Re: [PATCH] dt-bindings: iio: adc: ti,ads1015: fix datarate max value and meaning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 21 Jun 2023 21:41:05 +0100
Conor Dooley <conor@xxxxxxxxxx> wrote:

> On Wed, Jun 21, 2023 at 06:08:57PM +0200, Marco Felsch wrote:
> > Datarate (dr) is a 3-bit wide register field. Values from 0 to 7 are
> > allowed for all devices but only for the ADS1115 devices a value of 7
> > does make a difference.
> > 
> > While on it fix the description of the datarate for ADS1115 devices as
> > well.
> > 
> > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/iio/adc/ti,ads1015.yaml   | 15 +++++++++++++--
> >  1 file changed, 13 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
> > index 2127d639a7683..e004659099c19 100644
> > --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
> > +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
> > @@ -78,9 +78,9 @@ patternProperties:
> >        ti,datarate:
> >          $ref: /schemas/types.yaml#/definitions/uint32
> >          minimum: 0
> > -        maximum: 6
> > +        maximum: 7
> >          description: |
> > -          Data acquisition rate in samples per second
> > +          Data acquisition rate in samples per second for ADS1015, TLA2024
> >            0: 128
> >            1: 250
> >            2: 490
> > @@ -88,6 +88,17 @@ patternProperties:
> >            4: 1600 (default)
> >            5: 2400
> >            6: 3300
> > +          7: 3300
> > +
> > +          Data acquisition rate in samples per second for ADS1115
> > +          0: 8
> > +          1: 16
> > +          2: 32
> > +          3: 64
> > +          4: 128 (default)
> > +          5: 250
> > +          6: 475
> > +          7: 860  
> 
> I'll leave this one to Rob or Krzysztof to ack/review, but this does
> seem like as good an opportunity as any to migrate to a property that
> allows you to put the actual data acquisition rate in & not have to add
> new key-value mappings to the binding to support devices with differing
> schemes.

I agree a value would have been better, but now we are where we are,
I'm not sure it's worth the churn of changing it - particularly as the
driver will need to support the old binding for every anyway.

Jonathan

> 
> >  
> >      required:
> >        - reg
> > -- 
> > 2.39.2
> >   
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux