On Sun, 29 Jan 2023 14:20:20 +0100 Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> wrote: > It's easier to see the (lack of) difference between the lines when they > are visually aligned. > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> Applied. Thanks, Jonathan > --- > drivers/iio/chemical/sps30_i2c.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/iio/chemical/sps30_i2c.c b/drivers/iio/chemical/sps30_i2c.c > index 2aed483a2fdec..0cb5d9b65d625 100644 > --- a/drivers/iio/chemical/sps30_i2c.c > +++ b/drivers/iio/chemical/sps30_i2c.c > @@ -68,10 +68,10 @@ static int sps30_i2c_command(struct sps30_state *state, u16 cmd, void *arg, size > /* > * Internally sensor stores measurements in a following manner: > * > - * PM1: upper two bytes, crc8, lower two bytes, crc8 > + * PM1: upper two bytes, crc8, lower two bytes, crc8 > * PM2P5: upper two bytes, crc8, lower two bytes, crc8 > - * PM4: upper two bytes, crc8, lower two bytes, crc8 > - * PM10: upper two bytes, crc8, lower two bytes, crc8 > + * PM4: upper two bytes, crc8, lower two bytes, crc8 > + * PM10: upper two bytes, crc8, lower two bytes, crc8 > * > * What follows next are number concentration measurements and > * typical particle size measurement which we omit. > -- > 2.39.0 >
