[PATCH v6 08/12] arm64: dts: ti: k3-j721s2-evm*: Add bootph-* properties

[Manorit Chawdhry <m-chawdhry@xxxxxx>]

Adds bootph-* properties to the leaf nodes to enable bootloaders to
utilise them.

Following adds bootph-* to:
- pmic regulator for enabling AVS Support
- main_uart8, mcu_uart0(DM), wkup_uart0(TIFS) for Traces
- mmc0, mmc1, usb0, ospi0, ospi1 for enabling various bootmodes.

Reviewed-by: Andrew Davis <afd@xxxxxx>
Signed-off-by: Manorit Chawdhry <m-chawdhry@xxxxxx>
---

Notes:
    R-by picked up in v3 ( Andrew )

 arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 14 ++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi           |  3 +++
 2 files changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index c5a0b7cbb14f8866bbb06e337f1242455aeeea4e..e2fc1288ed07664591c2d645dc949f182dd71df7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -138,6 +138,7 @@ J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */
 			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
 			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
 		>;
+		bootph-all;
 	};
 
 	main_i2c3_pins_default: main-i2c3-default-pins {
@@ -165,6 +166,7 @@ J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
 			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
 			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
 		>;
+		bootph-all;
 	};
 
 	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
@@ -177,6 +179,7 @@ main_usbss0_pins_default: main-usbss0-default-pins {
 		pinctrl-single,pins = <
 			J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */
 		>;
+		bootph-all;
 	};
 
 	main_mcan3_pins_default: main-mcan3-default-pins {
@@ -200,6 +203,7 @@ wkup_uart0_pins_default: wkup-uart0-default-pins {
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	mcu_uart0_pins_default: mcu-uart0-default-pins {
@@ -209,6 +213,7 @@ J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
@@ -301,6 +306,7 @@ J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
 			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
 			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
 		>;
+		bootph-all;
 	};
 };
 
@@ -316,12 +322,14 @@ &wkup_uart0 {
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_uart0_pins_default>;
+	bootph-all;
 };
 
 &mcu_uart0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_uart0_pins_default>;
+	bootph-all;
 };
 
 &main_uart8 {
@@ -330,6 +338,7 @@ &main_uart8 {
 	pinctrl-0 = <&main_uart8_pins_default>;
 	/* Shared with TFA on this platform */
 	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+	bootph-all;
 };
 
 &main_i2c0 {
@@ -383,6 +392,7 @@ &main_sdhci0 {
 	/* eMMC */
 	status = "okay";
 	non-removable;
+	bootph-all;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
@@ -395,6 +405,7 @@ &main_sdhci1 {
 	disable-wp;
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vdd_sd_dv>;
+	bootph-all;
 };
 
 &mcu_cpsw {
@@ -444,6 +455,7 @@ &usbss0 {
 	status = "okay";
 	pinctrl-0 = <&main_usbss0_pins_default>;
 	pinctrl-names = "default";
+	bootph-all;
 	ti,vbus-divider;
 	ti,usb2-only;
 };
@@ -451,6 +463,7 @@ &usbss0 {
 &usb0 {
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
+	bootph-all;
 };
 
 &ospi1 {
@@ -464,6 +477,7 @@ flash@0 {
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <40000000>;
+		bootph-all;
 		cdns,tshsl-ns = <60>;
 		cdns,tsd2d-ns = <60>;
 		cdns,tchsh-ns = <60>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index 89252e4a5f1bc2472b2464faf2fb727c9eedab4e..b3a0385ed3d86cc6e63fe88a554364325fd7967c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -170,6 +170,7 @@ J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */
 			J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */
 			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */
 		>;
+		bootph-all;
 	};
 };
 
@@ -188,6 +189,7 @@ wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */
 			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */
 		>;
+		bootph-pre-ram;
 	};
 };
 
@@ -440,6 +442,7 @@ flash@0 {
 		spi-tx-bus-width = <8>;
 		spi-rx-bus-width = <8>;
 		spi-max-frequency = <25000000>;
+		bootph-all;
 		cdns,tshsl-ns = <60>;
 		cdns,tsd2d-ns = <60>;
 		cdns,tchsh-ns = <60>;

-- 
2.46.0