The ADS1100 is a 16-bit ADC (at 8 samples per second).
The ADS1000 is similar, but has a fixed data rate.
Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ti-ads1100.c | 467 +++++++++++++++++++++++++++++++++++
3 files changed, 480 insertions(+)
create mode 100644 drivers/iio/adc/ti-ads1100.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 63f80d747cbd..bc1918d87f8e 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1207,6 +1207,18 @@ config TI_ADS1015
This driver can also be built as a module. If so, the module will be
called ti-ads1015.
+config TI_ADS1100
+ tristate "Texas Instruments ADS1100 and ADS1000 ADC"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ If you say yes here you get support for Texas Instruments ADS1100 and
+ ADS1000 ADC chips.
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-ads1100.
+
config TI_ADS7950
tristate "Texas Instruments ADS7950 ADC driver"
depends on SPI && GPIOLIB
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 4ef41a7dfac6..61ef600fab99 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -107,6 +107,7 @@ obj-$(CONFIG_TI_ADC108S102) += ti-adc108s102.o
obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
+obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o
obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
diff --git a/drivers/iio/adc/ti-ads1100.c b/drivers/iio/adc/ti-ads1100.c
new file mode 100644
index 000000000000..0b0d3e5b6bd6
--- /dev/null
+++ b/drivers/iio/adc/ti-ads1100.c
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADS1100 - Texas Instruments Analog-to-Digital Converter
+ *
+ * Copyright (c) 2023, Topic Embedded Products
+ *
+ * IIO driver for ADS1100 and ADS1000 ADC 16-bit I2C
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/iio/sysfs.h>
+
+#define ADS1100_DRV_NAME "ads1100"
+
+/* The ADS1100 has a single byte config register */
+
+/* Conversion in progress bit */
+#define ADS1100_CFG_ST_BSY BIT(7)
+/* Single conversion bit */
+#define ADS1100_CFG_SC BIT(4)
+/* Data rate */
+#define ADS1100_DR_MASK (BIT(3) | BIT(2))
+#define ADS1100_DR_SHIFT 2
+/* Gain */
+#define ADS1100_PGA_MASK (BIT(1) | BIT(0))
+
+#define ADS1100_CONTINUOUS 0
+#define ADS1100_SINGLESHOT ADS1100_CFG_SC
+
+#define ADS1100_SLEEP_DELAY_MS 2000
+
+static const int ads1100_data_rate[] = {128, 32, 16, 8};
+static const int ads1100_data_rate_scale[] = {2048, 8192, 16384, 32768};
+static const int ads1100_gain[] = {1, 2, 4, 8};
+
+struct ads1100_data {
+ struct i2c_client *client;
+ struct regulator *reg_vdd;
+ struct mutex lock;
+ u8 config;
+ bool supports_data_rate; /* Only the ADS1100 can select the rate */
+};
+
+static const struct iio_chan_spec ads1100_channel = {
+ .type = IIO_VOLTAGE,
+ .differential = 0,
+ .indexed = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_all =
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_HARDWAREGAIN) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_shared_by_all_available =
+ BIT(IIO_CHAN_INFO_HARDWAREGAIN) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .shift = 0,
+ .endianness = IIO_CPU,
+ },
+ .datasheet_name = "AIN",
+};
+
+static int ads1100_set_config_bits(struct ads1100_data *data, u8 mask, u8 value)
+{
+ int ret;
+ u8 config = (data->config & ~mask) | value;
+
+ if (data->config == config)
+ return 0; /* Already done */
+
+ ret = i2c_master_send(data->client, &config, 1);
+ if (ret < 0)
+ return ret;
+
+ data->config = config;
+ return 0;
+};
+
+static int ads1100_set_conv_mode(struct ads1100_data *data, u8 flag)
+{
+ return ads1100_set_config_bits(data, ADS1100_CFG_SC, flag);
+};
+
+static int ads1100_data_rate_index(struct ads1100_data *data)
+{
+ return (data->config & ADS1100_DR_MASK) >> ADS1100_DR_SHIFT;
+}
+
+static int ads1100_pga_index(struct ads1100_data *data)
+{
+ return (data->config & ADS1100_PGA_MASK);
+}
+
+/* Calculate full-scale value */
