581 pinctrl controller
- From: Benjamin Larsson <benjamin.larsson@xxxxxxxxxx>
- Re: [PATCH v4 4/8] arm64: dts: rockchip: add SPI flash on NanoPC-T6
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v2 4/8] PCI: Change the parent to correctly represent pcie hierarchy
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v2 2/2] clk: qcom: Add support for Global Clock Controller on QCS8300
- From: Andrew Lunn <andrew@xxxxxxx>
- [PATCH v4 4/4] pinctrl: rockchip: Add rk3576 pinctrl support
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v4 3/4] dt-bindings: pinctrl: Add rk3576 pinctrl support
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v4 2/4] grf: rk3576: Add default GRF values
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v4 1/4] dt-bindings: soc: rockchip: Add rk3576 syscon compatibles
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v4 0/4] Add pinctrl support for rk3576
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: Add support for Global Clock Controller on QCS8300
- From: Andrew Lunn <andrew@xxxxxxx>
- [PATCH v6 3/3] clk: rockchip: Add clock controller for the RK3576
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v6 1/3] dt-bindings: clock, reset: Add support for rk3576
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v6 2/3] clk: rockchip: Add new pll type pll_rk3588_ddr
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- [PATCH v6 0/3] Add CRU support for rk3576 SoC
- From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
- Re: [PATCH 6/6] docs: iio: ad4030: add documentation
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 3/6] iio: adc: ad4030: add averaging support
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v2 4/8] PCI: Change the parent to correctly represent pcie hierarchy
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: airoha: Add EN7581 pinctrl controller
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH v4 0/2] Add Add elan-ekth6a12nay on the basis of elan-ekth6915
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- Re: [PATCH v3 0/3] dpum clock support for Exynos Auto v9 SoC
- From: David Virag <virag.david003@xxxxxxxxx>
- [PATCH v2] ARM: tegra: wire up two front panel LEDs on TrimSlice
- From: Tomasz Maciej Nowak <tmn505@xxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: remoteproc: sse710: Add the External Systems remote processors
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 06/14] Input: samsung-keypad - use guard notation to acquire mutex
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v4 0/2] Add Add elan-ekth6a12nay on the basis of elan-ekth6915
- From: Doug Anderson <dianders@xxxxxxxxxx>
- [PATCH v2 5/5] remoteproc: arm64: corstone1000: Add the External Systems driver
- From: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
- [PATCH v3 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- [PATCH v2 4/5] arm64: dts: corstone1000: Add External System support
- From: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
- [PATCH v2 3/5] arm64: dts: corstone1000: Add MHU nodes used by the External System
- From: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
- [PATCH v2 2/5] dt-bindings: arm: sse710: Add Host Base System Control
- From: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
- [PATCH v2 1/5] dt-bindings: remoteproc: sse710: Add the External Systems remote processors
- From: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
- [PATCH v2 0/5] remoteproc: arm64: Introduce remoteproc support for Corstone-1000 External Systems
- From: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx>
- Re: [PATCH v3 1/1] dt-bindings: PCI: layerscape-pci: Fix property 'fsl,pcie-scfg' type
- From: Frank Li <Frank.li@xxxxxxx>
- [PATCH v3 1/2] dt-bindings: arm: ti: Add BeagleY-AI
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH v8 00/11] PCI: imx6: Fix\rename\clean up and add lut information for imx95
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v3 2/3] coresight: Add support for trace filtering by source
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- RE: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 2/3] coresight: Add support for trace filtering by source
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v4 1/4] dt-bindings: display: renesas,rzg2l-du: Document RZ/G2UL DU bindings
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v4 4/4] arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v4 3/4] arm64: dts: renesas: r9a07g043u: Add DU node
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v4 0/4] Add support for RZ/G2UL Display Unit
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 01/11] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 net-next 2/3] net: phy: tja11xx: replace "nxp,rmii-refclk-in" with "nxp,phy-output-refclk"
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
- From: Ziyang Huang <hzyitc@xxxxxxxxxxx>
- Re: [PATCH v4 3/7] media: mediatek: vcodec: flush decoder before stream off
- From: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: mediatek: mt8186: Add svs node
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: airoha: Add EN7581 pinctrl controller
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: iio: adc: add ADI ad4030, ad4630 and ad4632
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 0/6] iio: adc: ad4030: new driver for AD4030 and similar ADCs
