Add support for the basic accelerometer features such as getting the acceleration data via IIO. (raw reads, triggered buffer [data-ready] or using the WMI IRQ). Datasheet: https://kionixfs.azureedge.net/en/document/KX132-1211-Technical-Reference-Manual-Rev-5.0.pdf Signed-off-by: Mehdi Djait <mehdi.djait.k@xxxxxxxxx> --- drivers/iio/accel/kionix-kx022a-i2c.c | 2 + drivers/iio/accel/kionix-kx022a-spi.c | 2 + drivers/iio/accel/kionix-kx022a.c | 126 ++++++++++++++++++++++++++ drivers/iio/accel/kionix-kx022a.h | 53 +++++++++++ 4 files changed, 183 insertions(+) diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c index 21c4c0ae1a68..f9b2383c43f1 100644 --- a/drivers/iio/accel/kionix-kx022a-i2c.c +++ b/drivers/iio/accel/kionix-kx022a-i2c.c @@ -38,12 +38,14 @@ static int kx022a_i2c_probe(struct i2c_client *i2c) static const struct i2c_device_id kx022a_i2c_id[] = { { .name = "kx022a", .driver_data = (kernel_ulong_t)&kx_chip_info[KX022A] }, + { .name = "kx132", .driver_data = (kernel_ulong_t)&kx_chip_info[KX132] }, { } }; MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id); static const struct of_device_id kx022a_of_match[] = { { .compatible = "kionix,kx022a", .data = &kx_chip_info[KX022A] }, + { .compatible = "kionix,kx132", .data = &kx_chip_info[KX132] }, { } }; MODULE_DEVICE_TABLE(of, kx022a_of_match); diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c index ec076af0f261..86a10d6d33ff 100644 --- a/drivers/iio/accel/kionix-kx022a-spi.c +++ b/drivers/iio/accel/kionix-kx022a-spi.c @@ -38,12 +38,14 @@ static int kx022a_spi_probe(struct spi_device *spi) static const struct spi_device_id kx022a_spi_id[] = { { .name = "kx022a", .driver_data = (kernel_ulong_t)&kx_chip_info[KX022A] }, + { .name = "kx132", .driver_data = (kernel_ulong_t)&kx_chip_info[KX132] }, { } }; MODULE_DEVICE_TABLE(spi, kx022a_spi_id); static const struct of_device_id kx022a_of_match[] = { { .compatible = "kionix,kx022a", .data = &kx_chip_info[KX022A] }, + { .compatible = "kionix,kx132", .data = &kx_chip_info[KX132] }, { } }; MODULE_DEVICE_TABLE(of, kx022a_of_match); diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c index 27e8642aa8f5..3cacec99f792 100644 --- a/drivers/iio/accel/kionix-kx022a.c +++ b/drivers/iio/accel/kionix-kx022a.c @@ -128,6 +128,101 @@ static const struct regmap_config kx022a_regmap_config = { .cache_type = REGCACHE_RBTREE, }; +/* Regmap configs kx132 */ +static const struct regmap_range kx132_volatile_ranges[] = { + { + .range_min = KX132_REG_XADP_L, + .range_max = KX132_REG_COTR, + }, { + .range_min = KX132_REG_TSCP, + .range_max = KX132_REG_INT_REL, + }, { + /* The reset bit will be cleared by sensor */ + .range_min = KX132_REG_CNTL2, + .range_max = KX132_REG_CNTL2, + }, { + .range_min = KX132_REG_BUF_STATUS_1, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_volatile_regs = { + .yes_ranges = &kx132_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_volatile_ranges), +}; + +static const struct regmap_range kx132_precious_ranges[] = { + { + .range_min = KX132_REG_INT_REL, + .range_max = KX132_REG_INT_REL, + }, +}; + +static const struct regmap_access_table kx132_precious_regs = { + .yes_ranges = &kx132_precious_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_precious_ranges), +}; + +static const struct regmap_range kx132_read_only_ranges[] = { + { + .range_min = KX132_REG_XADP_L, + .range_max = KX132_REG_INT_REL, + }, { + .range_min = KX132_REG_BUF_STATUS_1, + .range_max = KX132_REG_BUF_STATUS_2, + }, { + .range_min = KX132_REG_BUF_READ, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_ro_regs = { + .no_ranges = &kx132_read_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(kx132_read_only_ranges), +}; + +static const struct regmap_range kx132_write_only_ranges[] = { + { + .range_min = KX132_REG_MAN_WAKE, + .range_max = KX132_REG_MAN_WAKE, + }, { + .range_min = KX132_REG_SELF_TEST, + .range_max = KX132_REG_SELF_TEST, + }, { + .range_min = KX132_REG_BUF_CLEAR, + .range_max = KX132_REG_BUF_CLEAR, + }, +}; + +static const struct regmap_access_table kx132_wo_regs = { + .no_ranges = &kx132_write_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(kx132_write_only_ranges), +}; + +static const struct regmap_range kx132_noinc_read_ranges[] = { + { + .range_min = KX132_REG_BUF_READ, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_nir_regs = { + .yes_ranges = &kx132_noinc_read_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_noinc_read_ranges), +}; + +static const struct regmap_config kx132_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &kx132_volatile_regs, + .rd_table = &kx132_wo_regs, + .wr_table = &kx132_ro_regs, + .rd_noinc_table = &kx132_nir_regs, + .precious_table = &kx132_precious_regs, + .max_register = KX132_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + static const struct iio_mount_matrix * kx022a_get_mount_matrix(const struct iio_dev *idev, const struct iio_chan_spec *chan) @@ -175,6 +270,13 @@ static const struct iio_chan_spec kx022a_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(3), }; +static const struct iio_chan_spec kx132_channels[] = { + KX022A_ACCEL_CHAN(X, 0, KX132), + KX022A_ACCEL_CHAN(Y, 1, KX132), + KX022A_ACCEL_CHAN(Z, 2, KX132), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + /* * The sensor HW can support ODR up to 1600 Hz, which is beyond what most of the * Linux CPUs can handle without dropping samples. Also, the low power mode is @@ -249,6 +351,30 @@ const struct kx022a_chip_info kx_chip_info[] = { .inc6 = KX022A_REG_INC6, .xout_l = KX022A_REG_XOUT_L, }, + [KX132] = { + .name = "kx132", + .type = KX132, + .regmap_config = &kx132_regmap_config, + .channels = kx132_channels, + .num_channels = ARRAY_SIZE(kx132_channels), + .fifo_length = KX132_FIFO_LENGTH, + .who = KX132_REG_WHO, + .id = KX132_ID, + .cntl = KX132_REG_CNTL, + .cntl2 = KX132_REG_CNTL2, + .odcntl = KX132_REG_ODCNTL, + .buf_cntl1 = KX132_REG_BUF_CNTL1, + .buf_cntl2 = KX132_REG_BUF_CNTL2, + .buf_clear = KX132_REG_BUF_CLEAR, + .buf_status1 = KX132_REG_BUF_STATUS_1, + .buf_smp_lvl_mask = KX132_MASK_BUF_SMP_LVL, + .buf_read = KX132_REG_BUF_READ, + .inc1 = KX132_REG_INC1, + .inc4 = KX132_REG_INC4, + .inc5 = KX132_REG_INC5, + .inc6 = KX132_REG_INC6, + .xout_l = KX132_REG_XOUT_L, + }, }; EXPORT_SYMBOL_NS_GPL(kx_chip_info, IIO_KX022A); diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h index 3bb40e9f5613..7e43bdb37156 100644 --- a/drivers/iio/accel/kionix-kx022a.h +++ b/drivers/iio/accel/kionix-kx022a.h @@ -90,8 +90,61 @@ #define KX022A_REG_SELF_TEST 0x60 #define KX022A_MAX_REGISTER 0x60 + +#define KX132_REG_WHO 0x13 +#define KX132_ID 0x3d + +#define KX132_FIFO_LENGTH 86 + +#define KX132_REG_CNTL2 0x1c +#define KX132_REG_CNTL 0x1b +#define KX132_MASK_RES BIT(6) +#define KX132_GSEL_2 0x0 +#define KX132_GSEL_4 BIT(3) +#define KX132_GSEL_8 BIT(4) +#define KX132_GSEL_16 GENMASK(4, 3) + +#define KX132_REG_INS2 0x17 +#define KX132_MASK_INS2_WMI BIT(5) + +#define KX132_REG_XADP_L 0x02 +#define KX132_REG_XOUT_L 0x08 +#define KX132_REG_YOUT_L 0x0a +#define KX132_REG_ZOUT_L 0x0c +#define KX132_REG_COTR 0x12 +#define KX132_REG_TSCP 0x14 +#define KX132_REG_INT_REL 0x1a + +#define KX132_REG_ODCNTL 0x21 + +#define KX132_REG_BTS_WUF_TH 0x4a +#define KX132_REG_MAN_WAKE 0x4d + +#define KX132_REG_BUF_CNTL1 0x5e +#define KX132_REG_BUF_CNTL2 0x5f +#define KX132_REG_BUF_STATUS_1 0x60 +#define KX132_REG_BUF_STATUS_2 0x61 +#define KX132_MASK_BUF_SMP_LVL GENMASK(9, 0) +#define KX132_REG_BUF_CLEAR 0x62 +#define KX132_REG_BUF_READ 0x63 +#define KX132_ODR_SHIFT 3 +#define KX132_FIFO_MAX_WMI_TH 86 + +#define KX132_REG_INC1 0x22 +#define KX132_REG_INC5 0x26 +#define KX132_REG_INC6 0x27 +#define KX132_IPOL_LOW 0 +#define KX132_IPOL_HIGH KX_MASK_IPOL +#define KX132_ITYP_PULSE KX_MASK_ITYP + +#define KX132_REG_INC4 0x25 + +#define KX132_REG_SELF_TEST 0x5d +#define KX132_MAX_REGISTER 0x76 + enum kx022a_device_type { KX022A, + KX132, }; enum { -- 2.30.2
