Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH v3 1/5] drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support, (continued)
- [PATCH v5 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support,
Mårten Lindahl
- [PATCH] iio: light: cm32181: Fix PM support on system with 2 I2C resources,
Kai-Heng Feng
- [PATCH v4 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support,
Mårten Lindahl
- [PATCH v6 0/3] add imx93 adc support,
haibo . chen
- [PATCH v1 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name,
Andy Shevchenko
- [RFC PATCH v2 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace,
Marijn Suijten
- [PATCH v2 0/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.,
Philippe De Muyter
- [PATCH 0/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.,
Philippe De Muyter
- [PATCH] iio: adc: stm32: add oversampling support,
Olivier Moysan
- [PATCH] dt-bindings: iio: dac: Maxim max5522 DAC,
Jonathan Cameron
- [PATCH v4 0/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver,
Hugo Villeneuve
- [PATCH] dt-bindings: iio: addac: adi,74115: Add missing maxItems,
Michał Grzelak
- [PATCH] iio: proximity: sx_common: Drop documentation of non existent struct element.,
Jonathan Cameron
- [PATCH v3 0/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver,
Hugo Villeneuve
- [PATCH v11 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver, Biju Das
- [PATCH v11 3/6] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select, Biju Das
- [PATCH v11 5/6] MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver, Biju Das
- [PATCH v1 1/1] iio: chemical: scd30_core: Switch to use dev_err_probe(),
Andy Shevchenko
- [PATCH v1 1/1] iio: chemical: scd30_core: use sysfs_emit() to instead of scnprintf(),
Andy Shevchenko
- [PATCH] iio: chemical: scd30: Add check for NULL in scd30_i2c_command,
Anastasia Belova
- [PATCH] tools/iio/iio_utils:fix memory leak,
Yulong Zhang
- iio: hid: fix the retval in gyro_3d_capture_sample,
Dmitry Perchanov
- [PATCH] iio: hid: fix the retval in accel_3d_capture_sample,
Dmitry Perchanov
- sysfs mount_matrix for st_lsm6dsx gyro,
Philippe De Muyter
- [PATCH] iio: light : max44009 : Convert to i2c's .probe_new(),
Anup Sharma
- [PATCH v2 0/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver,
Hugo Villeneuve
- [PATCH v3 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support,
Mårten Lindahl
- [PATCH v2 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support,
Mårten Lindahl
- fxls8962af: RTC and NTP,
Sean Nyekjaer
- [PATCH v2] iio: temperature: Add MCP9600 thermocouple EMF converter driver,
Andrew Hepp
- [PATCH 1/4] counter: Sort the Kconfig entries alphabetically,
Peter Robinson
- BMI0160/260 conflicts,
Derek John Clark
[PATCH 0/2] Support ADC5_BAT_ID_100K_PU and use on PM7250b,
Luca Weiss
[PATCH 0/3] iio: st-sensors: Add LSM303C accelerometer+magnetometer,
Stephan Gerhold
Re: CM32181 Bug Report (Linux 6.0+),
Wahaj
[PATCH v2] iio: adc: stm32-dfsdm: add id registers support,
Olivier Moysan
[PATCH] iio: light: max44009: Remove the unused variable max44009_of_match,
Jiapeng Chong
[PATCH] drivers: iio: cdc: Drop redundant if check,
Alexander Vorwerk
[PATCH] iio: temperature: Add MCP9600 thermocouple EMF converter driver,
Andrew Hepp
[PATCH v1 1/1] iio: adc: max11410: Use asm intead of asm-generic,
Andy Shevchenko
[PATCH] iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m,
Vladimir Oltean
[PATCH v5 0/3] add imx93 adc support,
haibo . chen
[PATCH] iio: hid: fix the retval in [accel|gyro]_3d_capture_sample,
Dmitry Perchanov
[PATCH v2 0/3] iio: adc: ti-adc128s052: Some refactorings,
Andy Shevchenko
[PATCH] iio: adc: ep93xx: Enable wider build testing with COMPILE_TEST,
Jonathan Cameron
[PATCH v2 0/4] ARM: dts: qcom: pm8226: style fixes and new nodes,
Rayyan Ansari
[PATCH v4 0/4] iio: imu: fxos8700: fix bugs about ODR and changes for a good readability,
carlos . song
[PATCH v2 0/5] Add MAX77541/MAX77540 PMIC Support,
Okan Sahin
[PATCH v2 5/5] drivers: iio: adc: Add MAX77541 ADC Support,
Okan Sahin
[linux-next:master] BUILD REGRESSION c76083fac3bae1a87ae3d005b5cb1cbc761e31d5, kernel test robot
[PATCH v2 0/5] Add support for pressure sensor Bosch BMP580,
Angel Iglesias
[PATCH v4 0/3] add imx93 adc support,
haibo . chen
[PATCH 0/5] Add support for pressure sensor Bosch BMP580,
Angel Iglesias
[PATCH AUTOSEL 6.0 12/18] iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq(), Sasha Levin
[PATCH AUTOSEL 6.1 20/26] iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq(), Sasha Levin
[PATCH v3 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description,
Alexander Sverdlin
[PATCH] dt-bindings: iio: adc: maxim,max1363: fix interface typo,
Krzysztof Kozlowski
Re: KX132/134-1211,
Matti Vaittinen
[PATCH v1 0/3] iio: adc: ti-ads7924: add ADS7924 driver,
Hugo Villeneuve
[PATCH] iio: light: max44009: Convert to i2c's .probe_new(),
Uwe Kleine-König
[PATCH] IIO: hid-sensor-prox: add missing scale attribute,
Philipp Jungkamp
[PATCH] iio: adc: stm32-dfsdm: add id registers support,
Olivier Moysan
[PATCH v2 0/4] Add TI TMP116 Support,
Marco Felsch
[PATCH 0/2] iio: light: vcnl4000: Add vcnl4040 interrupt support,
Mårten Lindahl
[PATCH v2] iio: proximity: sx_common: Add old register mapping,
Gwendal Grignou
[PATCH 0/4] Add TI TMP116 Support,
Marco Felsch
[PATCH v2 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description,
Alexander Sverdlin
[PATCH v3 0/3] add imx93 adc support,
haibo . chen
[PATCH] ad_sigma_delta: fix race between IRQ and completion,
Daniel Beer
[PATCH] iio:adc:twl6030: Enable measurement of VAC,
Andreas Kemnade
[PATCH] HID: Recognize sensors with application collections too.,
Aditya Garg
[PATCH v10 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver,
Biju Das
[PATCH v10 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select, Biju Das
[PATCH] thermal: qcom-spmi-adc5: Suppress probe-deferral error message,
Marijn Suijten
[PATCH] dt-bindings: iio: adc: max1238: Fix a typo in the description,
Fabio Estevam
[PATCH 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description,
Alexander Sverdlin
[PATCH v2 1/3] iio: adc: add imx93 adc support,
haibo . chen
[PATCH v1 1/2] iio: adc: ti-adc128s052: Use get_unaligned_beXX(),
Andy Shevchenko
[PATCH v1 1/2] iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data(),
Andy Shevchenko
[PATCH v9 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver,
Biju Das
[PATCH v9 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select,
Biju Das
[PATCH v3 0/5] iio: imu: fxos8700: fix bugs about ODR and changes for a good readability,
carlos . song
[linux-next:master] BUILD REGRESSION 39ab32797f072eaf86b1faa7384ac73450684110, kernel test robot
[PATCH v3 0/4] FXLS8967AF and FXLS8974CF support,
Han Xu
[PATCH v8 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver,
Biju Das
[PATCH v8 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select,
Biju Das
[PATCH] iio: imu: kmx61: Fix spelling mistake "Errow" -> "Error",
Colin Ian King
[PATCH] iio: proximity: sx_common: Add old register mapping,
Gwendal Grignou
[PATCH v2 0/7] iio: imu: fxos8700: fix few bugs in data readback and mode set,
carlos . song
[PATCH v1 01/11] iio: light: tsl2563: Do not hardcode interrupt trigger type,
Andy Shevchenko
- [PATCH v1 03/11] iio: light: tsl2563: Configure INT in one place, Andy Shevchenko
- [PATCH v1 06/11] iio: light: tsl2563: Simplify with dev_err_probe, Andy Shevchenko
- [PATCH v1 11/11] iio: light: tsl2563: Keep Makefile sorted by module name, Andy Shevchenko
- [PATCH v1 02/11] iio: light: tsl2563: Use i2c_smbus_write_word_data() in tsl2563_configure(), Andy Shevchenko
- [PATCH v1 04/11] iio: light: tsl2563: Make use of the macros from bits.h, Andy Shevchenko
- [PATCH v1 10/11] iio: light: tsl2563: sort header inclusion alphabetically, Andy Shevchenko
- [PATCH v1 05/11] iio: light: tsl2563: Drop unused defintion(s), Andy Shevchenko
- [PATCH v1 08/11] iio: light: tsl2563: Utilise temporary variable for struct device, Andy Shevchenko
- [PATCH v1 07/11] iio: light: tsl2563: Drop legacy platform data code, Andy Shevchenko
- [PATCH v1 09/11] iio: light: tsl2563: Use dev_get_drvdata() directly in PM callbacks, Andy Shevchenko
- Re: [PATCH v1 01/11] iio: light: tsl2563: Do not hardcode interrupt trigger type, Jonathan Cameron
[PATCH 1/2] iio: accel: add the new entry in driver for FXLS8967AF,
Han Xu
[PATCH 0/5] staging: drivers: mfd: Add MAX77541 MFD and related device drivers,
Okan Sahin
[PATCH] iio: trigger: stm32-timer: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: st_sensors: Convert to use sysfs_emit_at() API,
ye.xingchen
[PATCH] iio: magnetometer: mag3110: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: magnetometer: hmc5843: Convert to use sysfs_emit_at() API,
ye.xingchen
[PATCH] iio: magnetometer: bmc150_magn: Convert to use sysfs_emit_at() API,
ye.xingchen
[PATCH] iio: light: zopt2201: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: light: tsl2772: Convert to use sysfs_emit()/sysfs_emit_at() APIs, ye.xingchen
[PATCH] iio: light: lv0104cs: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: light: ltr501: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: light: cm3232: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: light: bh1750: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: imu: st_lsm6dsx: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: humidity: hts211: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: health: afe440x: Convert to use sysfs_emit_at() API,
ye.xingchen
[PATCH] iio: chemical: scd30: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: adc: vf610_adc: Convert to use sysfs_emit_at() API,
ye.xingchen
[PATCH] iio: adc: nau7802: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: adc: adi-axi-adc: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: ad7768-1: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: ad7606: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: ad7192: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: mma8452: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: bma180: Convert to use sysfs_emit_at() API,
ye.xingchen
[PATCH] iio: adxl372: Convert to use sysfs_emit_at() API, ye.xingchen
[PATCH] iio: accel: Convert to use sysfs_emit_at() API,
ye.xingchen
[PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support,
Biju Das
[PATCH v2 0/4] dt-bindings: add missing subdevices to qcom-pm8xxx schema,
Dmitry Baryshkov
[PATCH] iio: chemical: atlas-ezo-sensor: refactor IIO_CHAN_INFO_SCALE checks,
Matt Ranostay
[PATCH v2] iio: adc: stm32-dfsdm: fill module aliases,
Olivier Moysan
run-time change of configuration of ad74412,
Rasmus Villemoes
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
