Linux IIO Development

• Thread Index

• Re: [PATCH] dt-bindings: iio: adc: renesas,rcar-gyroadc: Miscellaneous improvements
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: harald@xxxxxxxxx
• Re: [PULL] IIO fixes for 6.2 - set 1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: adis16480: select CONFIG_CRC32
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PULL] First set of Counter updates for the 6.2 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• [PULL] First set of Counter updates for the 6.2 cycle
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• [PATCH 1/2] iio: dht11: forked a driver version that polls sensor's signal from GPIO
  • From: Andreas Feldner <pelzi@xxxxxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• [PATCH 2/2] iio: imu: lsm6dsx: Add ACPI mount matrix retrieval
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-C
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/2] iio: imu: lsx6dsx: support SMO8B30 ACPI ID.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: proximity: sx_common: Add old register mapping
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: ROHM ALS, integration time
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: ROHM ALS, integration time
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 0/7] Add support for pressure sensor Bosch BMP580
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/7] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• ROHM ALS, integration time
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH] iio: adc: ad7791: fix IRQ flags
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: kionix-kx022a: Remove the unused member g_range
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 0/2] iio: accel: kionix-kx022a: Minor fixes
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: kionix-kx022a: Fix the setting of regmap_config rd_table and wr_table
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: EXT: Re: [PATCH] drivers: iio: adc: ltc2497: fix LSB shift
  • From: Ian Ray <ian.ray@xxxxxx>
• Fwd: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Darrell Kavanagh <darrell.kavanagh@xxxxxxxxx>
• [PATCH] iio: dht11: Read bit stream from IRQ on falling edges only
  • From: Andreas Feldner <pelzi@xxxxxxxxxxxxxxx>
• Re: Bug#1029850: linux: Driver not loaded for ST Microelectronics LSM6DS3TR-C accelerometer (acpi:SMO8B30:SMO8B30:)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] staging: iio: meter: Drop ade7854 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: meter: Drop ade7854 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] staging: iio: meter: Drop ade7854 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 11/12] staging: iio: accel: adis16203: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 10/12] staging: iio: accel: adis16203: Trivial style cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 08/12] staging: iio: accel: adis16203: Trivial whitespace cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 09/12] staging: iio: accel: adis16203: Drop setting drvdata as nothing gets it
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 07/12] staging: iio: accel: adis16203: Make units explicit in name of delay define
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 06/12] staging: iio: accel: adis16203: Drop driver name define
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 05/12] staging: iio: accel: adis16203: Simplify handling of calibbias
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 04/12] staging: iio: accel: adis16203: Drop the 180 degree offset channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 03/12] staging: iio: accel: adis16203: Rename incli channel registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 02/12] staging: iio: accel: adis16203: Drop excessive register comments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 00/12] staging: iio: accel: adis16203 Inclinometer cleanup and graduation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 01/12] staging: iio: accel: adis16203: More conventional header ordering
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: accel: kionix-kx022a: Remove the unused member g_range
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH 1/2] iio: accel: kionix-kx022a: Fix the setting of regmap_config rd_table and wr_table
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH 0/2] iio: accel: kionix-kx022a: Minor fixes
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH] iio: chemical: sps030: Reformat comment in a more readable way
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• [PATCH v3 7/7] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v3 6/7] dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v3 5/7] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v3 4/7] iio: pressure: Kconfig: Delete misleading I2C reference on bmp280 title
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v3 3/7] iio: pressure: bmp280: Make read calibration callback optional
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v3 2/7] iio: pressure: bmp280: Add preinit callback
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v3 1/7] iio: pressure: bmp280: Use chip_info pointers for each chip as driver data
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v3 0/7] Add support for pressure sensor Bosch BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v3] iio: proximity: sx_common: Add old register mapping
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix indentation error by adding extra spaces
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: dac: ad5592r: add gpio_chip names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: Fix indentation error by adding extra spaces
  • From: Anup Sharma <anupnewsmail@xxxxxxxxx>
• Re: [PATCH] drivers: iio: adc: ltc2497: fix LSB shift
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for AMS TCS3490 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio/proximity: semtech,sx9360: Fix 'semtech,resolution' type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: fix spdx format
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][next] iio: adc: imx93: Fix spelling mistake "geting" -> "getting"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: drop unneeded quotes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/6] bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: bus: add STM32 System Bus
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: treewide: add feature-domains description in binding files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: adc: ltc2497: fix LSB shift
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 0/6] Introduce STM32 system bus
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: Document common device controller bindings
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: Document common device controller bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 5/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 3/6] dt-bindings: bus: add STM32 System Bus
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: Document common device controller bindings
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: treewide: add feature-domains description in binding files
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 4/6] bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH] drivers: iio: adc: ltc2497: fix LSB shift
  • From: Ian Ray <ian.ray@xxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for AMS TCS3490 light sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for AMS TCS3490 light sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for AMS TCS3490 light sensor
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
  • From: Harshit Mogalapalli <harshit.m.mogalapalli@xxxxxxxxxx>
• [PATCH] iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
  • From: Harshit Mogalapalli <harshit.m.mogalapalli@xxxxxxxxxx>
• Re: [PATCH v6 3/3] arm64: dts: imx93: add ADC support
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH] dt-bindings: iio/proximity: semtech,sx9360: Fix 'semtech,resolution' type
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• [PATCH] iio: imu: fix spdx format
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: tcs3490: Add bindings for AMS TCS3490 light sensor
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add support for AMS TCS3490 light sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH][next] iio: adc: imx93: Fix spelling mistake "geting" -> "getting"
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH 11/12] staging: iio: accel: adis16203: Move out of staging
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 5/5] dt-bindings: iio: cleanup examples - indentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/5] dt-bindings: iio: use lowercase hex in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: iio: correct node names in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: iio: minor whitespace cleanups
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: iio: drop unneeded quotes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: iio: correct node names in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: drop unneeded quotes
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/2] iio: light: Add support for AMS TCS3490 light sensor
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: tcs3490: Add bindings for AMS TCS3490 light sensor
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 0/2] Add a driver for AMS TCS3490 light sensor
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 12/12] dt-bindings: iio: accel: Add ADIS16203 Inclinometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 11/12] staging: iio: accel: adis16203: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/12] staging: iio: accel: adis16203: Trivial style cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 09/12] staging: iio: accel: adis16203: Drop setting drvdata as nothing gets it
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 07/12] staging: iio: accel: adis16203: Make units explicit in name of delay define
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/12] staging: iio: accel: adis16203: Drop the 180 degree offset channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/12] staging: iio: accel: adis16203: Drop driver name define
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 05/12] staging: iio: accel: adis16203: Simplify handling of calibbias
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 08/12] staging: iio: accel: adis16203: Trivial whitespace cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 03/12] staging: iio: accel: adis16203: Rename incli channel registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/12] staging: iio: accel: adis16203: Drop excessive register comments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 00/12] staging: iio: accel: adis16203 Inclinometer cleanup and graduation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 01/12] staging: iio: accel: adis16203: More conventional header ordering
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: iio: cleanup examples - indentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: iio: correct node names in examples
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: iio: use lowercase hex in examples
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: iio: correct node names in examples
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: iio: minor whitespace cleanups
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: drop unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PULL] IIO fixes for 6.2 - set 1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Cédric Le Goater <clg@xxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Dhruva Gole <d-gole@xxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: Maxim max5522 DAC
  • From: Angelo Dureghello <angelo.dureghello@xxxxxxxxxxx>
