The following changes since commit fe15c26ee26efa11741a7b632e9f23b01aca4cc6: Linux 6.3-rc1 (2023-03-05 14:52:03 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.4a for you to fetch changes up to c86b0e73f0bebbb0245ef2bac4cf269d61ff828c: MAINTAINERS: Add ROHM BU27034 (2023-04-10 12:26:35 +0100) ---------------------------------------------------------------- 1st set of IIO new device support, features and cleanups for the 6.4 cycle. New device support * bosch,bmp280 - Add support for BMP580 - includes significant refactoring and general driver cleanup + support for non-volatile memory for trimming and config parameters. * rohm BU27034 - New driver for this 3 channel ambient light sensor. - New support library for devices where both integration time and amplifier gain are configurable. In these cases a scale change may require changing bother underlying values. This library module provides code to help with this. * st,accel - Add support for IIS328DQ (ID only as compatible wtih LIS331DL) * st,lsm6dsx - Add support for ASM330LHB automotive MEMS sensor. * ti,ads1100, ads1000 - New driver for these 16 bit ADCs. * ti,tmp117 - Add support for older tmp116 device. Includes some general driver cleanup. Staging driver drops * adi,ade7854 - Driver was a very long way from compliant with IIO infrastructure and ABI. If anyone wants a non staging version of this driver they are better off starting from scratch. Hence drop it and the associated meter.h header. Features * adi,ad7441r - Add DT binding to set sink current for digital input. * semtech,sx9324,9360 - Support older register mapping from firmware designed for windows. Core improvements. * Move iio_trigger_poll() docs to next to the implementation and add a note on expected caller context. * Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so as to use more standard / common terminology. * Improve main ABI docs references to offset and scale for raw values by making them consistent and clear. Cleanups and minor fixes: * adi,ad5592r - Add GPIO names - useful for debug. * adi,ad7441r - Fix current input, loop powered mode configuration setup. * adi,adis16475 - Fix wrong commented value for minimum advised lower rate. * adi,admv1013 - Use devm_clk_get_enabled() to reduce boilerplate. * adi,ads1210 - Fix wrong bits for writing config register (late fix and has been broken a long time so not rushed upstream) * amlogic,meson-saradc - Improve cleanup in error handling if BL30 handshake fails. * apex-embedded,stx104 - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle retries. - Add local mutex to close various races. - Use define U16_MAX rather than value for limit. - Improve code readability with minor reorganization. * atmel,ad91-sama5d2 - Drop trivial dead code. * kionix,kx022a - Drop unused structure element. * linear,ltc2983 - Reorganize bindings doc to enable unevaluatedProperties to be set in one place for all child nodes. - Make binding for adi,custom-thermocouple accept signed values. * maxim,max44000 - Add OF Device matching (of_match_table was not correctly set). * maxim,max5522 - Missing static * measurement-computing,cio-dac - Fix wrong part name in comments. - Migrate to regmap. - Improve includes by replacing bitops.h with more direct bits.h * qcom,pm8xxx-xoadc - Remove a check that can never fail. * renesas,rcar-gyroadc - DT binding documentation improvements. - Tidy up an unused warning with __maybe_unused. * semtech,sx_common - Drop docs for a structure element that doesn't exist. * semtech,sx9500 - Drop ACPI_PTR() and of_match_ptr() protections that just complicate the code / block some firmware registration types that would otherwise work. * sensiron,sps30 - Comment formatting tidy up. * st,sensors - Drop duplicate text in DT binding. * st,stm32-adc - Add some missing static markings. * ti,ads1100 - Use correct return code in dev_err_probe() call. * x-powers,axp20x_adc - precursor series to simplify addition of AXP192. - General code cleanup / minor refactoring for better readabilty of code. - Switch from boolean value to mask for adc_en2 field to avoid hard coding a mask that will be different in AXP192 ---------------------------------------------------------------- Aidan