Linux IIO Development

• Thread Index

• Re: [RFC PATCH] iio: adc: qcom-spmi-vadc: Propagate fw node name/label to extend_name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 0/4] Add TI TMP116 Support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] iio: temperature: tmp117: cosmetic alignment cleanup
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: iio: ti,tmp117: fix documentation link
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: light: vcnl4000: Add interrupt support for vcnl4040
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH 1/2] iio: light: vcnl4000: Make irq handling more generic
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH 0/2] iio: light: vcnl4000: Add vcnl4040 interrupt support
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v2] iio: proximity: sx_common: Add old register mapping
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: ti,tmp117: fix documentation link
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: ti,tmp117: fix documentation link
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/4] iio: temperature: tmp117: add TI TMP116 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: iio: ti,tmp117: add binding for the TMP116
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 0/4] Add TI TMP116 Support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 4/4] iio: temperature: tmp117: cosmetic alignment cleanup
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] IIO: More HID custom sensors
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ep93xx: Add OF support
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH v3 0/3] add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH v3 3/3] arm64: dts: imx93: add ADC support
  • From: haibo.chen@xxxxxxx
• [PATCH v3 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: haibo.chen@xxxxxxx
• [PATCH v3 1/3] iio: adc: add imx93 adc support
  • From: haibo.chen@xxxxxxx
• Re: [PATCH v3 3/4] dt-bindings: iio: accel: fxls8962af: add new compatible string
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v10 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] ad_sigma_delta: fix race between IRQ and completion
  • From: Daniel Beer <dlbeer@xxxxxxxxx>
• Re: [PATCH] thermal: qcom-spmi-adc5: Suppress probe-deferral error message
  • From: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
• [PATCH] iio:adc:twl6030: Enable measurement of VAC
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] HID: Recognize sensors with application collections too.
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• Re: [PATCH] thermal: qcom-spmi-adc5: Suppress probe-deferral error message
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] thermal: qcom-spmi-adc5: Suppress probe-deferral error message
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v10 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v10 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v10 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH] thermal: qcom-spmi-adc5: Suppress probe-deferral error message
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v9 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• RE: [PATCH v9 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v9 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• RE: [PATCH v9 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v9 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v9 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: max1238: Fix a typo in the description
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: max1238: Fix a typo in the description
  • From: Fabio Estevam <festevam@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v4 0/4] IIO: More HID custom sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: ep93xx: Add cirrus,ep9301-adc description
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH 2/2] iio: adc: ep93xx: Add OF support
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v4 0/4] IIO: More HID custom sensors
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: imx93: add ADC support
  • From: haibo.chen@xxxxxxx
• [PATCH v2 1/3] iio: adc: add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH v2 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: haibo.chen@xxxxxxx
• [PATCH v1 2/2] iio: adc: ti-adc128s052: Sort headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] iio: adc: ti-adc128s052: Use get_unaligned_beXX()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: adc: ti-adc128s052: Drop anti-pattern of ACPI_PTR() use
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v9 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v9 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] dt-bindings: iio: accel: fxls8974cf: add new compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: iio: accel: fxls8962af: add new compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: accel: add the new entry in driver for fxls8967af
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: accel: add the new entry in driver for fxls8967af
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 0/4] IIO: More HID custom sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 5/5] iio: imu: fxos8700: fix MAGN sensor scale and unit
  • From: carlos.song@xxxxxxx
• [PATCH v3 0/5] iio: imu: fxos8700: fix bugs about ODR and changes for a good readability
  • From: carlos.song@xxxxxxx
• [PATCH v3 3/5] iio: imu: fxos8700: fix failed initialization ODR mode assignment
  • From: carlos.song@xxxxxxx
• [PATCH v3 4/5] iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
  • From: carlos.song@xxxxxxx
• [PATCH v3 2/5] iio: imu: fxos8700: improve readability by field mask and regmap_write
  • From: carlos.song@xxxxxxx
• [PATCH v3 1/5] iio: imu: fxos8700: fix incorrect ODR mode readback
  • From: carlos.song@xxxxxxx
• Re: [PATCH v4 0/4] IIO: More HID custom sensors
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: iio: accel: fxls8962af: add new compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: accel: add the new entry in driver for fxls8967af
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: accel: add the new entry in driver for FXLS8967AF
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 0/4] FXLS8967AF and FXLS8974CF support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 39ab32797f072eaf86b1faa7384ac73450684110
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 4/4] dt-bindings: iio: accel: fxls8974cf: add new compatible string
  • From: Han Xu <han.xu@xxxxxxx>
• [PATCH v3 3/4] dt-bindings: iio: accel: fxls8962af: add new compatible string
  • From: Han Xu <han.xu@xxxxxxx>
• [PATCH 2/4] iio: accel: add the new entry in driver for FXLS8967AF
  • From: Han Xu <han.xu@xxxxxxx>
• [PATCH v3 2/4] iio: accel: add the new entry in driver for fxls8967af
  • From: Han Xu <han.xu@xxxxxxx>
• [PATCH v3 1/4] iio: accel: add fxls8974cf support
  • From: Han Xu <han.xu@xxxxxxx>
• [PATCH v3 0/4] FXLS8967AF and FXLS8974CF support
  • From: Han Xu <han.xu@xxxxxxx>
• Re: [PATCH 1/2] iio: accel: add the new entry in driver for FXLS8967AF
  • From: Han Xu <han.xu@xxxxxxx>
• Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• RE: [PATCH v8 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v1 01/11] iio: light: tsl2563: Do not hardcode interrupt trigger type
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v8 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v8 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v1 01/11] iio: light: tsl2563: Do not hardcode interrupt trigger type
  • From: Ferry Toth <fntoth@xxxxxxxxx>
• RE: [PATCH v8 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 0/5] staging: drivers: mfd: Add MAX77541 MFD and related device drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: imu: fxos8700: fix MAGN sensor scale and unit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: imu: fxos8700: fix ODR register readback and initialization
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: imu: fxos8700: fix ACCEL measurement range selection
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/7] iio: imu: fxos8700: fix IMU data bits returned to user space
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/5] staging: drivers: mfd: Add MAX77541 MFD and related device drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: imu: fxos8700: fix incompete ACCEL and MAGN channels readback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: imu: fxos8700: fix map lable of channel type to MAGN sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: kmx61: Fix spelling mistake "Errow" -> "Error"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: sx_common: Add old register mapping
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 01/11] iio: light: tsl2563: Do not hardcode interrupt trigger type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 04/11] iio: light: tsl2563: Make use of the macros from bits.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 03/11] iio: light: tsl2563: Configure INT in one place
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: add the new entry in driver for FXLS8967AF
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] staging: drivers: iio: adc: Adc MAX77541 ADC Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] staging: drivers: regulator: Add MAX77541 Regulator Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] staging: drivers: mfd: Add MAX77541/MAX77540 PMIC Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/5] staging: drivers: mfd: Add MAX77541 MFD and related device drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: Convert to use sysfs_emit_at() API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: bmc150_magn: Convert to use sysfs_emit_at() API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bma180: Convert to use sysfs_emit_at() API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: health: afe440x: Convert to use sysfs_emit_at() API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [POC] iio: ad74413: allow channel configuration to be given via module parameters
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc:twl6030: Enable measurements of VUSB, VBAT and others
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 0/7] Add support for mp2733 battery charger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 132/606] iio: light: max44009: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH v8 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v8 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH] iio: imu: kmx61: Fix spelling mistake "Errow" -> "Error"
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: sx_common: Add old register mapping
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• RE: [PATCH v7 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v7 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• RE: [POC] iio: ad74413: allow channel configuration to be given via module parameters
  • From: "Tanislav, Cosmin" <Cosmin.Tanislav@xxxxxxxxxx>
• RE: [PATCH] iio: adc: vf610_adc: Convert to use sysfs_emit_at() API
  • From: Bough Chen <haibo.chen@xxxxxxx>
• [PATCH] iio: proximity: sx_common: Add old register mapping
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [POC] iio: ad74413: allow channel configuration to be given via module parameters
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: add the new entry in driver for FXLS8967AF
  • From: sean@xxxxxxxxxx
• Re: [PATCH 2/2] dt-bindings: iio: accel: fxls8962af: add new compatible string
  • From: sean@xxxxxxxxxx
• [PATCH v2 7/7] iio: imu: fxos8700: fix MAGN sensor scale and unit
  • From: carlos.song@xxxxxxx
• [PATCH v2 6/7] iio: imu: fxos8700: fix ODR register readback and initialization
  • From: carlos.song@xxxxxxx
• [PATCH v2 5/7] iio: imu: fxos8700: fix ACCEL measurement range selection
  • From: carlos.song@xxxxxxx
• [PATCH v2 4/7] iio: imu: fxos8700: fix IMU data bits returned to user space
  • From: carlos.song@xxxxxxx
• [PATCH v2 3/7] iio: imu: fxos8700: fix incompete ACCEL and MAGN channels readback
  • From: carlos.song@xxxxxxx
• [PATCH v2 2/7] iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback
  • From: carlos.song@xxxxxxx
• [PATCH v2 1/7] iio: imu: fxos8700: fix map lable of channel type to MAGN sensor
  • From: carlos.song@xxxxxxx
• [PATCH v2 0/7] iio: imu: fxos8700: fix few bugs in data readback and mode set
  • From: carlos.song@xxxxxxx
• Re: [PATCH v2 1/4] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v1 09/11] iio: light: tsl2563: Use dev_get_drvdata() directly in PM callbacks
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 07/11] iio: light: tsl2563: Drop legacy platform data code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 08/11] iio: light: tsl2563: Utilise temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 05/11] iio: light: tsl2563: Drop unused defintion(s)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 01/11] iio: light: tsl2563: Do not hardcode interrupt trigger type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 10/11] iio: light: tsl2563: sort header inclusion alphabetically
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 04/11] iio: light: tsl2563: Make use of the macros from bits.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 02/11] iio: light: tsl2563: Use i2c_smbus_write_word_data() in tsl2563_configure()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 11/11] iio: light: tsl2563: Keep Makefile sorted by module name
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/11] iio: light: tsl2563: Simplify with dev_err_probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 03/11] iio: light: tsl2563: Configure INT in one place
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: accel: fxls8962af: add new compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] iio: accel: add the new entry in driver for FXLS8967AF
  • From: Han Xu <han.xu@xxxxxxx>
• [PATCH 2/2] dt-bindings: iio: accel: fxls8962af: add new compatible string
  • From: Han Xu <han.xu@xxxxxxx>
• Re: [PATCH 4/5] staging: dt-bindings: regulator: adi,max77541.yaml Add MAX77541 Regulator bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] staging: dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] staging: drivers: iio: adc: Adc MAX77541 ADC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] staging: drivers: mfd: Add MAX77541/MAX77540 PMIC Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] staging: drivers: regulator: Add MAX77541 Regulator Support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] staging: drivers: mfd: Add MAX77541 MFD and related device drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] staging: dt-bindings: regulator: adi,max77541.yaml Add MAX77541 Regulator bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/5] staging: dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] iio: bma180: Convert to use sysfs_emit_at() API
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
• [PATCH 5/5] staging: drivers: iio: adc: Adc MAX77541 ADC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH 4/5] staging: dt-bindings: regulator: adi,max77541.yaml Add MAX77541 Regulator bindings
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH 3/5] staging: drivers: regulator: Add MAX77541 Regulator Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH 1/5] staging: drivers: mfd: Add MAX77541/MAX77540 PMIC Support
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH 2/5] staging: dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• [PATCH 0/5] staging: drivers: mfd: Add MAX77541 MFD and related device drivers
  • From: Okan Sahin <okan.sahin@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: bmc150_magn: Convert to use sysfs_emit_at() API
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: magnetometer: hmc5843: Convert to use sysfs_emit_at() API
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: trigger: stm32-timer: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: st_sensors: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH] iio: magnetometer: mag3110: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: magnetometer: hmc5843: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: magnetometer: bmc150_magn: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: light: zopt2201: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: light: tsl2772: Convert to use sysfs_emit()/sysfs_emit_at() APIs
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: light: lv0104cs: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: light: ltr501: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: light: cm3232: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: light: bh1750: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: humidity: hts211: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: health: afe440x: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: chemical: scd30: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: adc: vf610_adc: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: adc: nau7802: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: adc: adi-axi-adc: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: ad7768-1: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: ad7606: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: ad7192: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: mma8452: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: bma180: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: adxl372: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: qcom,spmi-vadc: simplify compatible enum
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 2/2] dt-bindings: iio: adc: qcom,spmi-vadc: extend example
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 00/11] MSM8956/76 and Sony Xperia X / X Compact support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v6 0/7] Add support for mp2733 battery charger
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH] iio: accel: Convert to use sysfs_emit_at() API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: accel: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH 132/606] iio: light: max44009: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: leds: Add 'cm3605' to 'linux,default-trigger'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 5/6] counter: Add Renesas RZ/V2M TIM counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 0/6] Add RZ/V2M Compare-Match Timer (TIM) support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: common: scmi_iio: use sysfs_emit() to instead of scnprintf()
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio:adc:twl6030: Enable measurements of VUSB, VBAT and others
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 14/14] iio: pressure: ms5611: Switch to fully devm_ managed registration.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/14] iio: pressure: ms5611: Use devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/14] iio: accel: bma400: Use devm_regulator_bulk_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: iio: adc: qcom,pm8018-adc: allow specifying MPP channels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: common: scmi_iio: use sysfs_emit() to instead of scnprintf()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: use sysfs_emit() to instead of scnprintf()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: ad5686: Add an entry for AD5337
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc:twl6030: Enable measurements of VUSB, VBAT and others
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: iio: adc: qcom,pm8018-adc: allow specifying MPP channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: imu: fxos8700: fix magnetometer scale getting error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: imu: fxos8700: fix ODR offset error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: fxos8700: fix CTRL_REG1 register configuration error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: imu: fxos8700: fix get data function error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx-ams: fix devm_krealloc() return value check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: add TI LMP92064 controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: berlin2-adc: Add missing of_node_put() in error path
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: leds: Add 'cm3605' to 'linux,default-trigger'
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: iio: adc: qcom,pm8018-adc: allow specifying MPP channels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/4] dt-bindings: add missing subdevices to qcom-pm8xxx schema
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: leds: pm8058: convert from txt to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,adc081c: Document the binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: stm32-dfsdm: fill module aliases
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ezo-sensor: refactor IIO_CHAN_INFO_SCALE checks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 0/3] add ti tmag5273 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] iio: adc: qcom-spmi-vadc: Propagate fw node name/label to extend_name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Removing the last of IIO_COUNT (stm32-timer-trigger)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: chemical: atlas-ezo-sensor: refactor IIO_CHAN_INFO_SCALE checks
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2] iio: adc: stm32-dfsdm: fill module aliases
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: run-time change of configuration of ad74412
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• run-time change of configuration of ad74412
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH 1/4] iio: imu: fxos8700: fix get data function error
  • From: Carlos Song <carlos.song@xxxxxxx>
• [PATCH 4/4] iio: imu: fxos8700: fix magnetometer scale getting error
  • From: Carlos Song <carlos.song@xxxxxxx>
• [PATCH 3/4] iio: imu: fxos8700: fix ODR offset error
  • From: Carlos Song <carlos.song@xxxxxxx>
• [PATCH 0/4] iio: imu: fxos8700: fix few bug in reading raw data and configuring register
  • From: Carlos Song <carlos.song@xxxxxxx>
• [PATCH 2/4] iio: imu: fxos8700: fix CTRL_REG1 register configuration error
  • From: Carlos Song <carlos.song@xxxxxxx>
• Re: [PATCH v2 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Cai Huoqing <cai.huoqing@xxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: leds: pm8058: convert from txt to YAML format
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v2 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Bough Chen <haibo.chen@xxxxxxx>
• [PATCH 4/5] dt-bindings: iio: adc: qcom,pm8018-adc: allow specifying MPP channels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/5] dt-bindings: leds: Add 'cm3605' to 'linux,default-trigger'
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/5] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/5] dt-bindings: leds: pm8058: convert from txt to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/5] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/5] dt-bindings: add missing subdevices to qcom-pm8xxx schema
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH] iio:adc:twl6030: Enable measurements of VUSB, VBAT and others
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v7 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: ad5686: Add an entry for AD5337
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v6 1/3] iio: add struct declaration for iio types
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v6 2/3] dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v6 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v6 0/3] add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH] iio: common: scmi_iio: use sysfs_emit() to instead of scnprintf()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] iio: adc: at91-sama5d2_adc: use sysfs_emit() to instead of scnprintf()
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH v7 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_enable and external_input_phase_clock_select
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [RFC PATCH] iio: adc: qcom-spmi-vadc: Propagate fw node name/label to extend_name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: fill module aliases
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: ad5686: Add an entry for AD5337
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 2/2] iio: dac: ad5686: Add support for AD5337
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v5 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx-ams: fix devm_krealloc() return value check
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v5 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: fill module aliases
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v5 1/3] iio: add struct declaration for iio types
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v5 0/3] add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• RE: [PATCH 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Frank Li <frank.li@xxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Frank Li <frank.li@xxxxxxx>
• Re: [PATCH 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 1/1] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: add struct declaration for iio types
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v4 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] iio: add struct declaration for iio types
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: berlin2-adc: Add missing of_node_put() in error path
  • From: Xiongfeng Wang <wangxiongfeng2@xxxxxxxxxx>
• Re: [PATCH 1/2] PM: runtime: Synchronize PM runtime enable state with parent