+static int ads1100_full_scale(struct ads1100_data *data)
+{
+ return ads1100_data_rate_scale[ads1100_data_rate_index(data)] *
+ ads1100_gain[ads1100_pga_index(data)];
+
+}
+
+#ifdef CONFIG_PM
+static int ads1100_set_power_state(struct ads1100_data *data, bool on)
+{
+ int ret;
+ struct device *dev = &data->client->dev;
+
+ if (on) {
+ ret = pm_runtime_resume_and_get(dev);
+ } else {
+ pm_runtime_mark_last_busy(dev);
+ ret = pm_runtime_put_autosuspend(dev);
+ }
+
+ return ret < 0 ? ret : 0;
+}
+
+#else /* !CONFIG_PM */
+
+static int ads1100_set_power_state(struct ads1100_data *data, bool on)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_PM */
+
+static int ads1100_get_adc_result(struct ads1100_data *data, int chan, int *val)
+{
+ int ret;
+ u8 buffer[2];
+
+ if (chan != 0)
+ return -EINVAL;
+
+ ret = i2c_master_recv(data->client, buffer, sizeof(buffer));
+ if (ret < 0) {
+ dev_err(&data->client->dev, "I2C read fail: %d\n", ret);
+ return ret;
+ }
+
+ *val = (s16)(((u16)buffer[0] << 8) | buffer[1]);
+ return 0;
+}
+
+static int ads1100_set_gain(struct ads1100_data *data, int gain)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ads1100_gain); ++i) {
+ if (ads1100_gain[i] == gain) {
+ return ads1100_set_config_bits(
+ data, ADS1100_PGA_MASK, i);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int ads1100_set_data_rate(struct ads1100_data *data, int chan, int rate)
+{
+ int i;
+ int size = data->supports_data_rate ? ARRAY_SIZE(ads1100_data_rate) : 1;
+
+ for (i = 0; i < size; ++i) {
+ if (ads1100_data_rate[i] == rate) {
+ return ads1100_set_config_bits(
+ data, ADS1100_DR_MASK, i << ADS1100_DR_SHIFT);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int ads1100_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ struct ads1100_data *data = iio_priv(indio_dev);
+
+ if (chan->type != IIO_VOLTAGE)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *type = IIO_VAL_INT;
+ *vals = ads1100_data_rate;
+ if (data->supports_data_rate)
+ *length = ARRAY_SIZE(ads1100_data_rate);
+ else
+ *length = 1;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ *type = IIO_VAL_INT;
+ *vals = ads1100_gain;
+ *length = ARRAY_SIZE(ads1100_gain);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ads1100_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ struct ads1100_data *data = iio_priv(indio_dev);
+
+ dev_info(&data->client->dev, "%s %ld\n", __func__, mask);
+
+ mutex_lock(&data->lock);
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ break;
+
+ ret = ads1100_set_power_state(data, true);
+ if (ret < 0)
+ goto release_direct;
+
+ ret = ads1100_get_adc_result(data, chan->address, val);
+ if (ret < 0) {
+ ads1100_set_power_state(data, false);
+ goto release_direct;
+ }
+
+ ret = ads1100_set_power_state(data, false);
+ if (ret < 0)
+ goto release_direct;
+
+ ret = IIO_VAL_INT;
+release_direct:
+ iio_device_release_direct_mode(indio_dev);
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ ret = regulator_get_voltage(data->reg_vdd);
+ if (ret > 0) {
+ /* full-scale is the supply voltage (microvolts now) */
+ *val = ret / 1000; /* millivolts, range 27000..50000 */
+ *val2 = 1000 * ads1100_full_scale(data);
+ ret = IIO_VAL_FRACTIONAL;
+ }
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = ads1100_data_rate[ads1100_data_rate_index(data)];
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ *val = ads1100_gain[ads1100_pga_index(data)];
+ *val2 = 0;
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static int ads1100_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct ads1100_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->lock);
+ switch (mask) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ ret = ads1100_set_gain(data, val);
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = ads1100_set_data_rate(data, chan->address, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static const struct iio_info ads1100_info = {
