Re: [PATCH v2 9/9] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Nov 11, 2018 at 03:15:36PM +0100, Lorenzo Bianconi wrote:
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> index 879322ad50fd..69d53d98d0f0 100644
> --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> @@ -13,6 +13,7 @@ Required properties:
>  Optional properties:
>  - st,drdy-int-pin: the pin on the package that will be used to signal
>    "data ready" (valid values: 1 or 2).
> +- st,pullups : enable/disable internal i2c controller pullup resistors.

bias-pull-up is the standard property for this.

>  - drive-open-drain: the interrupt/data ready line will be configured
>    as open drain, which is useful if several sensors share the same
>    interrupt line. This is a boolean property.
> -- 
> 2.19.1
> 



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux