It's easier to see the (lack of) difference between the lines when they are visually aligned. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- drivers/iio/chemical/sps30_i2c.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/chemical/sps30_i2c.c b/drivers/iio/chemical/sps30_i2c.c index 2aed483a2fdec..0cb5d9b65d625 100644 --- a/drivers/iio/chemical/sps30_i2c.c +++ b/drivers/iio/chemical/sps30_i2c.c @@ -68,10 +68,10 @@ static int sps30_i2c_command(struct sps30_state *state, u16 cmd, void *arg, size /* * Internally sensor stores measurements in a following manner: * - * PM1: upper two bytes, crc8, lower two bytes, crc8 + * PM1: upper two bytes, crc8, lower two bytes, crc8 * PM2P5: upper two bytes, crc8, lower two bytes, crc8 - * PM4: upper two bytes, crc8, lower two bytes, crc8 - * PM10: upper two bytes, crc8, lower two bytes, crc8 + * PM4: upper two bytes, crc8, lower two bytes, crc8 + * PM10: upper two bytes, crc8, lower two bytes, crc8 * * What follows next are number concentration measurements and * typical particle size measurement which we omit. -- 2.39.0
