Am Mittwoch, 23. Oktober 2024, 18:41:04 CEST schrieb Chris Morgan:
> From: Chris Morgan <macromorgan@xxxxxxxxxxx>
>
> Enable the HDMI0 and GPU for the Indiedroid Nova.
in general please notice the "and" in your commit message. This generally
indicates a situation that wants to be more than one patch.
With the gpu + hdmi being close cousins and the gpu actually tiny,
there is not a big reason to resend this series though.
So I would've preferred 2 patches, but it'll do this time ;-)
Heiko
>
> Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
> ---
> .../dts/rockchip/rk3588s-indiedroid-nova.dts | 56 +++++++++++++++++++
> 1 file changed, 56 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
> index a4b930f6987f..547b3ca881e0 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
> @@ -5,6 +5,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/linux-event-codes.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> #include <dt-bindings/usb/pd.h>
> #include "rk3588s.dtsi"
>
> @@ -50,6 +51,17 @@ chosen {
> stdout-path = "serial2:1500000n8";
> };
>
> + hdmi0-con {
> + compatible = "hdmi-connector";
> + type = "c";
> +
> + port {
> + hdmi0_con_in: endpoint {
> + remote-endpoint = <&hdmi0_out_con>;
> + };
> + };
> + };
> +
> sdio_pwrseq: sdio-pwrseq {
> compatible = "mmc-pwrseq-simple";
> clock-names = "ext_clock";
> @@ -242,6 +254,35 @@ &gpio4 {
> "", "", "", "";
> };
>
> +&gpu {
> + mali-supply = <&vdd_gpu_s0>;
> + status = "okay";
> +};
> +
> +&hdmi0 {
> + pinctrl-0 = <&hdmim0_rx_hpdin>, <&hdmim0_tx0_scl>,
> + <&hdmim0_tx0_sda>, <&hdmim0_tx0_hpd>,
> + <&hdmim0_tx0_cec>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&hdmi0_in {
> + hdmi0_in_vp0: endpoint {
> + remote-endpoint = <&vp0_out_hdmi0>;
> + };
> +};
> +
> +&hdmi0_out {
> + hdmi0_out_con: endpoint {
> + remote-endpoint = <&hdmi0_con_in>;
> + };
> +};
> +
> +&hdptxphy_hdmi0 {
> + status = "okay";
> +};
> +
> &i2c0 {
> pinctrl-0 = <&i2c0m2_xfer>;
> pinctrl-names = "default";
> @@ -919,3 +960,18 @@ usbdp_phy0_dp_altmode_mux: endpoint@1 {
> };
> };
> };
> +
> +&vop {
> + status = "okay";
> +};
> +
> +&vop_mmu {
> + status = "okay";
> +};
> +
> +&vp0 {
> + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> + reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> + remote-endpoint = <&hdmi0_in_vp0>;
> + };
> +};
>
