[PATCH 3/3] riscv: dts: sophgo: sg2042: add pinctrl support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add pinctrl node and related pin configuration for SG2042 SoC.

Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxx>
---
 .../boot/dts/sophgo/sg2042-milkv-pioneer.dts  | 72 +++++++++++++++++++
 arch/riscv/boot/dts/sophgo/sg2042.dtsi        |  6 ++
 2 files changed, 78 insertions(+)

diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index a3f9d6f22566..0654bcf00a52 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -27,6 +27,8 @@ &cgi_dpll1 {
 };
 
 &emmc {
+	pinctrl-0 = <&emmc_cfg>;
+	pinctrl-names = "default";
 	bus-width = <4>;
 	no-sdio;
 	no-sd;
@@ -36,6 +38,8 @@ &emmc {
 };
 
 &i2c1 {
+	pinctrl-0 = <&i2c1_cfg>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	mcu: syscon@17 {
@@ -45,7 +49,73 @@ mcu: syscon@17 {
 	};
 };
 
+&pinctrl {
+	emmc_cfg: sdhci-emmc-cfg {
+		sdhci-emmc-wp-pins {
+			pinmux = <PINMUX(PIN_EMMC_WP, 0)>;
+			bias-disable;
+			drive-strength-microamp = <21200>;
+			input-schmitt-disable;
+		};
+
+		sdhci-emmc-cd-pins {
+			pinmux = <PINMUX(PIN_EMMC_CD, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <21200>;
+			input-schmitt-enable;
+		};
+
+		sdhci-emmc-rst-pwr-pins {
+			pinmux = <PINMUX(PIN_EMMC_RST, 0)>,
+				 <PINMUX(PIN_EMMC_PWR_EN, 0)>;
+			bias-disable;
+			drive-strength-microamp = <21200>;
+			input-schmitt-disable;
+		};
+	};
+
+	i2c1_cfg: i2c1-cfg {
+		i2c1-pins {
+			pinmux = <PINMUX(PIN_IIC1_SDA, 0)>,
+				 <PINMUX(PIN_IIC1_SCL, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <21200>;
+			input-schmitt-enable;
+		};
+	};
+
+	sd_cfg: sdhci-sd-cfg {
+		sdhci-sd-cd-wp-pins {
+			pinmux = <PINMUX(PIN_SDIO_CD, 0)>,
+				 <PINMUX(PIN_SDIO_WP, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <21200>;
+			input-schmitt-enable;
+		};
+
+		sdhci-sd-rst-pwr-pins {
+			pinmux = <PINMUX(PIN_SDIO_RST, 0)>,
+				 <PINMUX(PIN_SDIO_PWR_EN, 0)>;
+			bias-disable;
+			drive-strength-microamp = <21200>;
+			input-schmitt-disable;
+		};
+	};
+
+	uart0_cfg: uart0-cfg {
+		uart0-rx-pins {
+			pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+				 <PINMUX(PIN_UART0_RX, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <21200>;
+			input-schmitt-enable;
+		};
+	};
+};
+
 &sd {
+	pinctrl-0 = <&sd_cfg>;
+	pinctrl-names = "default";
 	bus-width = <4>;
 	no-sdio;
 	no-mmc;
@@ -54,6 +124,8 @@ &sd {
 };
 
 &uart0 {
+	pinctrl-0 = <&uart0_cfg>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 4e5fa6591623..107565f22f79 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/sophgo,sg2042-pll.h>
 #include <dt-bindings/clock/sophgo,sg2042-rpgate.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/pinctrl-sg2042.h>
 #include <dt-bindings/reset/sophgo,sg2042-reset.h>
 
 #include "sg2042-cpus.dtsi"
@@ -181,6 +182,11 @@ rpgate: clock-controller@7030010368 {
 			#clock-cells = <1>;
 		};
 
+		pinctrl: pinctrl@7030011000 {
+			compatible = "sophgo,sg2042-pinctrl";
+			reg = <0x70 0x30011000 0x0 0x1000>;
+		};
+
 		clkgen: clock-controller@7030012000 {
 			compatible = "sophgo,sg2042-clkgen";
 			reg = <0x70 0x30012000 0x0 0x1000>;
-- 
2.47.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux