Linux IIO Development

• Thread Index

• [PATCH v2 2/4] hwmon: pmbus: Use devm_krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH v2 1/4] devres: Provide krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH v2 0/4] devres: Provide krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• Re: [PATCH v1 0/4] Update APDS990x ALS to support IIO
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] iio: adc: max11410: fix read_poll_timeout() usage
  • From: "Tilki, Ibrahim" <Ibrahim.Tilki@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhb
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindings: iio: light: add apds990x binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: adc: Use devm_krealloc_array
  • From: Michal Simek <michal.simek@xxxxxxx>
• [PATCH] iio: magn: bmc150: add a lower bounds in bmc150_magn_write_raw()
  • From: Dan Carpenter <error27@xxxxxxxxx>
• [PATCH v1 3/4] misc: apds990x: convert to IIO
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 4/4] iio: light: move apds990x into proper place
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 2/4] misc: adps990x: convert to OF
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 1/4] dt-bindings: iio: light: add apds990x binding
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v1 0/4] Update APDS990x ALS to support IIO
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• Re: [PATCH 7/8] ARM: dts: imx6ull: Add chargebyte Tarragon support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 7/8] ARM: dts: imx6ull: Add chargebyte Tarragon support
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH v6 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 4/5] dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v6 3/5] iio: adc: max77541: Add ADI MAX77541 ADC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v6 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v6 0/5] Add MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v6 1/5] dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• RE: [PATCH V5 09/15] spi: Add stacked and parallel memories support in SPI core
  • From: "Mahapatra, Amit Kumar" <amit.kumar-mahapatra@xxxxxxx>
• Re: [PATCH] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  • From: Masahiro Honda <honda@xxxxxxxxxxxxx>
• [PATCH] iio: adc: max11410: fix read_poll_timeout() usage
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhb
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: ad74413r: allow setting sink current for digital input
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 7/8] ARM: dts: imx6ull: Add chargebyte Tarragon support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/8] dt-bindings: ARM: fsl: Add chargebyte Tarragon
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: Add DS2482/DS2484 as trivial device
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: vendor-prefixes: add chargebyte
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH V5 01/15] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Bugs in dps310 Linux driver
  • From: "Andres Heinloo" <andres@xxxxxxxxxxxxxx>
• Re: [PATCH V5 09/15] spi: Add stacked and parallel memories support in SPI core
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 2/8] dt-bindings: Add DS2482/DS2484 as trivial device
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 8/8] ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH 4/8] dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH V5 13/15] spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 11/15] mtd: spi-nor: Add APIs to set/get nor->params
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• Re: [PATCH V5 01/15] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH V5 15/15] spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 05/15] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 12/15] mtd: spi-nor: Add stacked memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 14/15] mtd: spi-nor: Add parallel memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 03/15] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 10/15] mtd: spi-nor: Convert macros with inline functions
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 09/15] spi: Add stacked and parallel memories support in SPI core
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 08/15] ALSA: hda: cs35l41: Replace all spi->chip_select references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 06/15] platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 07/15] powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 6/8] dt-bindings: ARM: fsl: Add chargebyte Tarragon
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH 0/8] ARM: dts: imx6ull: Add chargebyte Tarragon support
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH 3/8] w1: ds2482: add i2c id for ds2484
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH 7/8] ARM: dts: imx6ull: Add chargebyte Tarragon support
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH V5 04/15] mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 1/8] dt-bindings: vendor-prefixes: add chargebyte
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH 5/8] iio: accel: add support for IIS328DQ variant
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH V5 02/15] net: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH V5 00/15] spi: Add support for stacked/parallel memories
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] hwmon: pmbus: Use devm_krealloc_array
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 4/4] serial: qcom_geni: Use devm_krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH 3/4] iio: adc: Use devm_krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH 2/4] hwmon: pmbus: Use devm_krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH 1/4] devres: Provide krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• [PATCH 0/4] devres: Provide krealloc_array
  • From: James Clark <james.clark@xxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v1 0/2] adding support for Microchip PAC193X Power Monitor
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v3 2/6] iio: light: Add gain-time-scale helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Support ROHM BU27034 ALS sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: light: Add gain-time-scale helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: light: Add gain-time-scale helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhb
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ASM330LHB
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] add support for ASM330LHB
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 2/2] iio: ad74413r: wire up support for drive-strength-microamp property
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: ad74413r: allow setting sink current for digital input
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: ad74413r: allow setting sink current for digital input
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 6/6] MAINTAINERS: Add ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 4/6] MAINTAINERS: Add IIO gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 3/6] iio: test: test gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 2/6] iio: light: Add gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: iio: light: Support ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 0/6] Support ROHM BU27034 ALS sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH] Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  • From: Masahiro Honda <honda@xxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• [PATCH v5 2/2] iio: temperature: Add MCP9600 thermocouple EMF converter
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• [PATCH v5 0/2] Add support for the MCP9600 thermocouple EMF converter
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: Bugs in dps310 Linux driver
  • From: "Andres Heinloo" <andres@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [low prio, just pondering] About the light sensor "sensitivity area"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: light: Add gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 2/2] iio: temperature: Add MCP9600 thermocouple EMF converter driver
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter bindings
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• Re: [RFC PATCH 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: light: Add gain-time-scale helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 0/5] Add TI TMP116 Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/5] iio: temperature: tmp117: improve fallback capabilities
