From: Fabio Estevam <festevam@xxxxxxx> According to imx-thermal.yaml, the valid compatible string for i.MX6SX is just: compatible = "fsl,imx6sx-tempmon". Also pass #thermal-sensor-cells = <0> as it is a required property. Signed-off-by: Fabio Estevam <festevam@xxxxxxx> --- arch/arm/boot/dts/nxp/imx/imx6sx.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index b386448486df..a4abaee771eb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -715,13 +715,14 @@ reg_soc: regulator-vddsoc { }; tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + compatible = "fsl,imx6sx-tempmon"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; fsl,tempmon = <&anatop>; nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; }; }; -- 2.34.1