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: i2c: aspeed: drop redundant multi-master
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 13/14] ARM: s3c: crag6410: use software nodes/properties to set up GPIO keys
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 14/14] ARM: s3c: crag6410 - convert GPIO lookup tables to property entries
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 06/14] Input: samsung-keypad - use guard notation to acquire mutex
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/1] dt-bindings: crypto: fsl,sec-v4.0: add second register space for rtic
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 11/14] ARM: s3c: crag6410: switch keypad device to software properties
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 2/7] media: mediatek: vcodec: change flush decode order when stream off
- From: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
- [PATCH 16/16] arm64: defconfig: Enable RZ/G3S SYSC reset driver
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 12/16] phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 15/16] arm64: dts: renesas: rzg3s-smarc: Enable USB support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 14/16] arm64: dts: renesas: r9a08g045: Add USB support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 13/16] arm64: dts: renesas: Add #reset-cells to system controller node
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [no subject]
- [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 01/16] clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: renesas: white-hawk-single: Wire-up Ethernet TSN
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v5 7/9] dma-buf: heaps: restricted_heap: Add MediaTek restricted heap and heap_init
- From: Jens Wiklander <jens.wiklander@xxxxxxxxxx>
- Re: [PATCH 1/3] arm64: dts: qcom: sc8280xp-crd: enable wifi
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 08/11] misc: rp1: RaspberryPi RP1 misc driver
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/1] dt-bindings: extcon: convert extcon-usb-gpio.txt to yaml format
- From: Chanwoo Choi <chanwoo@xxxxxxxxxx>
- Re: [PATCH v3 16/17] platform/chrome: cros_ec_typec: Support DP muxing
- From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
- Re: [PATCH v5 05/10] gpiolib: Add gpio_property_name_length()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 15/17] platform/chrome: cros_ec_typec: Add support for signaling DP HPD via drm_bridge
- From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
- Re: [PATCH v4 1/1] dt-bindings: extcon: ptn5150: add child node port
- From: Chanwoo Choi <chanwoo@xxxxxxxxxx>
- Re: [PATCH v3 13/17] dt-bindings: Move google,cros-ec-typec binding to usb
- From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
- Re: [PATCH 08/11] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v5 08/10] i2c: of-prober: Add GPIO support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v5 07/10] i2c: of-prober: Add regulator support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 06/10] i2c: Introduce OF component probe function
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: white-hawk-cpu: Move avb0 reset gpio to mdio node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: (subset) [PATCH v3 1/1] dt-bindings: leds: convert leds-lm3692x to yaml format
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v5 04/10] regulator: Do pure DT regulator lookup in of_regulator_bulk_get_all()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: (subset) [PATCH V4 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
- From: Jie Luo <quic_luoj@xxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4M compatible
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4M compatible
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v5 03/10] regulator: Split up _regulator_get()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 02/10] regulator: Move OF-specific regulator lookup code to of_regulator.c
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 13/17] dt-bindings: Move google,cros-ec-typec binding to usb
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v13 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v4 7/8] arm64: dts: rockchip: enable USB-C on NanoPC-T6
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH v4 8/8] arm64: dts: rockchip: add Mask Rom key on NanoPC-T6
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH v4 6/8] arm64: dts: rockchip: enable GPU on NanoPC-T6
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH v4 5/8] arm64: dts: rockchip: add IR-receiver to NanoPC-T6
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH v4 2/8] dt-bindings: arm: rockchip: Add NanoPC-T6 LTS
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH v4 3/8] arm64: dts: rockchip: add NanoPC-T6 LTS
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH v4 4/8] arm64: dts: rockchip: add SPI flash on NanoPC-T6
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH v4 1/8] arm64: dts: rockchip: define pinctl for SPI M1
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH v4 0/8] FriendlyELEC NanoPC-T6 improvements
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- [PATCH] dt-bindings: i2c: aspeed: drop redundant multi-master
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 00/11] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Andrew Lunn <andrew@xxxxxxx>
