сб, 17 июн. 2023 г. в 16:49, Jonathan Cameron <jic23@xxxxxxxxxx>: > > On Thu, 15 Jun 2023 23:55:20 +0300 > Maksim Kiselev <bigunclemax@xxxxxxxxx> wrote: > > > The General Purpose ADC (GPADC) can convert the external signal into > > a certain proportion of digital value, to realize the measurement of > > analog signal, which can be applied to power detection and key detection. > > > > Theoretically, this ADC can support up to 16 channels. All SoCs below > > contain this GPADC IP. The only difference between them is the number > > of available channels: > > > > T113 - 1 channel > > D1 - 2 channels > > R329 - 4 channels > > T507 - 4 channels > > > > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> > > Signed-off-by: Maksim Kiselev <bigunclemax@xxxxxxxxx> > > --- > > drivers/iio/adc/Kconfig | 10 ++ > > drivers/iio/adc/Makefile | 1 + > > drivers/iio/adc/sun20i-gpadc-iio.c | 276 +++++++++++++++++++++++++++++ > > 3 files changed, 287 insertions(+) > > create mode 100644 drivers/iio/adc/sun20i-gpadc-iio.c > > > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > > index eb2b09ef5d5b..deff7ae704ce 100644 > > --- a/drivers/iio/adc/Kconfig > > +++ b/drivers/iio/adc/Kconfig > > @@ -1123,6 +1123,16 @@ config SUN4I_GPADC > > To compile this driver as a module, choose M here: the module will be > > called sun4i-gpadc-iio. > > > > +config SUN20I_GPADC > > + tristate "Support for the Allwinner SoCs GPADC" > I applied this and started a build test before noticing that this Kconfig description > is very vague and matches the one for the existing 4i driver... Indeed. I must have forgotten to change this line when copying from sun4i... > The 'Support for the' bit also isn't appropriate for what you see in make menuconfig > menu etc. Please come up with something descriptive. Maybe > "sun20i and similar SoC GPADC"? > > Bonus points if you change the text for the 4i at the same time to be > more meaningful. I clearly missed that in review a long time ago! Should I do this in a separate patch?
