[PATCH 1/2] dt-bindings: clock: axi-clkgen: include AXI clk

[Nuno Sa <nuno.sa@xxxxxxxxxx>]

In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one.

In order to keep backward compatibility, the new axi clock must be the
last phandle in the array. To make the intent clear, a non mandatory
clock-names property is also being added.

Fixes: 0e646c52cf0e ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
---
 .../devicetree/bindings/clock/adi,axi-clkgen.yaml   | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 5e942bccf27787d7029f76fc1a284232fb7f279d..f5f80e61c119b8a68cb6e7a26ed275764f8d200f 100644
--- a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -26,9 +26,21 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
 
   '#clock-cells':
     const: 0
@@ -50,5 +62,6 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
     };

-- 
2.47.0