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: add TI LMP92064 controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PULL] Second set of Counter fixes for 6.1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PULL] Second set of Counter fixes for 6.1
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: add ADC driver for the TI LMP92064 controller
  • From: Leonard Göhrs <l.goehrs@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: add TI LMP92064 controller
  • From: Leonard Göhrs <l.goehrs@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,adc081c: Document the binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,adc081c: Document the binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,adc081c: Document the binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,adc081c: Document the binding
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v4 0/4] IIO: More HID custom sensors
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,adc081c: Document the binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 4th set of IIO fixes for 6.1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] IIO: 2nd set of new device support, cleanups and minor fixes for 6.2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,adc081c: Document the binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: Removing the last of IIO_COUNT (stm32-timer-trigger)
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v4 2/4] HID: hid-sensor-custom: Add LISS custom sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] HID: hid-sensor-custom: Allow more custom iio sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] IIO: hid-sensor-als: Use generic usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/4] IIO: hid-sensor-prox: Use generic usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO: 2nd set of new device support, cleanups and minor fixes for 6.2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 4th set of IIO fixes for 6.1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: ti,adc081c: Document the binding
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PULL V2] IIO: First set of new device support, features and cleanup for 6.2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: adc: xilinx-ams: fix devm_krealloc() return value check
  • From: Marco Pagani <marpagan@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 3/3] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] iio: add struct declarations for iio types
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v4 1/4] HID: hid-sensor-custom: Allow more custom iio sensors
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• [PATCH v4 3/4] IIO: hid-sensor-als: Use generic usage
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• [PATCH v4 4/4] IIO: hid-sensor-prox: Use generic usage
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• [PATCH v4 0/4] IIO: More HID custom sensors
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• [PATCH v4 2/4] HID: hid-sensor-custom: Add LISS custom sensors
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• Re: [PATCH v6 2/7] power: supply: fix wrong interpretation of register value
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION c35bd4e428856ed8c1fae7f7dfa08a9141c153d1
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/2] add support for ISM330IS
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: addac: ad74413r: fix blank line after declaration warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v7 4/5] counter: Add Renesas RZ/G2L MTU3a counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v7 3/5] Documentation: ABI: sysfs-bus-counter: add cascade_enable and external_input_phase_clock_select
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH] iio: addac: ad74413r: fix blank line after declaration warning
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH] iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v2 7/9] dt-bindings: drop redundant part of title (beginning)
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 6/9] dt-bindings: drop redundant part of title (end, part three)
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: drop redundant part of title of shared bindings
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 4/9] dt-bindings: drop redundant part of title (end)
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: drop redundant part of title of shared bindings
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2 4/9] dt-bindings: drop redundant part of title (end)
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330is
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/2] add support for ISM330IS
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add ism330is
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ISM330IS
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 0/9] dt-bindings: cleanup titles
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc128s052: add proper .data members in adc128_of_match table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: adc: stm32: add smart calibration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: addac: ad74413r: add spi device id table, support reset gpio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] add support for LSM6DSO16IS
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] AD74115
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: dac: ad5592r: add gpio_chip names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: addac: ad74413r: fix integer promotion bug in ad74413_get_input_current_offset()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/9] iio: adis: add '__adis_enable_irq()' implementation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 0/9] Add '__adis_enable_irq()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max11410: fix incomplete vref buffer mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v11] iio: temperature: Add driver support for Maxim MAX30208
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] IIO: First set of new device support, features and cleanup for 6.2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL V2] IIO: First set of new device support, features and cleanup for 6.2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] IIO: First set of new device support, features and cleanup for 6.2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] IIO: First set of new device support, features and cleanup for 6.2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v6 3/7] mfd: mp2629: introduce chip id machanism to distinguish chip
