Re: [PATCH] iio: adc: ad7192: Fix ac excitation feature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 15 Jun 2023 13:46:44 +0200
Nuno Sá <noname.nuno@xxxxxxxxx> wrote:

> On Wed, 2023-06-14 at 18:52 +0300, Alisa Roman wrote:
> > AC excitation enable feature exposed to user on AD7192, allowing a bit
> > which should be 0 to be set. This feature is specific only to AD7195. AC
> > excitation attribute moved accordingly.
> > 
> > In the AD7195 documentation, the AC excitation enable bit is on position
> > 22 in the Configuration register. ACX macro changed to match correct
> > register and bit.
> > 
> > Note that the fix tag is for the commit that moved the driver out of
> > staging.
> > 
> > Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging")
> > Signed-off-by: Alisa Roman <alisa.roman@xxxxxxxxxx>
> > Cc: stable@xxxxxxxxxxxxxxx
> > ---  
> 
> Hi Alisa,
> 
> I see you improved the commit message to explain what's going on but you should
> have versioned your patches accordingly. Anyways, don't forget to do it next
> time :). You could also mention the name change AD7192_MODE_ACX ->
> AD7192_CONFIG_ACX even though it's a bit obvious. Anyways:
> 
> Reviewed-by: Nuno Sa <nuno.sa@xxxxxxxxxx>

Hi Alisa,

I've queued this up locally but as we are close to the merge window, my
fixes branch is in the odd state of being ahead of what it's usually based on.
As such I won't push it out until post merge window and won't push it out
in the meantime as it would make a mess of linux-next.

For now it's pushed out as fixes-testing so we can get some autobuilder coverage
on it.

Jonathan


> 
> >  drivers/iio/adc/ad7192.c | 16 ++++++++--------
> >  1 file changed, 8 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
> > index 8685e0b58a83..7bc3ebfe8081 100644
> > --- a/drivers/iio/adc/ad7192.c
> > +++ b/drivers/iio/adc/ad7192.c
> > @@ -62,7 +62,6 @@
> >  #define AD7192_MODE_STA_MASK   BIT(20) /* Status Register transmission Mask
> > */
> >  #define AD7192_MODE_CLKSRC(x)  (((x) & 0x3) << 18) /* Clock Source Select */
> >  #define AD7192_MODE_SINC3      BIT(15) /* SINC3 Filter Select */
> > -#define AD7192_MODE_ACX                BIT(14) /* AC excitation enable(AD7195
> > only)*/
> >  #define AD7192_MODE_ENPAR      BIT(13) /* Parity Enable */
> >  #define AD7192_MODE_CLKDIV     BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
> >  #define AD7192_MODE_SCYCLE     BIT(11) /* Single cycle conversion */
> > @@ -91,6 +90,7 @@
> >  /* Configuration Register Bit Designations (AD7192_REG_CONF) */
> >  
> >  #define AD7192_CONF_CHOP       BIT(23) /* CHOP enable */
> > +#define AD7192_CONF_ACX                BIT(22) /* AC excitation enable(AD7195
> > only) */
> >  #define AD7192_CONF_REFSEL     BIT(20) /* REFIN1/REFIN2 Reference Select */
> >  #define AD7192_CONF_CHAN(x)    ((x) << 8) /* Channel select */
> >  #define AD7192_CONF_CHAN_MASK  (0x7FF << 8) /* Channel select mask */
> > @@ -472,7 +472,7 @@ static ssize_t ad7192_show_ac_excitation(struct device
> > *dev,
> >         struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> >         struct ad7192_state *st = iio_priv(indio_dev);
> >  
> > -       return sysfs_emit(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX));
> > +       return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX));
> >  }
> >  
> >  static ssize_t ad7192_show_bridge_switch(struct device *dev,
> > @@ -513,13 +513,13 @@ static ssize_t ad7192_set(struct device *dev,
> >  
> >                 ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon);
> >                 break;
> > -       case AD7192_REG_MODE:
> > +       case AD7192_REG_CONF:
> >                 if (val)
> > -                       st->mode |= AD7192_MODE_ACX;
> > +                       st->conf |= AD7192_CONF_ACX;
> >                 else
> > -                       st->mode &= ~AD7192_MODE_ACX;
> > +                       st->conf &= ~AD7192_CONF_ACX;
> >  
> > -               ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
> > +               ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
> >                 break;
> >         default:
> >                 ret = -EINVAL;
> > @@ -579,12 +579,11 @@ static IIO_DEVICE_ATTR(bridge_switch_en, 0644,
> >  
> >  static IIO_DEVICE_ATTR(ac_excitation_en, 0644,
> >                        ad7192_show_ac_excitation, ad7192_set,
> > -                      AD7192_REG_MODE);
> > +                      AD7192_REG_CONF);
> >  
> >  static struct attribute *ad7192_attributes[] = {
> >         &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
> >         &iio_dev_attr_bridge_switch_en.dev_attr.attr,
> > -       &iio_dev_attr_ac_excitation_en.dev_attr.attr,
> >         NULL
> >  };
> >  
> > @@ -595,6 +594,7 @@ static const struct attribute_group ad7192_attribute_group
> > = {
> >  static struct attribute *ad7195_attributes[] = {
> >         &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
> >         &iio_dev_attr_bridge_switch_en.dev_attr.attr,
> > +       &iio_dev_attr_ac_excitation_en.dev_attr.attr,
> >         NULL
> >  };
> >    
> 





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux