On 10/24/24 01:36, Markuss Broks wrote:
> Exynos 9810 is an ARMv8 mobile SoC found in various Samsung devices,
> such as Samsung Galaxy S9 (starlte), S9 Plus (star2lte),
> Note 9 (crownlte) and perhaps others.
>
> Add minimal support for this SoC, including basic stuff like:
> - PSCI for bringing up secondary cores
> - ARMv8 generic timer
> - GPIO and pinctrl.
>
> The firmware coming with the devices based on this SoC is buggy
> and doesn't configure CNTFRQ_EL0, as required by spec, so it's
> needed to hardcode the frequency in the timer node.
>
> Co-authored-by: Maksym Holovach <nergzd@xxxxxxxxxxxxx>
> Signed-off-by: Markuss Broks <markuss.broks@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi | 525 +++++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos9810.dtsi | 256 ++++++++++
> 2 files changed, 781 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..4b2ee59dc7241b0ec31c99fd909d1c5e25aa77e0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
> @@ -0,0 +1,525 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/*
> + * Samsung's Exynos 9810 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2024 Markuss Broks <markuss.broks@xxxxxxxxx>
> + * Copyright (c) 2024 Maksym Holovach <nergzd@xxxxxxxxxxxxx>
> + */
> +
> +#include "exynos-pinctrl.h"
> +
> +&pinctrl_alive {
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos9810-wakeup-eint",
> + "samsung,exynos850-wakeup-eint",
> + "samsung,exynos7-wakeup-eint";
> + };
> +
> + etc1: etc1-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
[snip]
> +
> + gpp3: gpp3-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg0: gpg0-gpio-bank {
gpgX comes before gppX, sort all the nodes :D
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
[snip]
> + };
> +};
> +
> +#include "exynos9810-pinctrl.dtsi"
> +#include "arm/samsung/exynos-syscon-restart.dtsi"
>
