From: Heiko Stuebner <heiko.stuebner@xxxxxxxxx>
The jaguar has an hdmi output port, which is connected
to the hdmi0 controller of the rk3588.
Add the necessary plumbing to enable it using the recently merged
hdmi-qp controller.
Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxx>
---
.../arm64/boot/dts/rockchip/rk3588-jaguar.dts | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
index e24da1a4331d..6a59887979ce 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -8,6 +8,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
@@ -58,6 +59,17 @@ emmc_pwrseq: emmc-pwrseq {
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
};
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -271,6 +283,29 @@ &gpu {
status = "okay";
};
+&hdmi0 {
+ /* No CEC on Jaguar */
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>;
+ status = "okay";
+};
+
+&hdmi0_in {
+ hdmi0_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi0>;
+ };
+};
+
+&hdmi0_out {
+ hdmi0_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdptxphy_hdmi0 {
+ status = "okay";
+};
+
&i2c0 {
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
@@ -1052,3 +1087,18 @@ &usb_host1_ehci {
&usb_host1_ohci {
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi0_in_vp0>;
+ };
+};
--
2.45.2