MacDonald (2): iio: adc: axp20x_adc: Minor code cleanups iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field Angel Iglesias (7): iio: pressure: bmp280: Use chip_info pointers for each chip as driver data iio: pressure: bmp280: Add preinit callback iio: pressure: bmp280: Make read calibration callback optional iio: pressure: Kconfig: Delete misleading I2C reference on bmp280 title iio: pressure: bmp280: Add support for new sensor BMP580 dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string iio: pressure: bmp280: Add nvmem operations for BMP580 Antoniu Miclaus (1): drivers: iio: dac: ad5592r: add gpio_chip names Cheng Ziqiu (1): iio: adc: at91-sama5d2_adc: remove dead code in at91_adc_probe() Dan Carpenter (1): iio: adc: ti-ads1100: fix error code in probe() Geert Uytterhoeven (1): dt-bindings: iio: adc: renesas,rcar-gyroadc: Miscellaneous improvements Gwendal Grignou (1): iio: proximity: sx_common: Add old register mapping Jonathan Cameron (2): iio: proximity: sx_common: Drop documentation of non existent struct element. staging: iio: meter: Drop ade7854 driver Jonathan Neuschäfer (1): iio: chemical: sps030: Reformat comment in a more readable way Kasumov Ruslan (1): iio: adc: qcom-pm8xxx-xoadc: Remove useless condition in pm8xxx_xoadc_parse_channel() Krzysztof Kozlowski (3): iio: adc: rcar-gyroadc: mark OF related data as maybe unused iio: light: max44009: add missing OF device matching iio: proximity: sx9500: Reference ACPI and OF ID data Linus Walleij (1): dt-bindings: iio: st-sensors: Fix repeated text Lorenzo Bianconi (3): iio: imu: st_lsm6dsx: discard samples during filters settling time iio: imu: st_lsm6dsx: add support to ASM330LHB dt-bindings: iio: imu: st_lsm6dsx: add asm330lhb Marco Felsch (5): dt-bindings: iio: ti,tmp117: fix documentation link iio: temperature: tmp117: improve fallback capabilities dt-bindings: iio: ti,tmp117: add binding for the TMP116 iio: temperature: tmp117: add TI TMP116 support iio: temperature: tmp117: cosmetic alignment cleanup Matti Vaittinen (6): doc: Make sysfs-bus-iio doc more exact iio: light: Add gain-time-scale helpers MAINTAINERS: Add IIO gain-time-scale helpers dt-bindings: iio: light: Support ROHM BU27034 iio: light: ROHM BU27034 Ambient Light Sensor MAINTAINERS: Add ROHM BU27034 Mehdi Djait (3): iio: accel: kionix-kx022a: Remove the unused member g_range iio: Improve the kernel-doc of iio_trigger_poll iio: Rename iio_trigger_poll_chained and add kernel-doc Mike Looijmans (2): dt-bindings: iio: adc: Add TI ADS1100 and ADS1000 iio: adc: Add TI ADS1100 and ADS1000 Nuno Sá (2): iio: imu: adis16475: correct copy paste mistake in comment block staging: iio: resolver: ads1210: fix config mode Rasmus Villemoes (3): dt-bindings: iio: ad74413r: allow setting sink current for digital input iio: ad74413r: wire up support for drive-strength-microamp property iio: addac: ad74413r: fix Current Input, Loop Powered Mode Rob Herring (2): dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed Stefan Wahren (2): dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer iio: accel: add support for IIS328DQ variant Tom Rix (2): iio: adc: stm32-adc: set some stm32-adc.c variables storage-class-specifier to static iio: dac: set variable max5522_channels storage-class-specifier to static Uwe Kleine-König (2): iio: adc: meson_saradc: Better handle BL30 not releasing the hardware iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify William Breathitt Gray (9): iio: dac: cio-dac: Fix typo in comment listing supported devices iio: dac: cio-dac: Migrate to the regmap API iio: addac: stx104: Replace bitops.h header inclusion with bits.h iio: addac: stx104: Fix race condition for stx104_write_raw() iio: addac: stx104: Fix race condition when converting analog-to-digital iio: addac: stx104: Use define rather than hardcoded limit for write val iio: addac: stx104: Improve indentation in stx104_write_raw() iio: addac: stx104: Migrate to the regmap API iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll Documentation/ABI/testing/sysfs-bus-iio | 13 +- .../bindings/iio/adc/renesas,rcar-gyroadc.yaml | 60 +- .../devicetree/bindings/iio/adc/ti,ads1100.yaml | 46 + .../bindings/iio/addac/adi,ad74413r.yaml | 9 + .