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: addac: ad74413r: fix Current Input, Loop Powered Mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Bugs in dps310 Linux driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: Rename iio_trigger_poll_chained and add kernel-doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: temperature: tmp117: improve fallback capabilities
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: buffer: fix coding style warnings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter bindings
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/2] iio: temperature: Add MCP9600 thermocouple EMF converter driver
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: Add MCP9600 thermocouple EMF converter bindings
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 11/16] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/16] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 17/50] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 07/11] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/11] tools/iio/iio_utils:fix memory leak
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 09/16] tools/iio/iio_utils:fix memory leak
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 13/20] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 13/30] tools/iio/iio_utils:fix memory leak
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 06/11] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 12/20] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 14/30] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 11/20] tools/iio/iio_utils:fix memory leak
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 15/30] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 16/50] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 15/50] tools/iio/iio_utils:fix memory leak
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 20/60] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 19/60] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 17/60] tools/iio/iio_utils:fix memory leak
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.2 23/64] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.2 22/64] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.2 20/64] tools/iio/iio_utils:fix memory leak
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5 00/18] Self-encapsulate the thermal zone device structure
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: ad74413r: wire up support for drive-strength-microamp property
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 5/5] drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Bugs in dps310 Linux driver
  • From: "Andres Heinloo" <andres@xxxxxxxxxxxxxx>
• Re: [PATCH v5 00/18] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 2/6] iio: light: Add gain-time-scale helpers
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: light: Add gain-time-scale helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: ad74413r: allow setting sink current for digital input
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 0/2] iio: ad74413r: allow setting sink current for digital input
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: ad74413r: wire up support for drive-strength-microamp property
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: ad74413r: allow setting sink current for digital input
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 2/2] iio: Rename iio_trigger_poll_chained and add kernel-doc
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v2 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v2 0/2] iio: Add kernel-docs and rename iio_trigger_poll_chained
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v2 6/6] MAINTAINERS: Add ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 4/6] MAINTAINERS: Add IIO gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 3/6] iio: test: test gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 2/6] iio: light: Add gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: iio: light: Support ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 0/6] Support ROHM BU27034 ALS sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [RFC PATCH 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v5 04/18] thermal/core: Use the thermal zone 'devdata' accessor in remaining drivers
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v5 00/18] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: addac: ad74413r: fix Current Input, Loop Powered Mode
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v4 04/19] thermal/core: Use the thermal zone 'devdata' accessor in remaining drivers
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v4 00/19] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC PATCH 2/6] iio: light: Add gain-time-scale helpers
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: Add TI ADS1100 and ADS1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH 2/6] iio: light: Add gain-time-scale helpers
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/5] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 2/5] iio: temperature: tmp117: improve fallback capabilities
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 4/5] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 5/5] iio: temperature: tmp117: cosmetic alignment cleanup
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 3/5] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 1/5] dt-bindings: iio: ti,tmp117: fix documentation link
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v6 0/5] Add TI TMP116 Support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v5 4/5] iio: temperature: tmp117: add TI TMP116 support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 5/5] iio: temperature: tmp117: cosmetic alignment cleanup
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v5 1/5] dt-bindings: iio: ti,tmp117: fix documentation link
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v5 3/5] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v5 2/5] iio: temperature: tmp117: improve fallback capabilities
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v5 4/5] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v5 0/5] Add TI TMP116 Support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: temperature: tmp117: improve fallback capabilities
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: Rename iio_trigger_poll_chained and add kernel-doc
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH 1/2] iio: Improve the kernel-doc of iio_trigger_poll
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH 0/2] iio: Add kernel-doc and rename
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v2 2/2] iio: adc: Add TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v2] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 3/3] iio: buffer: fix coding style warnings
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 6/6] MAINTAINERS: Add ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 04/20] thermal/core: Use the thermal zone 'devdata' accessor in remaining drivers
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 04/20] thermal/core: Use the thermal zone 'devdata' accessor in remaining drivers
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v3 00/20] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: Improce kernel docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] iio: Add some kerneldoc for channel types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/6] Support ROHM BU27034 ALS sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 2/6] iio: light: Add gain-time-scale helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 6/6] MAINTAINERS: Add ROHM BU27034
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 1/6] dt-bindings: iio: light: Support ROHM BU27034
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 7/7] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/5] iio: temperature: tmp117: cosmetic alignment cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/5] iio: temperature: tmp117: improve fallback capabilities
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: light: cm32181: Unregister second I2C client if present
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for TI ADS1100 and ADS1000 chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for TI ADS1100 and ADS1000 chips
