Update the touchscreen power-supply from 'power-supply' to 'AVDD28-supply' and 'VDDIO-supply' as per the binding documentation in goodix.yaml. Fix below warning: arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtb: touchscreen@5d: 'power-supply' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso index 134bdf156607c..a3cba41d2b531 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso @@ -80,7 +80,8 @@ touchscreen@5d { interrupt-parent = <&gpio1>; interrupts = <6 8>; irq-gpios = <&gpio1 6 0>; - power-supply = <®_vcc_panel>; + AVDD28-supply = <®_vcc_panel>; + VDDIO-supply = <®_vcc_panel>; reset-gpios = <&gpio1 7 0>; }; }; -- 2.34.1