From: Mesih Kilinc <mesihkilinc@xxxxxxxxx>
Allwinner suniv F1C100s now has basic audio codec support. Enable it
under device tree.
Signed-off-by: Mesih Kilinc <mesihkilinc@xxxxxxxxx>
---
arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
index 290efe026ceb..e4b41bc93852 100644
--- a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -336,5 +336,19 @@ uart2: serial@1c25800 {
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
+
+ codec: codec@1c23c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,suniv-f1c100s-codec";
+ reg = <0x01c23c00 0x400>;
+ interrupts = <21>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
+ clock-names = "apb", "codec";
+ dmas = <&dma SUN4I_DMA_NORMAL 12>,
+ <&dma SUN4I_DMA_NORMAL 12>;
+ dma-names = "rx", "tx";
+ resets = <&ccu RST_BUS_CODEC>;
+ status = "disabled";
+ };
};
};
--
2.34.1