• Re: [PATCH v2 07/13] platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 06/13] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 05/13] mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 04/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 03/13] net: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 01/13] spi: Add APIs in spi core to set/get spi->chip_select and spi->cs_gpiod
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 10/13] mtd: spi-nor: Add stacked memories support in spi-nor
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v2 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: iio: adc: Add NXP IMX93 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] iio: adc: add imx93 adc support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: iio: correct node names in examples
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v2 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: iio: correct node names in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 0/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/4] iio: imu: fxos8700: fix bugs about ODR and changes for a good readability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: Maxim max5522 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] drivers: iio: adc: Add ADI MAX77541 ADC Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] tools/iio/iio_utils:fix memory leak
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: iio: correct node names in examples
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7791: fix IRQ flags
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: drop unneeded quotes
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: iio: cleanup examples - indentation
  • From: Alexandru Lazar <alazar@xxxxxxxxxxxxx>
• [PATCH] iio: adc: ad7791: fix IRQ flags
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2 06/13] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: xilinx-ams: Convert to use fwnode_device_is_compatible()
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: drop unneeded quotes
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: adc: xilinx-ams: Convert to use fwnode_device_is_compatible()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: Require generic adc-chan name for channel nodes
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] arm64: dts: qcom: Use labels with generic node names for ADC channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: drop unneeded quotes
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
• [PATCH v2 12/13] mtd: spi-nor: Add parallel memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 10/13] mtd: spi-nor: Add stacked memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 13/13] spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 11/13] spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 09/13] mtd: spi-nor: Add APIs to set/get nor->params
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 08/13] spi: Add stacked and parallel memories support in SPI core
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 07/13] platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 05/13] mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 06/13] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 04/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 03/13] net: Replace all spi->chip_select and spi->cs_gpiod references with function call
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 01/13] spi: Add APIs in spi core to set/get spi->chip_select and spi->cs_gpiod
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH v2 00/13] spi: Add support for stacked/parallel memories
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• Re: [PATCH v6 4/7] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/5] drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v6 3/7] mfd: mp2629: introduce chip id machanism to distinguish chip
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 1/7] mfd: mp2629: fix failed to get iio channel by device name
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/5] drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1 1/2] iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: proximity: sx_common: Drop documentation of non existent struct element.
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 2/5] dt-bindings: iio: minor whitespace cleanups
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/5] dt-bindings: iio: use lowercase hex in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/5] dt-bindings: iio: drop unneeded quotes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/5] dt-bindings: iio: correct node names in examples
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 5/5] dt-bindings: iio: cleanup examples - indentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: addac: adi,74115: Add missing maxItems
  • From: Michał Grzelak <mchl.grzlk@xxxxxxxxx>
• Re: [RFC PATCH v2 1/5] iio: core: Point users of extend_name field to read_label callback
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] iio: core: Point users of extend_name field to read_label callback
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] iio: core: Point users of extend_name field to read_label callback
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] iio: core: Point users of extend_name field to read_label callback
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 0/3] add imx93 adc support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: frequency: ad9832: Replace macro AD9832_PHASE() with function
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] staging: iio: frequency: ad9832: Replace macro AD9832_PHASE() with function
  • From: Dan Carpenter <error27@xxxxxxxxx>
• [PATCH] staging: iio: frequency: ad9832: Replace macro AD9832_PHASE() with function
  • From: Brent Pappas <bpappas@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter: fix dependency references for config MICROCHIP_TCB_CAPTURE
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3] HID: Recognize sensors with application collections
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/5] drivers: iio: adc: Add ADI MAX77541 ADC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] iio: core: Replace iio_sysfs_match_string_with_gaps() by __sysfs_match_string()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: core: Sort headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] counter: fix dependency references for config MICROCHIP_TCB_CAPTURE
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 2/4] iio: imu: fxos8700: fix failed initialization ODR mode assignment
  • From: carlos.song@xxxxxxx
• [PATCH v5 1/4] iio: imu: fxos8700: fix incorrect ODR mode readback
  • From: carlos.song@xxxxxxx
• [PATCH v5 4/4] iio: imu: fxos8700: fix MAGN sensor scale and unit
  • From: carlos.song@xxxxxxx
• [PATCH v5 3/4] iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
  • From: carlos.song@xxxxxxx
• [PATCH v5 0/4] iio: imu: fxos8700: fix bugs about ODR and changes for a good readability
  • From: carlos.song@xxxxxxx
• [PATCH v3 5/5] drivers: iio: adc: Add ADI MAX77541 ADC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v3 4/5] dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v3 3/5] drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v3 2/5] dt-bindings: mfd: Add ADI MAX77541/MAX77540
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v3 1/5] drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v3 0/5] Add MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: addac: adi,74115: Add missing maxItems
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v5 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v5 2/3] iio: light: vcnl4000: Make irq handling more generic
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v5 1/3] iio: light: vcnl4000: Prepare for more generic setup
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v4 2/3] iio: light: vcnl4000: Make irq handling more generic
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v4 1/3] iio: light: vcnl4000: Prepare for more generic setup
  • From: Marten Lindahl <martenli@xxxxxxxx>
• [PATCH] iio: light: cm32181: Fix PM support on system with 2 I2C resources
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: light: vcnl4000: Make irq handling more generic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: light: vcnl4000: Prepare for more generic setup
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v4 2/3] iio: light: vcnl4000: Make irq handling more generic
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v4 1/3] iio: light: vcnl4000: Prepare for more generic setup
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v4 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Wahaj <wahajaved@xxxxxxxxxxxxxx>
• [PATCH v6 2/3] dt-bindings: iio: adc: Add NXP IMX93 ADC
  • From: haibo.chen@xxxxxxx
• [PATCH v6 3/3] arm64: dts: imx93: add ADC support
  • From: haibo.chen@xxxxxxx
• [PATCH v6 1/3] iio: adc: add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH v6 0/3] add imx93 adc support
  • From: haibo.chen@xxxxxxx
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• RE: [PATCH v5 1/3] iio: adc: add imx93 adc support
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v3 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/1] iio: adc: qcom-spmi-adc5: Fix the channel name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v5 0/3] add imx93 adc support
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v3 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3] tools/iio/iio_utils:fix memory leak
  • From: Yulong Zhang <yulong.zhang@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v3 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v3 2/3] iio: light: vcnl4000: Make irq handling more generic
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: Maxim max5522 DAC
  • From: Angelo Dureghello <angelo.dureghello@xxxxxxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Wahaj <wahajaved@xxxxxxxxxxxxxx>
• [RFC PATCH v2 2/5] iio: adc: qcom-spmi-adc5: Use driver datasheet_name instead of DT label
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [RFC PATCH v2 3/5] iio: adc: qcom-spmi-adc5: Fall back to datasheet_name instead of fwnode name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [RFC PATCH v2 0/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [RFC PATCH v2 4/5] iio: adc: qcom-spmi-adc5: Remove unnecessary datasheet_name NULL check
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [RFC PATCH v2 1/5] iio: core: Point users of extend_name field to read_label callback
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [RFC PATCH v2 5/5] iio: adc: qcom-spmi-vadc: Propagate fw node label to userspace
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] iio: adc: qcom-spmi-vadc: Propagate fw node name/label to extend_name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v3 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: sx_common: Add old register mapping
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: add oversampling support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2] tools/iio/iio_utils:fix memory leak
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Wahaj <wahajaved@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
  • From: Philippe De Muyter <Philippe.DeMuyter@xxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c.
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 1/2] iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c.
  • From: Philippe De Muyter <Philippe.DeMuyter@xxxxxxx>
• [PATCH v2 0/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
  • From: Philippe De Muyter <Philippe.DeMuyter@xxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Wahaj <wahajaved@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: fix naming of 'struct iio_info'.
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 2/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
  • From: Philippe De Muyter <Philippe.DeMuyter@xxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: fix naming of 'struct iio_info'.
