Hi Krzysztof,
Appreciate the feedback! Snipping for brevity.
On 3/4/23 3:20 AM, Krzysztof Kozlowski wrote:
...
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 6
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 6
+ items:
+ enum:
The interrupts should be usually strictly ordered and you allow any
combinations. Why?
Why are they optional?
The driver as currently written doesn’t support any interrupts. The
device does not require interrupts to function.
This is the first dt-binding I’ve written, so it’s very possible that
I’ve made a mistake, but I believe any combination of interrupts should
be valid. Each of the interrupts listed represent an independent
physical pin of the mcp960x chip. That pin might not be connected at
all, so it seems to me that any combination of interrupts should be allowed.
MCP9600 and MCP9601 chips have four alert interrupts that trigger when
temperature crosses a threshold (with configurable hysteresis). The
MCP9601 adds short and open circuit detection interrupts.
+ - open
+ - short
+ - alert1
+ - alert2
+ - alert3
+ - alert4
+
+ thermocouple-type:
...
Thanks,
Andy