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v6 0/7] Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v6 1/7] mfd: mp2629: fix failed to get iio channel by device name
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v6 4/7] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v6 2/7] power: supply: fix wrong interpretation of register value
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v6 6/7] power: supply: Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v6 5/7] iio: adc: mp2629: restrict input voltage mask for mp2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v6 7/7] power: supply: mp2629: Add USB fast charge settings
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v3 2/2] drivers: iio: dac: Add AD5754 DAC driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: dac: add adi,ad5754.yaml
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 4/4] IIO: hid-sensor-prox: Use generic usage
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 3/4] IIO: hid-sensor-als: Use generic usage
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/4] HID: hid-sensor-custom: Allow more custom iio sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/4] HID: hid-sensor-custom: Allow more custom iio sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: drop redundant part of title (manual)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 7/9] dt-bindings: drop redundant part of title (beginning)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 6/9] dt-bindings: drop redundant part of title (end, part three)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: drop redundant part of title (end, part two)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 4/9] dt-bindings: drop redundant part of title (end)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: drop redundant part of title of shared bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v5] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 05/31] tools: iio: iio_generic_buffer: Fix read size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.0 06/44] tools: iio: iio_generic_buffer: Fix read size
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Edmund Berenson <edmund.berenson@xxxxxxxxx>
• Re: [PATCH 0/3] iio: adc: stm32: add smart calibration
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v5] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: drop redundant part of title (end, part two)
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: drop redundant part of title of shared bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: drop redundant part of title (manual)
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 7/9] dt-bindings: drop redundant part of title (beginning)
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 6/9] dt-bindings: drop redundant part of title (end, part three)
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 4/9] dt-bindings: drop redundant part of title (end)
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 9/9] dt-bindings: drop redundant part of title (manual)
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 8/9] dt-bindings: clock: drop redundant part of title
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 7/9] dt-bindings: drop redundant part of title (beginning)
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 6/9] dt-bindings: drop redundant part of title (end, part three)
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: drop redundant part of title (end, part two)
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 4/9] dt-bindings: drop redundant part of title (end)
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 1/9] dt-bindings: drop redundant part of title of shared bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 3/9] dt-bindings: clock: st,stm32mp1-rcc: add proper title
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 567/606] staging: iio: ad5933: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 3rd set of IIO fixes for 6.1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Edmund Berenson <edmund.berenson@xxxxxxxxx>
• Re: [PATCH v4] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] iio: adc128s052: add proper .data members in adc128_of_match table
  • From: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
• [PATCH v4] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Edmund Berenson <edmund.berenson@xxxxxxxxx>
• Re: [PATCH 567/606] staging: iio: ad5933: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 567/606] staging: iio: ad5933: Convert to i2c's .probe_new()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: adc: max11410: fix incomplete vref buffer mask
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• Re: [PATCH 171/606] iio: pressure: icp10100: Convert to i2c's .probe_new()
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH v6 7/9] staging: iio: accel: adis16203: Call '__adis_initial_startup()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 6/9] iio: imu: adis16400: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 8/9] staging: iio: accel: adis16240: Call '__adis_initial_startup()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 2/9] iio: accel: adis16201: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 0/9] Add '__adis_enable_irq()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 9/9] iio: imu: adis: Remove adis_initial_startup function
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 3/9] iio: accel: adis16209: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 4/9] iio: gyro: adis16136: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 5/9] iio: gyro: adis16260: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v6 1/9] iio: adis: add '__adis_enable_irq()' implementation
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: use devm_platform_get_and_ioremap_resource()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: use devm_platform_get_and_ioremap_resource()
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH v2] HID: hid-sensor-custom: set fixed size for custom attributes
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v3 3/4] IIO: hid-sensor-als: Use generic usage
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] IIO: hid-sensor-als: Use generic usage
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH v11] iio: temperature: Add driver support for Maxim MAX30208
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/9] iio: adis: add '__adis_enable_irq()' implementation
