Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- [PATCH v2 2/7] staging:iio:ad2s90: Remove spi setup that should be done via dt, (continued)
- [PATCH v2] iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot,
Lorenzo Bianconi
- [PATCH 7/7] Staging: iio: adt7316: Use device tree data to assign irq_type,
Shreeya Patel
- [PATCH 6/7] Staging: iio: adt7316: Change the name from irq_flags to irq_type, Shreeya Patel
- [PATCH 5/7] Staging: iio: adt7316: Switch irq_flags to a local variable, Shreeya Patel
- [PATCH 4/7] Staging: iio: adt7316: Use device tree data to set ldac_pin,
Shreeya Patel
- [PATCH 3/7] Staging: iio: adt7316: Add of_device_id table,
Shreeya Patel
- [PATCH 2/7] Staging: iio: adt7316: Add an extra check for 'ret' equals to 0,
Shreeya Patel
- [PATCH 1/7] Staging: iio: adt7316: Set the data field,
Shreeya Patel
- [PATCH 0/7] Remove platform data and introduce DT bindings, Shreeya Patel
- [PATCH 0/2] Use OF API to get the driver data,
Slawomir Stepien
- [PATCH] iio: imu: st_lsm6dsx: add entry in MAINTAINERS file,
Lorenzo Bianconi
- [PATCH v4 0/4] staging: iio: ad7816: Switch to the gpio descriptor interface,
Nishad Kamdar
- Buffers and sampling frequency,
David Frey
- [PATCH v2 0/2] Add support for Microchip MCP41xxx/42xxx potentiometers,
Chris Coffey
- [PATCH v5 3/4] iio: adc: Add ad7124 support,
Stefan Popa
- [PATCH v5 4/4] dt-bindings: iio: adc: Add docs for ad7124,
Stefan Popa
- [PATCH v5 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file,
Stefan Popa
- [PATCH v5 1/4] iio: ad_sigma_delta: Allow to provide custom data register address,
Stefan Popa
- [PATCH v6 0/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC,
Matthias Kaehlcke
- [PATCH] iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot,
Lorenzo Bianconi
- [PATCH v6 0/2] staging: iio: adc: ad7280a: use devm API when applicable,
Slawomir Stepien
- [PATCH v2 0/9] add i2c controller support to st_lsm6dsx driver,
Lorenzo Bianconi
- [PATCH v2 1/9] iio: imu: st_lsm6dsx: introduce locked read/write utility routines, Lorenzo Bianconi
- [PATCH v2 2/9] iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap, Lorenzo Bianconi
- [PATCH v2 3/9] iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark, Lorenzo Bianconi
- [PATCH v2 4/9] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids, Lorenzo Bianconi
- [PATCH v2 5/9] iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine, Lorenzo Bianconi
- [PATCH v2 7/9] iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine, Lorenzo Bianconi
- [PATCH v2 6/9] iio: imu: st_lsm6dsx: add i2c embedded controller support, Lorenzo Bianconi
- [PATCH v2 8/9] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller, Lorenzo Bianconi
- [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors, Lorenzo Bianconi
- Re: [PATCH v2 0/9] add i2c controller support to st_lsm6dsx driver, Jonathan Cameron
- Adding IIO list archives to lore.kernel.org,
Himanshu Jha
- [PATCH 0/6] staging:iio:ad2s90: Add dt support and move out of staging,
Matheus Tavares
- [PATCH v4 4/4] dt-bindings: iio: adc: Add docs for ad7124,
Stefan Popa
- [PATCH v4 3/4] iio: adc: Add ad7124 support,
Stefan Popa
- [PATCH v4 2/4] dt-bindings: iio: adc: Add common ADCs properties to a separate file,
Stefan Popa
- [PATCH v4 1/4] iio: ad_sigma_delta: Allow to provide custom data register address, Stefan Popa
- [PATCH v3 0/4] staging: iio: ad7816: Switch to the gpio descriptor interface,
Nishad Kamdar
- [PATCH] iio: adc: sc27xx: Add ADC data conversion timeout,
Baolin Wang
- [PATCH] IIO: extend dac/MCP4922 to MCP49x1 devices,
Matt Walker
- [PATCH v2 0/2] pattern generation and gain update,
Giuliano Belinassi
- [PATCH v6 0/3] Add support for PNI RM3100 magnetometer,
Song Qiang
- [PATCH] iio: adc: max9611: convert to SPDX identifiers,
Kuninori Morimoto
- [PATCH] iio: adc: max11100: convert to SPDX identifiers,
Kuninori Morimoto
- [PATCH] iio: adc: rcar-gyroadc: convert to SPDX identifiers,
Kuninori Morimoto
- [PATCH 0/3] staging: iio: ad7780: pattern generation and gain update,
Giuliano Belinassi
- [PATCH v7 1/2] iio: light: Add support for vishay vcnl4035,
Parthiban Nallathambi
- [PATCH] iio: st-accel: add support for lis3de,
Heiko Stuebner
- [PATCH v2] staging: iio: adc: ad7280a: do not pass the copy of struct element,
Slawomir Stepien
- [PATCH] staging: iio: adc: ad7280a: do not pass the copy of struct element, Slawomir Stepien
- [PATCH 1/3] iio: adc: add STMPE ADC driver using IIO framework,
Philippe Schenker
- [PATCH] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx,
Chris Coffey
- Question about max frequency in ad2s90,
Matheus Tavares Bernardino
- [PATCH v4 0/2] staging: iio: ad7780: correct driver read,
Renato Lui Geh
- Work plan on ad5933,
Lucas Santos
- [PATCH 0/7] add i2c controller support to st_lsm6dsx driver,
Lorenzo Bianconi
- [PATCH v5 1/1] staging: iio: adc: ad7280a: use devm_* APIs,
Slawomir Stepien
- [PATCH v2 0/2] meson-saradc: add chip temperature support,
Martin Blumenstingl
- [PATCH v3 0/6] staging:iio:ad2s90: Add scale info and improve error handling,
Matheus Tavares
- [PATCH v5 0/3] Add support for PNI RM3100 magnetometer,
Song Qiang
- [PATCH] iio: sx932x: Add driver for Semtech sx932x proximity sensor,
Enrico Granata
- [PATCH v3 0/3] staging: iio: ad7780: correct driver read,
Renato Lui Geh
- [PATCH v7 0/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface.,
Nishad Kamdar
- [PATCH v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers,
Hans de Goede
- [RFC][PATCH v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes,
Andy Shevchenko
- [PATCH] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers,
Hans de Goede
- [PATCH v3 3/3] dt-bindings: iio: adc: Add docs for ad7124,
Stefan Popa
- [PATCH v3 2/3] iio: adc: Add ad7124 support,
Stefan Popa
- [no subject], stefan.popa
- [PATCH v3 1/3] iio: ad_sigma_delta: Allow to provide custom data register address, Stefan Popa
- [PATCH v3 0/3] Add Xilinx AMS Driver,
Manish Narani
- [PATCH] iio:st_magn: enable device after trigger,
Martin Kelly
- [PATCH v2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support,
Matt Ranostay
- [PATCH v4 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311,
Charles-Antoine Couret
- [PATCH 0/7] meson-saradc: add chip temperature support,
Martin Blumenstingl
- [PATCH v6 0/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface.,
Nishad Kamdar
- [PATCH v2 0/6] staging:iio:ad2s90: Add scale info and improve error handling,
Matheus Tavares
- [PATCH 0/2] iio: pressure: Add support for Honeywell HSC SPI sensors,
Carlos Iglesias
- [PATCH 2/2] iio: pressure: Add support for Honeywell HSC SPI sensors, Carlos Iglesias
[PATCH 1/1] staging: iio: adc: ad7280a: don't cast type inside switch expression,
Slawomir Stepien
[PATCH v5 0/2] staging: iio: ad2s1210: Switch to the gpio descriptor interface.,
Nishad Kamdar
[PATCH v2 1/4] iio: magnetometer: add clarifying comment,
Martin Kelly
[PATCH 0/6] staging:iio:ad2s90: Add scale info and improve error handling,
Matheus Tavares
[PATCH] iio:st_magn: enable trigger before enabling sensor,
Denis Ciocca
[PATCH v2 0/2] staging: iio: ad7780: correct driver read,
Renato Lui Geh
[PATCH v4 1/2] iio:temperature: Add MAX31856 thermocouple support,
Matt Weber
[PATCH] staging: iio: ad7780: update voltage on read,
Renato Lui Geh
[PATCH v4] staging: iio: ad2s1210: Switch to the gpio descriptor interface,
Nishad Kamdar
[PATCH 0/2] iio: potentiometer: tpl0102: improve driver to report steps/range,
Matt Ranostay
[PATCH 1/2] iio:magnetometer: st_magn: add LSM9DS1 support,
Martin Kelly
[PATCH v3] staging: iio: ad2s1210: Switch to the gpio descriptor interface,
Nishad Kamdar
[PATCH v5 00/11] AXP8x3 AC and battery power supply support,