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 3 + .../bindings/iio/light/rohm,bu27034.yaml | 46 + .../devicetree/bindings/iio/pressure/bmp085.yaml | 2 + .../devicetree/bindings/iio/st,st-sensors.yaml | 6 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 67 +- .../bindings/iio/temperature/ti,tmp117.yaml | 8 +- MAINTAINERS | 13 + drivers/iio/Kconfig | 3 + drivers/iio/Makefile | 1 + drivers/iio/accel/bma400_core.c | 2 +- drivers/iio/accel/kionix-kx022a.c | 3 +- drivers/iio/accel/mma8452.c | 2 +- drivers/iio/accel/msa311.c | 2 +- drivers/iio/accel/st_accel.h | 1 + drivers/iio/accel/st_accel_core.c | 1 + drivers/iio/accel/st_accel_i2c.c | 5 + drivers/iio/accel/st_accel_spi.c | 5 + drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad7606.c | 2 +- drivers/iio/adc/at91-sama5d2_adc.c | 8 +- drivers/iio/adc/axp20x_adc.c | 77 +- drivers/iio/adc/max11410.c | 2 +- drivers/iio/adc/meson_saradc.c | 21 +- drivers/iio/adc/qcom-pm8xxx-xoadc.c | 2 +- drivers/iio/adc/rcar-gyroadc.c | 2 +- drivers/iio/adc/stm32-adc.c | 6 +- drivers/iio/adc/ti-ads1100.c | 445 ++++++ drivers/iio/addac/Kconfig | 2 + drivers/iio/addac/ad74413r.c | 44 +- drivers/iio/addac/stx104.c | 462 +++--- drivers/iio/chemical/sps30_i2c.c | 6 +- drivers/iio/common/st_sensors/st_sensors_trigger.c | 4 +- drivers/iio/dac/Kconfig | 1 + drivers/iio/dac/ad5592r-base.c | 5 + drivers/iio/dac/cio-dac.c | 68 +- drivers/iio/dac/max5522.c | 2 +- drivers/iio/frequency/admv1013.c | 21 +- drivers/iio/gyro/fxas21002c_core.c | 2 +- drivers/iio/gyro/mpu3050-core.c | 2 +- drivers/iio/humidity/hts221_buffer.c | 2 +- drivers/iio/imu/adis16475.c | 6 +- drivers/iio/imu/st_lsm6dsx/Kconfig | 4 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 13 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 59 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 22 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 + drivers/iio/industrialio-gts-helper.c | 1077 ++++++++++++++ drivers/iio/industrialio-trigger.c | 17 +- drivers/iio/light/Kconfig | 14 + drivers/iio/light/Makefile | 1 + drivers/iio/light/acpi-als.c | 2 +- drivers/iio/light/max44009.c | 13 +- drivers/iio/light/rohm-bu27034.c | 1497 ++++++++++++++++++++ drivers/iio/light/rpr0521.c | 2 +- drivers/iio/light/st_uvis25_core.c | 2 +- drivers/iio/light/vcnl4000.c | 2 +- drivers/iio/light/vcnl4035.c | 2 +- drivers/iio/potentiostat/lmp91000.c | 2 +- drivers/iio/pressure/Kconfig | 6 +- drivers/iio/pressure/bmp280-core.c | 765 +++++++--- drivers/iio/pressure/bmp280-i2c.c | 45 +- drivers/iio/pressure/bmp280-regmap.c | 60 + drivers/iio/pressure/bmp280-spi.c | 47 +- drivers/iio/pressure/bmp280.h | 273 +++- drivers/iio/pressure/zpa2326.c | 2 +- drivers/iio/proximity/as3935.c | 2 +- drivers/iio/proximity/sx9324.c | 96 +- drivers/iio/proximity/sx9360.c | 32 +- drivers/iio/proximity/sx9500.c | 4 +- drivers/iio/proximity/sx_common.c | 21 + drivers/iio/proximity/sx_common.h | 6 +- drivers/iio/temperature/tmp117.c | 80 +- drivers/iio/trigger/iio-trig-loop.c | 2 +- drivers/staging/iio/Kconfig | 1 - drivers/staging/iio/Makefile | 1 - drivers/staging/iio/meter/Kconfig | 37 - drivers/staging/iio/meter/Makefile | 8 - drivers/staging/iio/meter/ade7854-i2c.c | 153 -- drivers/staging/iio/meter/ade7854-spi.c | 160 --- drivers/staging/iio/meter/ade7854.c | 556 -------- drivers/staging/iio/meter/ade7854.h | 173 --- drivers/staging/iio/meter/meter.h | 398 ------ drivers/staging/iio/resolver/ad2s1210.c | 2 +- include/linux/iio/iio-gts-helper.h | 206 +++ include/linux/iio/trigger.h | 8 +- 91 files changed, 5146 insertions(+), 2238 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml create mode 100644 drivers/iio/adc/ti-ads1100.c create mode 100644 drivers/iio/industrialio-gts-helper.c create mode 100644 drivers/iio/light/rohm-bu27034.c delete mode 100644 drivers/staging/iio/meter/Kconfig delete mode 100644 drivers/staging/iio/meter/Makefile delete mode 100644 drivers/staging/iio/meter/ade7854-i2c.c delete mode 100644 drivers/staging/iio/meter/ade7854-spi.c delete mode 100644 drivers/staging/iio/meter/ade7854.c delete mode 100644 drivers/staging/iio/meter/ade7854.h delete mode 100644 drivers/staging/iio/meter/meter.h create mode 100644 include/linux/iio/iio-gts-helper.h