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v10] iio: temperature: Add driver support for Maxim MAX30208
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 8/9] staging: iio: accel: adis16240: Call '__adis_initial_startup()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 7/9] staging: iio: accel: adis16203: Call '__adis_initial_startup()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 6/9] iio: imu: adis16400: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 9/9] iio: imu: adis: Remove adis_initial_startup function
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 3/9] iio: accel: adis16209: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 1/9] iio: adis: add '__adis_enable_irq()' implementation
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 0/9] Add '__adis_enable_irq()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 4/9] iio: gyro: adis16136: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 5/9] iio: gyro: adis16260: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v5 2/9] iio: accel: adis16201: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• RE: [PATCH v9] iio: temperature: Add driver support for Maxim MAX30208
  • From: "Khandelwal, Rajat" <rajat.khandelwal@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 7/9] dt-bindings: drop redundant part of title (beginning)
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 067/606] iio: adc: max9611: Convert to i2c's .probe_new()
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 2/2] iio: magnetometer: add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] add ti tmag5273 driver
  • From: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
• [PATCH v4 9/9] iio: imu: adis: Remove adis_initial_startup function
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 3/9] iio: accel: adis16209: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 6/9] iio: imu: adis16400: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 7/9] staging: iio: accel: adis16203: Call '__adis_initial_startup()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 8/9] staging: iio: accel: adis16240: Call '__adis_initial_startup()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 5/9] iio: gyro: adis16260: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 4/9] iio: gyro: adis16136: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 2/9] iio: accel: adis16201: Call '__adis_initial_startup()' in probe
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 1/9] iio: adis: add '__adis_enable_irq()' implementation
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH v4 0/9] Add '__adis_enable_irq()'
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: dac: add adi,ad5754.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 9/9] dt-bindings: drop redundant part of title (manual)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 8/9] dt-bindings: clock: drop redundant part of title
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 7/9] dt-bindings: drop redundant part of title (beginning)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 5/9] dt-bindings: drop redundant part of title (end, part two)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/9] dt-bindings: drop redundant part of title (end)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/9] dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/9] dt-bindings: clock: st,stm32mp1-rcc: add proper title
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/9] dt-bindings: drop redundant part of title of shared bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 0/9] dt-bindings: cleanup titles
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Edmund Berenson <edmund.berenson@xxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Edmund Berenson <edmund.berenson@xxxxxxxxx>
• Re: [PATCH 166/606] iio: pressure: bmp280-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: addac: add AD74115
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Edmund Berenson <edmund.berenson@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 054/606] iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: adc: ad7923: adjust documentation
  • From: Edmund Berenson <edmund.berenson@xxxxxxxxx>
• [PATCH v2 1/2] iio: adc: ad7923: Add ad7927
  • From: Edmund Berenson <edmund.berenson@xxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH 092/606] iio: dac: ti-dac5571: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 054/606] iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 056/606] iio: accel: mma8452: Convert to i2c's .probe_new()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 054/606] iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH 117/606] iio: light: apds9960: Convert to i2c's .probe_new()
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 190/606] iio: temperature: tsys02d: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 187/606] iio: temperature: tmp006: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 182/606] iio: proximity: rfd77402: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 074/606] iio: chemical: atlas-ezo-sensor: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 090/606] iio: dac: max5821: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 153/606] iio: magnetometer: ak8974: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 068/606] iio: adc: mcp3422: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 160/606] iio: potentiometer: ad5272: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 138/606] iio: light: si1145: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 060/606] iio: adc: ad7291: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 141/606] iio: light: tcs3414: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 181/606] iio: proximity: pulsedlight-lidar-lite-v2: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 126/606] iio: light: isl29028: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 062/606] iio: adc: ina2xx-adc: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 184/606] iio: proximity: sx9500: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 120/606] iio: light: cm3232: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 105/606] iio: humidity: si7005: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 083/606] iio: dac: ad5380: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 069/606] iio: adc: ti-adc081c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 065/606] iio: adc: ltc2497: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 152/606] iio: light: zopt2201: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 178/606] iio: pressure: zpa2326_i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 180/606] iio: proximity: mb1232: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 066/606] iio: adc: max1363: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 059/606] iio: adc: ad7091r5: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 174/606] iio: pressure: ms5611_i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 122/606] iio: light: cm36651: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 110/606] iio: imu: kmx61: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 172/606] iio: pressure: mpl115_i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 133/606] iio: light: noa1305: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 067/606] iio: adc: max9611: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 167/606] iio: pressure: dlhl60d: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 146/606] iio: light: tsl4531: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 185/606] iio: temperature: mlx90614: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 171/606] iio: pressure: icp10100: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 173/606] iio: pressure: mpl3115: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 164/606] iio: potentiostat: lmp91000: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 084/606] iio: dac: ad5446: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 114/606] iio: light: al3010: Convert to i2c's .probe_new()
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 189/606] iio: temperature: tsys01: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 156/606] iio: magnetometer: hmc5843: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 168/606] iio: pressure: dps310: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 104/606] iio: humidity: htu21: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 140/606] iio: light: stk3310: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 135/606] iio: light: pa12203001: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 082/606] iio: dac: ad5064: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 136/606] iio: light: rpr0521: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 144/606] iio: light: tsl2583: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 128/606] iio: light: jsa1212: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 127/606] iio: light: isl29125: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 567/606] staging: iio: ad5933: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 568/606] staging: iio: ade7854: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 176/606] iio: pressure: st_pressure_i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 134/606] iio: light: opt3001: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 101/606] iio: humidity: hdc100x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 165/606] iio: pressure: abp060mg: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 145/606] iio: light: tsl2772: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 143/606] iio: light: tsl2563: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 162/606] iio: potentiometer: max5432: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 566/606] staging: iio: adt7316: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 163/606] iio: potentiometer: tpl0102: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 159/606] iio: magnetometer: yamaha-yas530: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 179/606] iio: proximity: isl29501: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 070/606] iio: adc: ti-ads1015: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 175/606] iio: pressure: ms5637: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 169/606] iio: pressure: hp03: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH 185/606] iio: temperature: mlx90614: Convert to i2c's .probe_new()
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH 099/606] iio: health: max30102: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 121/606] iio: light: cm3323: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 072/606] iio: cdc: ad7746: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 142/606] iio: light: tcs3472: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 115/606] iio: light: al3320a: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 161/606] iio: potentiometer: ds1803: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 097/606] iio: health: afe4404: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 157/606] iio: magnetometer: mag3110: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 139/606] iio: light: st_uvis25_i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 071/606] iio: cdc: ad7150: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 111/606] iio: imu: st_lsm6dsx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 149/606] iio: light: vcnl4035: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 188/606] iio: temperature: tmp007: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 183/606] iio: proximity: srf08: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 137/606] iio: light: si1133: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 166/606] iio: pressure: bmp280-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 177/606] iio: pressure: t5403: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 131/606] iio: light: max44000: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 150/606] iio: light: veml6030: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 117/606] iio: light: apds9960: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 132/606] iio: light: max44009: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 155/606] iio: magnetometer: bmc150_magn_i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 094/606] iio: gyro: itg3200_core: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 091/606] iio: dac: mcp4725: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 092/606] iio: dac: ti-dac5571: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 170/606] iio: pressure: hp206c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 079/606] iio: chemical: sgp30: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 125/606] iio: light: isl29018: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>