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 0/2] adding support for Microchip PAC193X Power Monitor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for TI ADS1100 and ADS1000 chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: meson_saradc: Better handle BL30 not releaseing the hardware
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 3/3] doc: Make sysfs-bus-iio doc more exact
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 2/3] iio: add documentation for iio_chan_info_enum
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 1/3] iio: Add some kerneldoc for channel types
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 0/3] iio: Improce kernel docs
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for TI ADS1100 and ADS1000 chips
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [low prio, just pondering] About the light sensor "sensitivity area"
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH] iio: Add some kerneldoc for channel types
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 00/17] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC PATCH] iio: Add some kerneldoc for channel types
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH] iio: Add some kerneldoc for channel types
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 00/17] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v3 00/17] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v5 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RFC PATCH 1/6] dt-bindings: iio: light: Support ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH 1/6] dt-bindings: iio: light: Support ROHM BU27034
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4] iio: light: cm32181: Unregister second I2C client if present
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC PATCH 1/6] dt-bindings: iio: light: Support ROHM BU27034
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v4] iio: light: cm32181: Unregister second I2C client if present
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v4] iio: proximity: sx_common: Add old register mapping
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2 01/16] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 01/16] thermal/core: Add a thermal zone 'devdata' accessor
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [RFC PATCH 1/6] dt-bindings: iio: light: Support ROHM BU27034
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] iio: light: cm32181: Unregister second I2C client if present
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3] iio: light: cm32181: Unregister second I2C client if present
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [RFC PATCH 6/6] MAINTAINERS: Add ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 5/6] iio: light: ROHM BU27034 Ambient Light Sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 4/6] MAINTAINERS: Add IIO gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 3/6] iio: test: test gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 2/6] iio: light: Add gain-time-scale helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH 1/6] dt-bindings: iio: light: Support ROHM BU27034
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [RFC PATCH 0/6] Support ROHM BU27034 ALS sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v13 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v13 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v13 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: cm32181: Unregister second I2C client if present
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v2 01/16] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• [PATCH v2 01/16] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v2 00/17] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: adc: max77541: Add ADI MAX77541 ADC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/5] dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 5/5] mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v5 4/5] dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v5 3/5] iio: adc: max77541: Add ADI MAX77541 ADC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v5 2/5] regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v5 1/5] dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v5 0/5] Add MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 2/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v4 2/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• RE: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: DLG Adam Ward <DLG-Adam.Ward.opensource@xxxxxxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: adc: adding support for pac193x
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v1 0/2] adding support for Microchip PAC193X Power Monitor
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v4 0/5] Add TI TMP116 Support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v4 3/5] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v4 2/5] iio: temperature: tmp117: improve fallback capabilities
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v4 4/5] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v4 5/5] iio: temperature: tmp117: cosmetic alignment cleanup
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: iio: ti,tmp117: fix documentation link
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
• RE: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: DLG Adam Ward <DLG-Adam.Ward.opensource@xxxxxxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: "Greenman, Gregory" <gregory.greenman@xxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: meson_saradc: Better handle BL30 not releaseing the hardware
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v2] iio: adc: meson_saradc: Better handle BL30 not releaseing the hardware
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v4 7/7] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 6/7] dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 5/7] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 4/7] iio: pressure: Kconfig: Delete misleading I2C reference on bmp280 title
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 3/7] iio: pressure: bmp280: Make read calibration callback optional
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 2/7] iio: pressure: bmp280: Add preinit callback
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 1/7] iio: pressure: bmp280: Use chip_info pointers for each chip as driver data
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 0/7] Add support for pressure sensor Bosch BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v1 00/17] Self-encapsulate the thermal zone device structure
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2] iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: accel: kionix-kx022a: Timestamp minor fix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7791: fix IRQ flags
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for TI ADS1100 and ADS1000 chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH v6 2/2] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: meson_saradc: Better handle BL30 not releaseing the hardware
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: buffer: make sure O_NONBLOCK is respected
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: buffer: correctly return bytes written in output buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH] iio: imu: adis16475: correct copy paste mistake in comment block
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: proximity: sx_common: Add old register mapping
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: accel: kionix-kx022a: Timestamp minor fix
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH 1/1] iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH 0/1] iio: accel: kionix-kx022a: Timestamp minor fix
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/1] iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/1] iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 1/1] iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH 0/1] iio: accel: kionix-kx022a: Timestamp minor fix
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RESEND PATCH v6 2/2] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [RESEND PATCH v6 1/2] iio: adc: axp20x_adc: Minor code cleanups
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for TI ADS1100 and ADS1000 chips
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add driver for TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add driver for TI ADS1100 and ADS1000