  • From: Philippe De Muyter <Philippe.DeMuyter@xxxxxxx>
• [PATCH 0/2] iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
  • From: Philippe De Muyter <Philippe.DeMuyter@xxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: stm32: add oversampling support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] tools/iio/iio_utils:fix memory leak
  • From: Yulong Zhang <yulong.zhang@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: Maxim max5522 DAC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: sx_common: Add old register mapping
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH v3 2/3] iio: light: vcnl4000: Make irq handling more generic
  • From: andriy.shechenko@xxxxxxxxxxxxx
• Re: [PATCH v3 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: andriy.shechenko@xxxxxxxxxxxxx
• [PATCH] dt-bindings: iio: dac: Maxim max5522 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v4 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v4 0/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v2 5/5] drivers: iio: adc: Add MAX77541 ADC Support
  • From: "Sahin, Okan" <Okan.Sahin@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: addac: adi,74115: Add missing maxItems
  • From: Michał Grzelak <mchl.grzlk@xxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v4 2/4] iio: imu: fxos8700: fix failed initialization ODR mode assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH v4 1/4] iio: imu: fxos8700: fix incorrect ODR mode readback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: proximity: sx_common: Drop documentation of non existent struct element.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: sx_common: Add old register mapping
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools/iio/iio_utils:fix memory leak
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio: hid: fix the retval in gyro_3d_capture_sample
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid: fix the retval in accel_3d_capture_sample
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: chemical: scd30_core: Switch to use dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: chemical: scd30_core: use sysfs_emit() to instead of scnprintf()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [lvc-project] [PATCH] iio: chemical: scd30: Add check for NULL in scd30_i2c_command
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/4] counter: microchip: Add appropriate arch deps for TCP driver
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH 3/4] counter: FTM quad: Depend on the Layerscape SoC
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH 2/4] counter: intel: Depend on X86
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v3 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v3 0/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH 1/4] counter: Sort the Kconfig entries alphabetically
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [lvc-project] [PATCH] iio: chemical: scd30: Add check for NULL in scd30_i2c_command
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [lvc-project] [PATCH] iio: chemical: scd30: Add check for NULL in scd30_i2c_command
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [lvc-project] [PATCH] iio: chemical: scd30: Add check for NULL in scd30_i2c_command
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• [PATCH v11 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v11 3/6] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v11 5/6] MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: sysfs mount_matrix for st_lsm6dsx gyro
  • From: Philippe De Muyter <phdm@xxxxxxx>
• [PATCH v1 1/1] iio: chemical: scd30_core: Switch to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v1 1/1] iio: chemical: scd30_core: use sysfs_emit() to instead of scnprintf()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: chemical: scd30: Add check for NULL in scd30_i2c_command
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: chemical: scd30: Add check for NULL in scd30_i2c_command
  • From: Anastasia Belova <abelova@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v2] iio: temperature: Add MCP9600 thermocouple EMF converter driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: sysfs mount_matrix for st_lsm6dsx gyro
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: sysfs mount_matrix for st_lsm6dsx gyro
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: sysfs mount_matrix for st_lsm6dsx gyro
  • From: Philippe De Muyter <phdm@xxxxxxx>
• [PATCH] tools/iio/iio_utils:fix memory leak
  • From: Yulong Zhang <yulong.zhang@xxxxxxxxxx>
• RE: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: "Contact Bosch-Sensortec (BST/SA)" <Bosch-Sensortec.Contact@xxxxxxxxxxxxxxxxxxx>
• Re: sysfs mount_matrix for st_lsm6dsx gyro
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: Re: BMI0160/260 conflicts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: sysfs mount_matrix for st_lsm6dsx gyro
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: (subset) [PATCH 0/2] Support ADC5_BAT_ID_100K_PU and use on PM7250b
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: sx_common: Add old register mapping
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: sysfs mount_matrix for st_lsm6dsx gyro
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3] HID: Recognize sensors with application collections
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• iio: hid: fix the retval in gyro_3d_capture_sample
  • From: Dmitry Perchanov <dmitry.perchanov@xxxxxxxxx>
• [PATCH] iio: hid: fix the retval in accel_3d_capture_sample
  • From: Dmitry Perchanov <dmitry.perchanov@xxxxxxxxx>
• sysfs mount_matrix for st_lsm6dsx gyro
  • From: Philippe De Muyter <phdm@xxxxxxx>
• [PATCH v3] HID: Recognize sensors with application collections
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• Re: [PATCH v2] HID: Recognize sensors with application collections too.
