From: Fabio Estevam <festevam@xxxxxxx>
According to imx-thermal.yaml, the anatop regulators should not
contain unit-address/reg entries.
Change it accordingly.
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx6sll.dtsi | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index 85fe2a4ab97a..0fc22c03ccea 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -507,12 +507,9 @@ anatop: anatop@20c8000 {
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg_3p0: regulator-3p0@20c8120 {
+ reg_3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
- reg = <0x20c8120>;
regulator-name = "vdd3p0";
regulator-min-microvolt = <2625000>;
regulator-max-microvolt = <3400000>;
--
2.34.1