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for TI ADS1100 and ADS1000 chips
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: Add driver for TI ADS1100 and ADS1000 chips
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: Add driver for TI ADS1100 and ADS1000
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v3 1/4] dt-bindings: iio: ti,tmp117: fix documentation link
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] iio: temperature: tmp117: cosmetic alignment cleanup
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] Add TI TMP116 Support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add driver for TI ADS1100 and ADS1000
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v13 5/6] MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v13 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v13 3/6] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Questions: iio: accel: kionix-kx022a: timestamp when using the data-rdy trigger?
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH] iio: adc: meson_saradc: Better handle BL30 not releaseing the hardware
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: buffer: fix coding style warnings
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: buffer: make sure O_NONBLOCK is respected
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: buffer: correctly return bytes written in output buffers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 3/3] iio: buffer: fix coding style warnings
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 0/3] output buffer write fops fixes
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 1/3] iio: buffer: correctly return bytes written in output buffers
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 2/3] iio: buffer: make sure O_NONBLOCK is respected
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v4 01/15] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH] iio: adc: imx93: fix a signedness bug in imx93_adc_read_raw()
  • From: Bough Chen <haibo.chen@xxxxxxx>
• [PATCH] iio: adc: imx93: fix a signedness bug in imx93_adc_read_raw()
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: no answer after some iio_generic_buffer test cycles
  • From: Philippe De Muyter <phdm@xxxxxxx>
• [PATCH] iio: imu: adis16475: correct copy paste mistake in comment block
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: light: cm32181: Unregister second I2C client if present
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: no answer after some iio_generic_buffer test cycles
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: no answer after some iio_generic_buffer test cycles
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: harald@xxxxxxxxx
• Re: [PATCH] iio: frequency: adf4377: remove duplicate/repeating constant
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] iio: frequency: adf4377: remove duplicate/repeating constant
  • From: Deepak R Varma <drv@xxxxxxxxx>
• Re: [PATCH] iio: frequency: adf4377: remove duplicate/repeating constant
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: pelzi@xxxxxxxxxxxxxxx
• Re: [PATCH v3] iio: proximity: sx_common: Add old register mapping
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4] iio: proximity: sx_common: Add old register mapping
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 15/15] spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 14/15] mtd: spi-nor: Add parallel memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 12/15] mtd: spi-nor: Add stacked memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 11/15] mtd: spi-nor: Add APIs to set/get nor->params
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 13/15] spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 09/15] spi: Add stacked and parallel memories support in SPI core
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 10/15] mtd: spi-nor: Convert macros with inline functions
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 08/15] ALSA: hda: cs35l41: Replace all spi->chip_select references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 07/15] powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 06/15] platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 04/15] mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 05/15] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 02/15] net: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 03/15] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v4 00/15] spi: Add support for stacked/parallel memories
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• Re: [PATCH v3] iio: proximity: sx_common: Add old register mapping
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] staging: iio: meter: Drop ade7854 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/6] bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Philippe De Muyter <phdm@xxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: discard samples during filters settling time
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2] iio: light: cm32181: Unregister second I2C client if present
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: st_lsm6dsx : first two values of ism330dlc_gyro are wrong
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v3 4/6] bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: bus: add STM32 System Bus
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: harald@xxxxxxxxx
• Re: [PATCH v2] iio: temperature: Add MCP9600 thermocouple EMF converter driver
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• Re: [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: Harald Geyer <harald@xxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Unregister second I2C client if present
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: st_lsm6dsx : first two values of ism330dlc_gyro are wrong
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Unregister second I2C client if present
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: st_lsm6dsx : first two values of ism330dlc_gyro are wrong
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: st_lsm6dsx : first two values of ism330dlc_gyro are wrong
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7791: fix IRQ flags
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Unregister second I2C client if present
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] iio: light: cm32181: Unregister second I2C client if present
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH v3 5/7] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: pelzi@xxxxxxxxxxxxxxx
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: pelzi@xxxxxxxxxxxxxxx
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: st_lsm6dsx : first two values of ism330dlc_gyro are wrong
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: [PATCH v2] staging: iio: meter: Drop ade7854 driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: temperature: Add MCP9600 thermocouple EMF converter driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: sx_common: Drop documentation of non existent struct element.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: meter: Drop ade7854 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: thermal: qcom-spmi-adc-tm5: Use generic ADC node name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: dac: ad5592r: add gpio_chip names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: renesas,rcar-gyroadc: Miscellaneous improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: proximity: sx_common: Add old register mapping
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sps030: Reformat comment in a more readable way
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: kionix-kx022a: Remove the unused member g_range
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/7] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: st_lsm6dsx : first two values of ism330dlc_gyro are wrong
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• st_lsm6dsx : first two values of ism330dlc_gyro are wrong
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: thermal: qcom-spmi-adc-tm5: Use generic ADC node name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: treewide: add feature-domains description in binding files
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: iio dac drivers : imposing upper limit on value.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• iio dac drivers : imposing upper limit on value.