- [PATCH 6/6] docs: iio: ad4030: add documentation
- From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
- [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
- From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
- [PATCH 5/6] iio: adc: ad4030: add support for ad4632-16 and ad4632-24
- From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
- [PATCH 3/6] iio: adc: ad4030: add averaging support
- From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
- [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
- From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
- [PATCH 0/6] iio: adc: ad4030: new driver for AD4030 and similar ADCs
- From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
- [PATCH 1/6] dt-bindings: iio: adc: add ADI ad4030, ad4630 and ad4632
- From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
- Re: [PATCH v5 01/10] of: dynamic: Add of_changeset_update_prop_string
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH net-next v7 2/2] net: ti: icssg-prueth: Add support for PA Stats
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH net-next v7 0/2] Add support for ICSSG PA_STATS
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH net-next v7 1/2] dt-bindings: soc: ti: pruss: Add documentation for PA_STATS support
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH net-next v6 2/2] net: ti: icssg-prueth: Add support for PA Stats
- From: "Anwar, Md Danish" <a0501179@xxxxxx>
- Re: [PATCH 2/2] wifi: wilc1000: Add WILC3000 support
- From: Alexis Lothoré <alexis.lothore@xxxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
- From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
- Re: [PATCH v2 01/16] dt-bindings: dma: qcom,bam: Add bam pipe lock
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [PATCH v2] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/5] dt-bindings: arm: Add Coresight TMC Control Unit hardware
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [PATCH v2] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support
- From: Tarang Raval <tarang.raval@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: remoteproc: qcom: document hexagon based WCSS secure PIL
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH net-next v6 2/2] net: ti: icssg-prueth: Add support for PA Stats
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH 0/4] Add new driver for WCSS secure PIL loading
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 2/2] clk: qcom: Add support for Global Clock Controller on QCS8300
- From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: clock: qcom: Add GCC clocks for QCS8300
- From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
- [PATCH v2 0/2] clk: qcom: Add support for GCC on QCS8300
- From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
- Re: [PATCH v7 0/7] firmware: support i.MX95 SCMI BBM/MISC Extenstion
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH v3 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/7] dt-bindings: pinctrl: Add support for Broadcom STB pin controller
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH v4 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip
- From: Ilya Orazov <ilordash02@xxxxxxxxx>
- [PATCH v4 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
- From: Ilya Orazov <ilordash02@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: remoteproc: qcom: document hexagon based WCSS secure PIL
- From: Gokul Sriram P <quic_gokulsri@xxxxxxxxxxx>
- Re: [PATCH v3 2/2] firmware: arm_scmi: Support 'reg-io-width' property for shared memory
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH v2 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH 0/4] Add new driver for WCSS secure PIL loading
- From: Gokul Sriram P <quic_gokulsri@xxxxxxxxxxx>
- Re: [PATCH 3/4] arm64: dts: qcom: ipq5332: add nodes to bringup q6
- From: Gokul Sriram P <quic_gokulsri@xxxxxxxxxxx>
- Re: [PATCH v3 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip
- From: Ilya Orazov <ilordash02@xxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [PATCH 2/2] wifi: wilc1000: Add WILC3000 support
- From: Simon Horman <horms@xxxxxxxxxx>
- Re: [PATCH v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
- From: Alexander Dahl <ada@xxxxxxxxxxx>
- Re: [PATCH v4] dt-bindings: hwmon: Add maxim max31790
- From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/7] mfd: add base driver for qnap-mcu devices
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH 06/11] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 3/5] dt-bindings: arm: Add Coresight TMC Control Unit hardware
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 01/11] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 00/11] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [PATCH v2 2/2] pinctrl: airoha: Add support for EN7581 SoC
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: pinctrl: airoha: Add EN7581 pinctrl controller
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v2 0/2] Add pinctrl support to EN7581 SoC
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: exynosautov9: Add dpum SysMMU
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- RE: [PATCH v2 net-next 2/3] net: phy: tja11xx: replace "nxp,rmii-refclk-in" with "nxp,phy-output-refclk"