Oskari Lemmela
- [PATCH v5 08/11] arm64: dts: allwinner: a64: pinebook: enable power supplies, Oskari Lemmela
- [PATCH v5 07/11] arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies, Oskari Lemmela
- [PATCH v5 10/11] mfd: axp20x: Add AC power supply cell for AXP813, Oskari Lemmela
- [PATCH v5 09/11] power: supply: add AC power supply driver for AXP813, Oskari Lemmela
- [PATCH v5 11/11] mfd: axp20x: Add supported cells for AXP803, Oskari Lemmela
- [PATCH v5 03/11] dt-bindings: gpio: gpio-axp209: add AXP803 GPIO bindings, Oskari Lemmela
- [PATCH v5 06/11] arm64: dts: allwinner: axp803: add AC and battery power supplies, Oskari Lemmela
- [PATCH v5 01/11] dt-bindings: power: supply: axp20x: add AXP813 AC power DT binding, Oskari Lemmela
- [PATCH v5 02/11] dt-bindings: power: supply: axp20x: add AXP803 power bindings, Oskari Lemmela
- [PATCH v5 05/11] ARM: dts: axp81x: add AC power supply subnode, Oskari Lemmela
- [PATCH v5 04/11] dt-bindings: iio: adc: add AXP803 ADC bindings, Oskari Lemmela
- Re: [PATCH v5 00/11] AXP8x3 AC and battery power supply support, Sebastian Reichel
[PATCH V3 1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311,
Charles-Antoine Couret
[PATCH V3 1/2] iio:adc:ad7949: Add AD7949 ADC driver family,
Charles-Antoine Couret
[PATCH 2/2] staging: iio: ad5933: Remove unnecessary blank line,
Victor Colombo
[PATCH 1/2] staging: iio: ad5933: Remove unnecessary space on casting,
Victor Colombo
[PATCH 0/2] staging: iio: ad5933: Remove unnecessary spaces, Victor Colombo
[PATCH] staging: iio: adt7316: Switch to the gpio descriptor interface,
Nishad Kamdar
[PATCH v2] staging: iio: ad2s1210: Switch to the gpio descriptor interface,
Nishad Kamdar
OSS Edinburgh, Jonathan Cameron
Re: [PATCH 09/10] tools iio: Override CFLAGS assignments,
Jonathan Cameron
[PATCH] staging: iio: ad2s1210: Switch to the gpio descriptor interface,
Nishad Kamdar
[PATCH 1/1] staging: iio: adc: ad7280a: handle error from __ad7280_read32(),
Slawomir Stepien
[PATCH v4 1/1] staging: iio: adc: ad7280a: use devm_* APIs,
Slawomir Stepien
Work plan on ad2s90,
Matheus Tavares Bernardino
[PATCH v3 1/1] staging: iio: adc: ad7280a: use devm_* APIs,
Slawomir Stepien
[PATCH v2 1/1] staging: iio: adc: ad7280a: use devm_* APIs, Slawomir Stepien
[PATCH v2 1/3] iio: ad_sigma_delta: Allow to provide custom data register address, Stefan Popa
[PATCH v2 3/3] dt-bindings: iio: adc: Add docs for ad7124,
Stefan Popa
[PATCH v2 2/3] iio: adc: Add ad7124 support, Stefan Popa
[PATCH v3 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table,
Slawomir Stepien
[PATCH v3 1/2] iio:temperature: Add MAX31856 thermocouple support,
Matt Weber
[PATCH v2 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table,
Slawomir Stepien
[PATCH 1/1] staging: iio: adc: ad7280a: use crc8.h API to build crc table, Slawomir Stepien
[PATCH 2/2] dt-bindings: iio: adc: Add docs for ad7124, Stefan Popa
[PATCH 1/2] iio: adc: Add ad7124 support,
Stefan Popa
[PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7606 ADC,
Stefan Popa
[PATCH 1/2] staging: iio: ad7606: Move out of staging,
Stefan Popa
[no subject], stefan.popa
Re: [PATCH] media: uvcvideo: Add boottime clock support,
Tomasz Figa
[PATCH v2] Staging iio: adc: Match parenthesis alignment,
Marcelo Schmitt
[PATCHv2 1/2] Add AD7949 ADC driver family,
Charles-Antoine Couret
[PATCH 1/1] staging: iio: adc: ad7280a: use devm_* APIs,
Slawomir Stepien
Questions related to some drivers,
Giuliano Belinassi
[PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface,
Nishad Kamdar
[PATCH] staging: iio: ad7280a: Lines should not end with a '(' - style,
Giuliano Belinassi
[PATCH][V2] iio: adc: ina2xx: add in early -EINVAL returns in case statements,
Colin King
[PATCH] Staging iio/adc: fixes parenthesis alignment,
Marcelo Schmitt
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