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: [PATCH] tree-wide: trivial: s/ a SPI/ an SPI/
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH] tree-wide: trivial: s/ a SPI/ an SPI/
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] tree-wide: trivial: s/ a SPI/ an SPI/
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] tree-wide: trivial: s/ a SPI/ an SPI/
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
• Re: [PATCH v12 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• RE: [PATCH v12 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v12 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PULL] IIO: 1st set of new device support etc for 6.3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: Harald Geyer <harald@xxxxxxxxx>
• [PULL] IIO: 1st set of new device support etc for 6.3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v12 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v12 3/6] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v12 5/6] MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adis16480: select CONFIG_CRC32
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• [PATCH v3 12/13] mtd: spi-nor: Add parallel memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 13/13] spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 11/13] spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 10/13] mtd: spi-nor: Add stacked memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 09/13] mtd: spi-nor: Add APIs to set/get nor->params
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 08/13] mtd: spi-nor: Convert macros with inline functions
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 07/13] spi: Add stacked and parallel memories support in SPI core
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 06/13] platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 04/13] mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 05/13] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 03/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 02/13] net: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v3 00/13] spi: Add support for stacked/parallel memories
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• Re: [PATCH v4 3/5] drivers: iio: adc: Add ADI MAX77541 ADC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: thermal: qcom-spmi-adc-tm5: Use generic ADC node name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: (subset) [PATCH v2 00/13] spi: Add support for stacked/parallel memories
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/5] dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 3/5] drivers: iio: adc: Add ADI MAX77541 ADC Support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 2/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH] drivers: iio: dac: ad5592r: add gpio_chip names
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: pelzi@xxxxxxxxxxxxxxx
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v4 5/5] drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v4 3/5] drivers: iio: adc: Add ADI MAX77541 ADC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v4 2/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v4 0/5] Add MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 0/2] iio: accel: kionix-kx022a: Minor fixes
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH v3 7/7] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• RE: [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH 0/2] iio: accel: kionix-kx022a: Minor fixes
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: kionix-kx022a: Fix the setting of regmap_config rd_table and wr_table
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v3] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• RE: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Cai Huoqing <cai.huoqing@xxxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: First set of Counter updates for the 6.3 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] First set of Counter updates for the 6.2 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] First set of Counter updates for the 6.2 cycle
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• First set of Counter updates for the 6.3 cycle
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PULL] First set of Counter updates for the 6.2 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] First set of Counter updates for the 6.2 cycle
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PULL] First set of Counter updates for the 6.2 cycle
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH] iio: adis16480: select CONFIG_CRC32
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: harald@xxxxxxxxx
• [PATCH 1/1] dt-bindings: iio: adc: add missing vref-supply
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: renesas,rcar-gyroadc: Miscellaneous improvements
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: harald@xxxxxxxxx
• Re: [PULL] IIO fixes for 6.2 - set 1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: adis16480: select CONFIG_CRC32
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PULL] First set of Counter updates for the 6.2 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• [PULL] First set of Counter updates for the 6.2 cycle
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: Andreas Feldner <pelzi@xxxxxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• [PATCH 2/2] iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-C
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/2] iio: imu: lsx6dsx: support SMO8B30 ACPI ID.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: proximity: sx_common: Add old register mapping
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>