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH 01/11] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 1/4] arm64: dts: k3-am62a-main: Add C7xv device node
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v5 4/4] arm64: dts: ti: k3-am62a7-sk: Enable ipc with Remoteproc nodes
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v5 2/4] arm64: dts: k3-am62a-mcu: Add R5F Remoteproc node
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v5 3/4] arm64: dts: k3-am62a-wakeup: Add R5F device node
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v5 0/4] Add R5F and C7x DSP nodes for AM62a SoC
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v5 10/10] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 09/10] platform/chrome: Introduce device tree hardware prober
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 08/10] i2c: of-prober: Add GPIO support
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 07/10] i2c: of-prober: Add regulator support
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 06/10] i2c: Introduce OF component probe function
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 05/10] gpiolib: Add gpio_property_name_length()
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 04/10] regulator: Do pure DT regulator lookup in of_regulator_bulk_get_all()
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 03/10] regulator: Split up _regulator_get()
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 02/10] regulator: Move OF-specific regulator lookup code to of_regulator.c
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 01/10] of: dynamic: Add of_changeset_update_prop_string
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 00/10] platform/chrome: Introduce DT hardware prober
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v1 2/2] gpio: Add G7 Aspeed gpio controller driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 00/11] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH 2/2] remoteproc: qcom: add hexagon based WCSS secure PIL driver
- From: Gokul Sriram P <quic_gokulsri@xxxxxxxxxxx>
- Re: [PATCH v3 1/1] dt-bindings: leds: convert leds-lm3692x to yaml format
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v11 1/4] dt-bindings: net: wireless: brcm4329-fmac: add pci14e4,449d
- From: Kalle Valo <kvalo@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: exynosautov9: Add dpum SysMMU
- From: Kwanghoon Son <k.son@xxxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: iio: adc: sophgo,cv18xx-saradc.yaml: Add Sophgo CV18XX SARADC binding
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- [PATCH v4] dt-bindings: hwmon: Add maxim max31790
- From: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 net-next 2/3] net: phy: tja11xx: replace "nxp,rmii-refclk-in" with "nxp,phy-output-refclk"
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v8 5/8] mtd: rawnand: qcom: use FIELD_PREP and GENMASK
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: amlogic: add support for Radxa ZERO 2 Pro
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4M compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4M compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: memory: mediatek: Add mt8188 SMI reset control binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH net-next 2/2] net: phy: aquantia: allow forcing order of MDI pairs
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/7] arm64: dts: rockchip: add NanoPC-T6 LTS
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- Re: [PATCH net-next 2/2] net: phy: aquantia: allow forcing order of MDI pairs
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: display: mediatek: dpi: Add power domains
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/7] arm64: dts: rockchip: add NanoPC-T6 LTS
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: Add qcom,qmi-id for remote etm
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH -next] of/platform: Simplify with scoped for each OF child
- From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
- [PATCH -next] of: overlay: Simplify with scoped for each OF child loop
- From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
- [PATCH -next] of: resolver: Simplify with scoped for each OF child loop
- From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
- Re: [PATCH v3 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V4 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/1] dt-bindings: extcon: ptn5150: add child node port
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v2] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
- From: Alexander Dahl <ada@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH net-next 2/2] net: phy: aquantia: allow forcing order of MDI pairs
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v3 3/3] arm64: dts: mediatek: mt8186: Add svs node
- From: Rohit Agarwal <rohiagar@xxxxxxxxxxxx>
- [PATCH v3 2/3] arm64: dts: mediatek: mt8186: Add power domain for DPI
- From: Rohit Agarwal <rohiagar@xxxxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: display: mediatek: dpi: Add power domains
- From: Rohit Agarwal <rohiagar@xxxxxxxxxxxx>
- [PATCH v3 0/3] Devicetree updates for MT8186
- From: Rohit Agarwal <rohiagar@xxxxxxxxxxxx>
- [PATCH 2/2] dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4M compatible
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]