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v2] HID: Recognize sensors with application collections too.
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] iio: light : max44009 : Convert to i2c's .probe_new()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: light : max44009 : Convert to i2c's .probe_new()
  • From: Anup Sharma <anupnewsmail@xxxxxxxxx>
• [PATCH v2 1/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: adc: add Texas Instruments ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v2 0/2] iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v1 2/3] iio: adc: ti-ads7924: add ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v3 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v3 2/3] iio: light: vcnl4000: Make irq handling more generic
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v3 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v3 1/3] iio: light: vcnl4000: Prepare for more generic setup
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: fxls8962af: RTC and NTP
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: vcnl4000: Make irq handling more generic
  • From: Marten Lindahl <martenli@xxxxxxxx>
• [PATCH v2] HID: Recognize sensors with application collections too.
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• [PATCH RESEND] HID: Recognize sensors with application collections too.
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• RE: [EXT] Re: [PATCH v4 2/4] iio: imu: fxos8700: fix failed initialization ODR mode assignment
  • From: Carlos Song <carlos.song@xxxxxxx>
• RE: [EXT] Re: [PATCH v4 1/4] iio: imu: fxos8700: fix incorrect ODR mode readback
  • From: Carlos Song <carlos.song@xxxxxxx>
• Re: BMI0160/260 conflicts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: BMI0160/260 conflicts
  • From: Derek John Clark <derekjohn.clark@xxxxxxxxx>
• Re: BMI0160/260 conflicts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: BMI0160/260 conflicts
  • From: Derek John Clark <derekjohn.clark@xxxxxxxxx>
• Re: fxls8962af: RTC and NTP
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: BMI0160/260 conflicts
  • From: Derek John Clark <derekjohn.clark@xxxxxxxxx>
• Re: [PATCH 1/2] iio: light: vcnl4000: Make irq handling more generic
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH v10 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v10 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: light: vcnl4000: Make irq handling more generic
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v2 3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v2 0/3] iio: light: vcnl4000: Add vcnl4040 interrupt support
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v2 1/3] iio: light: vcnl4000: Prepare for more generic setup
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH 2/2] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: BMI0160/260 conflicts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: BMI0160/260 conflicts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: vcnl4000: Make irq handling more generic
  • From: Marten Lindahl <martenli@xxxxxxxx>
• RE: [PATCH v10 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• fxls8962af: RTC and NTP
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] iio: hid: fix the retval in [accel|gyro]_3d_capture_sample
  • From: Dmitry Perchanov <dmitry.perchanov@xxxxxxxxx>
• [PATCH v2] iio: temperature: Add MCP9600 thermocouple EMF converter driver
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• Re: [PATCH v5 1/3] iio: adc: add imx93 adc support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] add imx93 adc support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: add id registers support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: st-sensors: Add LSM303C accelerometer+magnetometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: cdc: Drop redundant if check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: Add MCP9600 thermocouple EMF converter driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid: fix the retval in [accel|gyro]_3d_capture_sample
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid: fix the retval in [accel|gyro]_3d_capture_sample
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: max11410: Use asm intead of asm-generic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: adc: ti-adc128s052: Some refactorings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] counter: FTM quad: Depend on the Layerscape SoC
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• Re: [PATCH] iio: adc: ep93xx: Enable wider build testing with COMPILE_TEST
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: BMI0160/260 conflicts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] counter: FTM quad: Depend on the Layerscape SoC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] counter: intel: Depend on X86
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/4] counter: microchip: Add appropriate arch deps for TCP driver
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• [PATCH 3/4] counter: FTM quad: Depend on the Layerscape SoC
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• [PATCH 2/4] counter: intel: Depend on X86
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• [PATCH 1/4] counter: Sort the Kconfig entries alphabetically
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• BMI0160/260 conflicts
  • From: Derek John Clark <derekjohn.clark@xxxxxxxxx>
• Re: [PATCH 0/3] iio: st-sensors: Add LSM303C accelerometer+magnetometer
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: pm7250b: Add BAT_ID vadc channel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Wahaj <wahajaved@xxxxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: pm7250b: Add BAT_ID vadc channel
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 1/2] iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channel
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/2] Support ADC5_BAT_ID_100K_PU and use on PM7250b
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: st-sensors: Add LSM303C accelerometer+magnetometer
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/3] iio: st-sensors: Add LSM303C accelerometer+magnetometer
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 3/3] iio: magnetometer: st_magn: Add LSM303C
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/3] iio: accel: st_accel: Add LSM303C
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: st-sensors: Add LSM303C accelerometer+magnetometer
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: CM32181 Bug Report (Linux 6.0+)
  • From: Wahaj <wahajaved@xxxxxxxxxxxxxx>
• [PATCH v2] iio: adc: stm32-dfsdm: add id registers support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH] iio: light: max44009: Remove the unused variable max44009_of_match
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: light: max44009: Remove the unused variable max44009_of_match
  • From: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
• [PATCH] drivers: iio: cdc: Drop redundant if check
  • From: Alexander Vorwerk <zabe@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ep93xx: Enable wider build testing with COMPILE_TEST
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH] iio: temperature: Add MCP9600 thermocouple EMF converter driver
  • From: Andrew Hepp <andrew.hepp@xxxxxxxxx>
• [PATCH v1 1/1] iio: adc: max11410: Use asm intead of asm-generic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
  • From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
• Re: [PATCH v6 0/7] Add support for mp2733 battery charger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 02/11] dt-bindings: nvmem: Fix qcom,qfprom compatibles enum ordering
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 02/11] dt-bindings: nvmem: Fix qcom,qfprom compatibles enum ordering
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 03/11] dt-bindings: nvmem: Add compatible for MSM8976
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: imx93: add ADC support
  • From: haibo.chen@xxxxxxx
• [PATCH v5 0/3] add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH v5 2/3] dt-bindings: iio: adc: Add NXP IMX93 ADC
  • From: haibo.chen@xxxxxxx
• [PATCH v5 1/3] iio: adc: add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH] iio: hid: fix the retval in [accel|gyro]_3d_capture_sample
  • From: Dmitry Perchanov <dmitry.perchanov@xxxxxxxxx>
• [PATCH v2 3/3] iio: adc: ti-adc128s052: Sort headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: adc: ti-adc128s052: Drop anti-pattern of ACPI_PTR() use
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] iio: adc: ti-adc128s052: Some refactorings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 2/5] iio: pressure: bmp280: Add preinit callback
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 2/5] iio: pressure: bmp280: Add preinit callback
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: imu: fxos8700: fix failed initialization ODR mode assignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: imu: fxos8700: fix incorrect ODR mode readback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: ep93xx: Enable wider build testing with COMPILE_TEST
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] ad_sigma_delta: fix race between IRQ and completion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v4 1/3] iio: adc: add imx93 adc support
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v4 1/3] iio: adc: add imx93 adc support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: pressure: bmp280: Add preinit callback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/3] iio: adc: Kconfig: add SPI interface mention to AD7924 description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] drivers: iio: adc: Add MAX77541 ADC Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio/adc: qcom,spmi-iadc: document PM8226 compatible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio/adc: qcom,spmi-iadc: document PM8226 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: iio/adc: qcom,spmi-iadc: document PM8226 compatible
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• [PATCH v2 0/4] ARM: dts: qcom: pm8226: style fixes and new nodes
  • From: Rayyan Ansari <rayyan@xxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: ti-adc128s052: Use get_unaligned_beXX()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 4/4] iio: imu: fxos8700: fix MAGN sensor scale and unit
  • From: carlos.song@xxxxxxx
• [PATCH v4 3/4] iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
  • From: carlos.song@xxxxxxx
• [PATCH v4 1/4] iio: imu: fxos8700: fix incorrect ODR mode readback
  • From: carlos.song@xxxxxxx
• [PATCH v4 0/4] iio: imu: fxos8700: fix bugs about ODR and changes for a good readability
  • From: carlos.song@xxxxxxx
• [PATCH v4 2/4] iio: imu: fxos8700: fix failed initialization ODR mode assignment
  • From: carlos.song@xxxxxxx
• Re: [PATCH v2 2/5] iio: pressure: bmp280: Add preinit callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] Add MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 0/5] Add MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH v2 5/5] drivers: iio: adc: Add MAX77541 ADC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION c76083fac3bae1a87ae3d005b5cb1cbc761e31d5
