The code may be clearer if parameters are not re-purposed to hold temporary results like register values, so introduce local variables as necessary to avoid that. Regroup macros based on chip type, and use the FIELD_PREP() macro instead of a hand-rolled version. Suggested-by: Jonathan Cameron <jic23@xxxxxxxxxx> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx> --- This is a resend of a preparatory patch from a larger series adding support for the AXP192 PMIC[1]. Since I don't think there's much hope of getting it merged in one development cycle, there's no point letting these cleanups sit around unapplied -- apply them whenever convienient! [1] https://lore.kernel.org/all/20221016234335.904212-1-aidanmacdonald.0x0@xxxxxxxxx/ --- drivers/iio/adc/axp20x_adc.c | 61 +++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 29 deletions(-) diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c index 53bf7d4899d2..ab25e6e1ff65 100644 --- a/drivers/iio/adc/axp20x_adc.c +++ b/drivers/iio/adc/axp20x_adc.c @@ -5,6 +5,7 @@ * Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx> */ +#include <linux/bitfield.h> #include <linux/completion.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -22,20 +23,20 @@ #include <linux/mfd/axp20x.h> #define AXP20X_ADC_EN1_MASK GENMASK(7, 0) - #define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7)) + #define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0)) #define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0) #define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1) -#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0)) -#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1) #define AXP20X_ADC_RATE_MASK GENMASK(7, 6) -#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4) -#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK) #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK) + #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK) + +#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4) +#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK) #define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x) #define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK) #define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x)) @@ -234,7 +235,7 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); - int size = 12; + int ret, size; /* * N.B.: Unlike the Chinese datasheets tell, the charging current is @@ -246,10 +247,11 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev, else size = 12; - *val = axp20x_read_variable_width(info->regmap, chan->address, size); - if (*val < 0) - return *val; + ret = axp20x_read_variable_width(info->regmap, chan->address, size); + if (ret < 0) + return ret; + *val = ret; return IIO_VAL_INT; } @@ -257,11 +259,13 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); + int ret; - *val = axp20x_read_variable_width(info->regmap, chan->address, 12); - if (*val < 0) - return *val; + ret = axp20x_read_variable_width(info->regmap, chan->address, 12); + if (ret < 0) + return ret; + *val = ret; return IIO_VAL_INT; } @@ -269,11 +273,13 @@ static int axp813_adc_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); + int ret; - *val = axp20x_read_variable_width(info->regmap, chan->address, 12); - if (*val < 0) - return *val; + ret = axp20x_read_variable_width(info->regmap, chan->address, 12); + if (ret < 0) + return ret; + *val = ret; return IIO_VAL_INT; } @@ -443,27 +449,27 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel, int *val) { struct axp20x_adc_iio *info = iio_priv(indio_dev); + unsigned int regval; int ret; - ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val); + ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, ®val); if (ret < 0) return ret; switch (channel) { case AXP20X_GPIO0_V: - *val &= AXP20X_GPIO10_IN_RANGE_GPIO0; + regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO0, regval); break; case AXP20X_GPIO1_V: - *val &= AXP20X_GPIO10_IN_RANGE_GPIO1; + regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO1, regval); break; default: return -EINVAL; } - *val = *val ? 700000 : 0; - + *val = regval ? 700000 : 0; return IIO_VAL_INT; } @@ -548,7 +554,7 @@ static int axp20x_write_raw(struct iio_dev *indio_dev, long mask) { struct axp20x_adc_iio *info = iio_priv(indio_dev); - unsigned int reg, regval; + unsigned int regmask, regval; /* * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets @@ -560,25 +566,22 @@ static int axp20x_write_raw(struct iio_dev *indio_dev, if (val != 0 && val != 700000) return -EINVAL; - val = val ? 1 : 0; - switch (chan->channel) { case AXP20X_GPIO0_V: - reg = AXP20X_GPIO10_IN_RANGE_GPIO0; - regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val); + regmask = AXP20X_GPIO10_IN_RANGE_GPIO0; + regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, !!val); break; case AXP20X_GPIO1_V: - reg = AXP20X_GPIO10_IN_RANGE_GPIO1; - regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val); + regmask = AXP20X_GPIO10_IN_RANGE_GPIO1; + regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, !!val); break; default: return -EINVAL; } - return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg, - regval); + return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval); } static const struct iio_info axp20x_adc_iio_info = { -- 2.39.2