+ .read_avail = ads1100_read_avail,
+ .read_raw = ads1100_read_raw,
+ .write_raw = ads1100_write_raw,
+};
+
+static int ads1100_setup(struct ads1100_data *data)
+{
+ int ret;
+ u8 buffer[3];
+
+ /* Setup continuous sampling mode at 8sps */
+ buffer[0] = ADS1100_DR_MASK | ADS1100_CONTINUOUS;
+ ret = i2c_master_send(data->client, buffer, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_master_recv(data->client, buffer, sizeof(buffer));
+ if (ret < 0)
+ return ret;
+
+ /* Config register returned in third byte, strip away the busy status */
+ data->config = buffer[2] & ~ADS1100_CFG_ST_BSY;
+
+ /* Detect the sample rate capability by checking the DR bits */
+ data->supports_data_rate = !!(buffer[2] & ADS1100_DR_MASK);
+
+ return 0;
+}
+
+static int ads1100_probe(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev;
+ struct ads1100_data *data;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+ mutex_init(&data->lock);
+
+ indio_dev->name = ADS1100_DRV_NAME;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = &ads1100_channel;
+ indio_dev->num_channels = 1;
+ indio_dev->info = &ads1100_info;
+
+ data->reg_vdd = devm_regulator_get(&client->dev, "vdd");
+ if (IS_ERR(data->reg_vdd))
+ return PTR_ERR(data->reg_vdd);
+
+ ret = regulator_enable(data->reg_vdd);
+ if (ret < 0)
+ return ret;
+
+ ret = ads1100_setup(data);
+ if (ret) {
+ dev_err(&client->dev, "Failed to communicate with device\n");
+ goto exit_regulator;
+ }
+
+ ret = pm_runtime_set_active(&client->dev);
+ if (ret)
+ goto exit_regulator;
+
+ pm_runtime_set_autosuspend_delay(&client->dev, ADS1100_SLEEP_DELAY_MS);
+ pm_runtime_use_autosuspend(&client->dev);
+ pm_runtime_enable(&client->dev);
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to register IIO device\n");
+ return ret;
+ }
+
+ return 0;
+
+exit_regulator:
+ regulator_disable(data->reg_vdd);
+ return ret;
+}
+
+static void ads1100_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct ads1100_data *data = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ ads1100_set_conv_mode(data, ADS1100_SINGLESHOT);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+}
+
+#ifdef CONFIG_PM
+static int ads1100_runtime_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct ads1100_data *data = iio_priv(indio_dev);
+
+ ads1100_set_conv_mode(data, ADS1100_SINGLESHOT);
+ regulator_disable(data->reg_vdd);
+
+ return 0;
+}
+
+static int ads1100_runtime_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct ads1100_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(data->reg_vdd);
+ if (ret) {
+ dev_err(&data->client->dev, "Failed to enable Vdd\n");
+ return ret;
+ }
+
+ /*
+ * We'll always change the mode bit in the config register, so there is
+ * no need here to "force" a write to the config register. If the device
+ * has been power-cycled, we'll re-write its config register now.
+ */
+ return ads1100_set_conv_mode(data, ADS1100_CONTINUOUS);
+}
+#endif
+
+static const struct dev_pm_ops ads1100_pm_ops = {
+ SET_RUNTIME_PM_OPS(ads1100_runtime_suspend,
+ ads1100_runtime_resume, NULL)
+};
+
+static const struct i2c_device_id ads1100_id[] = {
+ { "ads1100", },
+ { "ads1000", },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ads1100_id);
+
+static const struct of_device_id ads1100_of_match[] = {
+ { .compatible = "ti,ads1100", },
+ { .compatible = "ti,ads1000", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ads1100_of_match);
+
+static struct i2c_driver ads1100_driver = {
+ .driver = {
+ .name = ADS1100_DRV_NAME,
+ .of_match_table = ads1100_of_match,
+ .pm = &ads1100_pm_ops,
+ },
+ .probe_new = ads1100_probe,
+ .remove = ads1100_remove,
+ .id_table = ads1100_id,
+};
+
+module_i2c_driver(ads1100_driver);
+
+MODULE_AUTHOR("Mike Looijmans <mike.looijmans@xxxxxxxx>");
+MODULE_DESCRIPTION("Texas Instruments ADS1100 ADC driver");
+MODULE_LICENSE("GPL");
--
2.17.1