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 5/5] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 4/5] dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 2/5] iio: pressure: bmp280: Add preinit callback
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 0/5] Add support for pressure sensor Bosch BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: imx93: add ADC support
  • From: haibo.chen@xxxxxxx
• [PATCH v4 2/3] dt-bindings: iio: adc: Add NXP IMX93 ADC
  • From: haibo.chen@xxxxxxx
• [PATCH v4 1/3] iio: adc: add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH v4 0/3] add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH 5/5] iio: pressure: bmp280: Add nvmem operations for BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 4/5] dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 3/5] iio: pressure: bmp280: Add support for new sensor BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 2/5] iio: pressure: bmp280: Add preinit callback
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 1/5] iio: pressure: bmp280: Add enumeration to handle chip variants
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 0/5] Add support for pressure sensor Bosch BMP580
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH] ad_sigma_delta: fix race between IRQ and completion
  • From: Daniel Beer <dlbeer@xxxxxxxxx>
• [PATCH AUTOSEL 6.0 12/18] iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 20/26] iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v1 3/3] dt-bindings: iio: adc: add ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v1 1/3] iio: adc: Kconfig: add SPI interface mention to AD7924 description
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH v1 3/3] dt-bindings: iio: adc: add ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• Re: [PATCH] iio: light: max44009: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] iio: adc: qcom-spmi-vadc: Propagate fw node name/label to extend_name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: accel: add the new entry in driver for fxls8967af
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: accel: add the new entry in driver for fxls8967af
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: accel: add fxls8974cf support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: maxim,max1363: fix interface typo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: imu: fxos8700: fix MAGN sensor scale and unit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: imu: fxos8700: improve readability by field mask and regmap_write
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/5] iio: imu: fxos8700: fix incorrect ODR mode readback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/5] iio: imu: fxos8700: fix incorrect ODR mode readback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: ep93xx: Add OF support
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: max1238: Fix a typo in the description
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: maxim,max1363: fix interface typo
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc: add imx93 adc support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ep93xx: Add OF support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] ad_sigma_delta: fix race between IRQ and completion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: max1238: Fix a typo in the description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc:twl6030: Enable measurement of VAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: vcnl4000: Make irq handling more generic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: sx_common: Add old register mapping
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: ti-adc128s052: Drop anti-pattern of ACPI_PTR() use
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: ti-adc128s052: Use get_unaligned_beXX()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] thermal: qcom-spmi-adc5: Suppress probe-deferral error message
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: add id registers support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] dt-bindings: iio: adc: add ADS7924
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/3] iio: adc: ti-ads7924: add ADS7924 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: KX132/134-1211
  • From: Mehdi Djait <mehdidjait@xxxxxxxxx>
• Re: [PATCH v1 1/3] iio: adc: Kconfig: add SPI interface mention to AD7924 description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] dt-bindings: iio: adc: add ADS7924
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: max44009: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: KX132/134-1211
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v1 3/3] dt-bindings: iio: adc: add ADS7924
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v1 1/3] iio: adc: Kconfig: add SPI interface mention to AD7924 description
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v1 3/3] dt-bindings: iio: adc: add ADS7924
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v1 2/3] iio: adc: ti-ads7924: add ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH v1 0/3] iio: adc: ti-ads7924: add ADS7924 driver
  • From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
• [PATCH] iio: light: max44009: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] IIO: hid-sensor-prox: add missing scale attribute
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: add id registers support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>