If a second dummy client that talks to the actual I2C address was
created in probe(), there should be a proper cleanup on driver and
device removal to avoid leakage.
So unregister the dummy client via another callback.
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Suggested-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Fixes: c1e62062ff54 ("iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2152281
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
v4:
- Remove logging kmalloc failures.
v3:
- Use devm_add_action_or_reset() in a correct place.
- Wording.
v2:
- Use devm_add_action_or_reset() instead of remove() callback to avoid
race.
drivers/iio/light/cm32181.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index b1674a5bfa368..d4a34a3bf00d9 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -429,6 +429,14 @@ static const struct iio_info cm32181_info = {
.attrs = &cm32181_attribute_group,
};
+static void cm32181_unregister_dummy_client(void *data)
+{
+ struct i2c_client *client = data;
+
+ /* Unregister the dummy client */
+ i2c_unregister_device(client);
+}
+
static int cm32181_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
@@ -460,6 +468,10 @@ static int cm32181_probe(struct i2c_client *client)
client = i2c_acpi_new_device(dev, 1, &board_info);
if (IS_ERR(client))
return PTR_ERR(client);
+
+ ret = devm_add_action_or_reset(dev, cm32181_unregister_dummy_client, client);
+ if (ret)
+ return ret;
}
cm32181 = iio_priv(indio_dev);
--
2.34.1
