When describing the PHYs on the Falcon Ethernet breakout board mdio
nodes will be needed to describe the connections, and each mdio node
will need to contain these two properties instead. This will make the
address-cells and size-cells described in the base SoC include file
redundant and they will produce warnings, remove them.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 7156b1a542e8..fe6d97859e4a 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -765,8 +765,6 @@ avb1: ethernet@e6810000 {
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds1 1>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
@@ -814,8 +812,6 @@ avb2: ethernet@e6820000 {
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds1 2>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
@@ -863,8 +859,6 @@ avb3: ethernet@e6830000 {
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds1 3>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
@@ -912,8 +906,6 @@ avb4: ethernet@e6840000 {
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds1 4>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
@@ -961,8 +953,6 @@ avb5: ethernet@e6850000 {
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds1 11>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
--
2.46.2
