[PATCH v4 0/7] Add support for pressure sensor Bosch BMP580

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patchset adds support for the new pressure sensors BMP580 extending
the bmp280 driver.

Patch 1 introduces a minor refactor of the driver structure to change how
the device matching and driver initialization is performed. In place of
the chips ids, the driver_data now contains a pointer to its chip_info.
To perform this change, a series of declarations previously on the core
file were migrated to the shared header file, to allow access to specific
fields on the chip_info on the I2C and SPI drivers. This change is
required because BMP380 and BMP580 have the same chip_id and values would
collide using the chip_id as the driver_data value.
Patch 2 introduces new preinit callback and unifies init logic across all
supported variants.
Patch 3 made calibration callback function optional.
Patch 4 deletes misleading i2c reference on bmp280 Kconfig entry.
Patch 5 extends the bmp280 driver with the new logic to read measurements
and configure the operation parameters for the BMP580 sensors.
Patch 6 updates the devicetree binding docs with the new sensor id.
Patch 7 adds the NVMEM operations to read and program the NVM user range
contained in the non-volatile memory of the BMP580 sensors.

Changes in v4:
* Dropped redundant and excessive verbose comments.
* Change BMP580 temp IIO return type to IIO_VAL_FRACTIONAL_LOG2
* Dropped loop waiting for NVM operation completion and use
  regmap_read_poll_timeout instead.
* Fix various sizeof calls on NVMEM handling codepath.

Changes in v3:
* Refactor driver structure to use chip_info structs as driver_data and
  updated i2c and spi implementations device match codepaths.
* Deleted Kconfig driver title misleading i2c reference.
* Made calibration reading optional as a prerequisite patch in preparation
  for the bmp580 built in compensation.
* Break command helper function in soft-reset helper function and NVM
  operation helper.
* Fixed minor styling issues thorough patches.

Changes in v2:
* For patch 3, fixed missing retcodes reported by the kernel test robot.
* For patch 5, fixed logic paths that left the sensor mutex locked
  reported by the kernel test robot.

Angel Iglesias (7):
  iio: pressure: bmp280: Use chip_info pointers for each chip as driver
    data
  iio: pressure: bmp280: Add preinit callback
  iio: pressure: bmp280: Make read calibration callback optional
  iio: pressure: Kconfig: Delete misleading I2C reference on bmp280
    title
  iio: pressure: bmp280: Add support for new sensor BMP580
  dt-bindings: iio: pressure: bmp085: Add BMP580 compatible string
  iio: pressure: bmp280: Add nvmem operations for BMP580

 .../bindings/iio/pressure/bmp085.yaml         |   2 +
 drivers/iio/pressure/Kconfig                  |   6 +-
 drivers/iio/pressure/bmp280-core.c            | 765 +++++++++++++-----
 drivers/iio/pressure/bmp280-i2c.c             |  45 +-
 drivers/iio/pressure/bmp280-regmap.c          |  60 ++
 drivers/iio/pressure/bmp280-spi.c             |  47 +-
 drivers/iio/pressure/bmp280.h                 | 273 ++++++-
 7 files changed, 953 insertions(+), 245 deletions(-)


base-commit: 91ba2700aa75859957613aedf307a04a83010cee
-- 
2.39.2




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux